[hylafax-users] V.21 signal reception timeout +FCERROR

["dev.malst" <dev.malst@xxxxxxxxxxxx>]

Can anyone help me to analyze this error ?

 

 

Fax not received.

 

      V.21 signal reception timeout; expected page possibly not received in full

 

Session log follows:

Nov 29 09:37:17.15: [ 3155]: SESSION BEGIN 000000437 390297226435

Nov 29 09:37:17.15: [ 3155]: HylaFAX (tm) Version 6.0.5

Nov 29 09:37:17.15: [ 3155]: <-- [4:ATA\r]

Nov 29 09:37:25.41: [ 3155]: --> [7:CONNECT]

Nov 29 09:37:25.41: [ 3155]: ANSWER: FAX CONNECTION  DEVICE '/dev/apsfax435'

Nov 29 09:37:25.41: [ 3155]: RECV FAX: begin

Nov 29 09:37:25.41: [ 3155]: <-- data [32]

Nov 29 09:37:25.41: [ 3155]: <-- data [2]

Nov 29 09:37:25.44: [ 3155]: --> [7:CONNECT]

Nov 29 09:37:25.44: [ 3155]: <-- data [23]

Nov 29 09:37:25.44: [ 3155]: <-- data [2]

Nov 29 09:37:25.46: [ 3155]: --> [7:CONNECT]

Nov 29 09:37:25.46: [ 3155]: <-- data [13]

Nov 29 09:37:25.46: [ 3155]: <-- data [2]

Nov 29 09:37:27.67: [ 3155]: --> [2:OK]

Nov 29 09:37:27.67: [ 3155]: <-- [9:AT+FRH=3\r]

Nov 29 09:37:28.84: [ 3155]: --> [7:CONNECT]

Nov 29 09:37:30.68: [ 3155]: --> [2:OK]

Nov 29 09:37:30.68: [ 3155]: RECV recv TSI (sender id)

Nov 29 09:37:30.68: [ 3155]: REMOTE TSI "050772084"

Nov 29 09:37:30.68: [ 3155]: <-- [9:AT+FRH=3\r]

Nov 29 09:37:30.70: [ 3155]: --> [7:CONNECT]

Nov 29 09:37:31.03: [ 3155]: --> [2:OK]

Nov 29 09:37:31.03: [ 3155]: RECV recv DCS (command signal)

Nov 29 09:37:31.03: [ 3155]: REMOTE wants 9600 bit/s

Nov 29 09:37:31.03: [ 3155]: REMOTE wants A4 page width (215 mm)

Nov 29 09:37:31.03: [ 3155]: REMOTE wants unlimited page length

Nov 29 09:37:31.03: [ 3155]: REMOTE wants 3.85 line/mm

Nov 29 09:37:31.03: [ 3155]: REMOTE wants 1-D MH

Nov 29 09:37:31.03: [ 3155]: RECV training at v.29 9600 bit/s

Nov 29 09:37:31.03: [ 3155]: <-- [10:AT+FRM=96\r]

Nov 29 09:37:31.43: [ 3155]: --> [7:CONNECT]

Nov 29 09:37:33.00: [ 3155]: RECV: TCF 1888 bytes, 2% non-zero, 1001 zero-run

Nov 29 09:37:33.00: [ 3155]: RECV: reject TCF (zero run too short, min 1200)

Nov 29 09:37:33.01: [ 3155]: --> [10:NO CARRIER]

Nov 29 09:37:33.01: [ 3155]: <-- [9:AT+FRS=7\r]

Nov 29 09:37:33.09: [ 3155]: --> [2:OK]

Nov 29 09:37:33.09: [ 3155]: <-- [9:AT+FTH=3\r]

Nov 29 09:37:33.96: [ 3155]: --> [7:CONNECT]

Nov 29 09:37:33.96: [ 3155]: <-- data [3]

Nov 29 09:37:33.96: [ 3155]: <-- data [2]

Nov 29 09:37:34.28: [ 3155]: --> [2:OK]

Nov 29 09:37:34.28: [ 3155]: TRAINING failed

Nov 29 09:37:34.28: [ 3155]: <-- [9:AT+FRH=3\r]

Nov 29 09:37:37.30: [ 3155]: --> [7:CONNECT]

Nov 29 09:37:39.17: [ 3155]: --> [2:OK]

Nov 29 09:37:39.17: [ 3155]: RECV recv TSI (sender id)

Nov 29 09:37:39.17: [ 3155]: REMOTE TSI "050772084"

Nov 29 09:37:39.17: [ 3155]: <-- [9:AT+FRH=3\r]

Nov 29 09:37:39.18: [ 3155]: --> [7:CONNECT]

Nov 29 09:37:39.52: [ 3155]: --> [2:OK]

Nov 29 09:37:39.52: [ 3155]: RECV recv DCS (command signal)

Nov 29 09:37:39.52: [ 3155]: REMOTE wants 9600 bit/s

Nov 29 09:37:39.52: [ 3155]: REMOTE wants A4 page width (215 mm)

Nov 29 09:37:39.52: [ 3155]: REMOTE wants unlimited page length

Nov 29 09:37:39.52: [ 3155]: REMOTE wants 3.85 line/mm

Nov 29 09:37:39.52: [ 3155]: REMOTE wants 1-D MH

Nov 29 09:37:39.52: [ 3155]: RECV training at v.29 9600 bit/s

Nov 29 09:37:39.52: [ 3155]: <-- [10:AT+FRM=96\r]

Nov 29 09:37:39.91: [ 3155]: --> [7:CONNECT]

Nov 29 09:37:41.48: [ 3155]: RECV: TCF 1888 bytes, 1% non-zero, 1825 zero-run

Nov 29 09:37:41.49: [ 3155]: --> [10:NO CARRIER]

Nov 29 09:37:41.49: [ 3155]: <-- [9:AT+FRS=7\r]

Nov 29 09:37:41.57: [ 3155]: --> [2:OK]

Nov 29 09:37:41.57: [ 3155]: TRAINING succeeded

Nov 29 09:37:41.57: [ 3155]: <-- [9:AT+FTH=3\r]

Nov 29 09:37:42.44: [ 3155]: --> [7:CONNECT]

Nov 29 09:37:42.44: [ 3155]: <-- data [3]

Nov 29 09:37:42.44: [ 3155]: <-- data [2]

Nov 29 09:37:42.76: [ 3155]: --> [2:OK]

Nov 29 09:37:42.76: [ 3155]: <-- [10:AT+FRM=96\r]

Nov 29 09:37:43.80: [ 3155]: --> [8:+FCERROR]

Nov 29 09:37:43.80: [ 3155]: <-- [10:AT+FRM=96\r]

Nov 29 09:37:44.62: [ 3155]: --> [7:CONNECT]

Nov 29 09:37:44.62: [ 3155]: RECV: begin page

Nov 29 09:37:44.73: [ 3155]: RECV: 0 total lines, 0 bad lines, 0 consecutive bad lines

Nov 29 09:37:44.73: [ 3155]: RECV: REJECT page quality, too few scanlines: 0

Nov 29 09:37:44.73: [ 3155]: RECV: end page

Nov 29 09:37:44.73: [ 3155]: --> [10:NO CARRIER]

Nov 29 09:37:44.73: [ 3155]: <-- [9:AT+FRH=3\r]

Nov 29 09:37:54.85: [ 3155]: --> [10:NO CARRIER]

Nov 29 09:37:54.85: [ 3155]: MODEM No carrier

Nov 29 09:37:54.85: [ 3155]: RECV FAX (000000437): recvq/fax000000437.tif from 050772084, route to <unspecified>, 0 pages in 0:00:29

Nov 29 09:37:54.85: [ 3155]: RECV FAX: V.21 signal reception timeout; expected page possibly not received in full

Nov 29 09:37:54.85: [ 3155]: <-- [9:AT+FRS=7\r]

Nov 29 09:37:55.17: [ 3155]: --> [2:OK]

Nov 29 09:37:55.17: [ 3155]: <-- [9:AT+FTH=3\r]

Nov 29 09:37:56.13: [ 3155]: --> [7:CONNECT]

Nov 29 09:37:56.13: [ 3155]: <-- data [3]

Nov 29 09:37:56.13: [ 3155]: <-- data [2]

Nov 29 09:37:56.56: [ 3155]: --> [2:OK]

Nov 29 09:37:56.56: [ 3155]: RECV FAX (000000437): session with 050772084 terminated abnormally: V.21 signal reception timeout; expected page possibly not received in full

Nov 29 09:37:56.56: [ 3155]: RECV FAX: bin/faxrcvd "recvq/fax000000437.tif" "apsfax435" "000000437" "V.21 signal reception timeout; expected page possibly not received in full"

Nov 29 09:37:56.56: [ 3155]: RECV FAX: end

Nov 29 09:37:56.56: [ 3155]: V.21 signal reception timeout; expected page possibly not received in full