[hylafax-users] PPM received with no image data + strange chars in response to data

["dev.malst" <dev.malst@xxxxxxxxxxxx>]

Can anyone help me to analyze this error ?

 

 

 

Fax not received.

 

      PPM received with no image data.  To continue risks receipt confirmation.

 

Session log follows:

Nov 29 14:29:54.77: [ 3153]: SESSION BEGIN 000000463 390297226429

Nov 29 14:29:54.77: [ 3153]: HylaFAX (tm) Version 6.0.5

Nov 29 14:29:54.77: [ 3153]: <-- [4:ATA\r]

Nov 29 14:30:06.14: [ 3153]: --> [7:CONNECT]

Nov 29 14:30:06.14: [ 3153]: ANSWER: FAX CONNECTION  DEVICE '/dev/apsfax429'

Nov 29 14:30:06.14: [ 3153]: RECV FAX: begin

Nov 29 14:30:06.14: [ 3153]: <-- data [32]

Nov 29 14:30:06.14: [ 3153]: <-- data [2]

Nov 29 14:30:06.17: [ 3153]: --> [7:CONNECT]

Nov 29 14:30:06.17: [ 3153]: <-- data [23]

Nov 29 14:30:06.17: [ 3153]: <-- data [2]

Nov 29 14:30:06.19: [ 3153]: --> [7:CONNECT]

Nov 29 14:30:06.19: [ 3153]: <-- data [13]

Nov 29 14:30:06.19: [ 3153]: <-- data [2]

Nov 29 14:30:08.40: [ 3153]: --> [2:OK]

Nov 29 14:30:08.40: [ 3153]: <-- [9:AT+FRH=3\r]

Nov 29 14:30:15.40: [ 3153]: --> [0:]

Nov 29 14:30:15.40: [ 3153]: MODEM <Empty line>

Nov 29 14:30:15.40: [ 3153]: <-- data [1]

Nov 29 14:30:15.41: [ 3153]: --> [2:

---

]

Nov 29 14:30:15.41: [ 3153]: --> [2:OK]

Nov 29 14:30:15.41: [ 3153]: <-- [9:AT+FRS=7\r]

Nov 29 14:30:15.49: [ 3153]: --> [2:OK]

Nov 29 14:30:15.49: [ 3153]: <-- [9:AT+FTH=3\r]

Nov 29 14:30:16.36: [ 3153]: --> [7:CONNECT]

Nov 29 14:30:16.36: [ 3153]: <-- data [32]

Nov 29 14:30:16.36: [ 3153]: <-- data [2]

Nov 29 14:30:16.39: [ 3153]: --> [7:CONNECT]

Nov 29 14:30:16.39: [ 3153]: <-- data [23]

Nov 29 14:30:16.39: [ 3153]: <-- data [2]

Nov 29 14:30:16.41: [ 3153]: --> [7:CONNECT]

Nov 29 14:30:16.41: [ 3153]: <-- data [13]

Nov 29 14:30:16.41: [ 3153]: <-- data [2]

Nov 29 14:30:18.62: [ 3153]: --> [2:OK]

Nov 29 14:30:18.62: [ 3153]: <-- [9:AT+FRH=3\r]

Nov 29 14:30:19.79: [ 3153]: --> [7:CONNECT]

Nov 29 14:30:21.64: [ 3153]: --> [2:OK]

Nov 29 14:30:21.64: [ 3153]: RECV recv TSI (sender id)

Nov 29 14:30:21.64: [ 3153]: REMOTE TSI "050747077"

Nov 29 14:30:21.64: [ 3153]: <-- [9:AT+FRH=3\r]

Nov 29 14:30:21.65: [ 3153]: --> [7:CONNECT]

Nov 29 14:30:21.98: [ 3153]: --> [2:OK]

Nov 29 14:30:21.98: [ 3153]: RECV recv DCS (command signal)

Nov 29 14:30:21.98: [ 3153]: REMOTE wants 9600 bit/s

Nov 29 14:30:21.98: [ 3153]: REMOTE wants A4 page width (215 mm)

Nov 29 14:30:21.98: [ 3153]: REMOTE wants unlimited page length

Nov 29 14:30:21.98: [ 3153]: REMOTE wants 3.85 line/mm

Nov 29 14:30:21.98: [ 3153]: REMOTE wants 1-D MH

Nov 29 14:30:21.98: [ 3153]: RECV training at v.29 9600 bit/s

Nov 29 14:30:21.98: [ 3153]: <-- [10:AT+FRM=96\r]

Nov 29 14:30:22.38: [ 3153]: --> [7:CONNECT]

Nov 29 14:30:23.71: [ 3153]: RECV: TCF 1584 bytes, 26% non-zero, 1159 zero-run

Nov 29 14:30:23.71: [ 3153]: RECV: reject TCF (too many non-zero, max 10%)

Nov 29 14:30:23.71: [ 3153]: RECV: reject TCF (zero run too short, min 1200)

Nov 29 14:30:23.72: [ 3153]: --> [10:NO CARRIER]

Nov 29 14:30:23.72: [ 3153]: <-- [9:AT+FRS=7\r]

Nov 29 14:30:23.80: [ 3153]: --> [2:OK]

Nov 29 14:30:23.80: [ 3153]: <-- [9:AT+FTH=3\r]

Nov 29 14:30:24.67: [ 3153]: --> [7:CONNECT]

Nov 29 14:30:24.67: [ 3153]: <-- data [3]

Nov 29 14:30:24.67: [ 3153]: <-- data [2]

Nov 29 14:30:24.99: [ 3153]: --> [2:OK]

Nov 29 14:30:24.99: [ 3153]: TRAINING failed

Nov 29 14:30:24.99: [ 3153]: <-- [9:AT+FRH=3\r]

Nov 29 14:30:27.02: [ 3153]: --> [7:CONNECT]

Nov 29 14:30:28.90: [ 3153]: --> [2:OK]

Nov 29 14:30:28.90: [ 3153]: RECV recv TSI (sender id)

Nov 29 14:30:28.90: [ 3153]: REMOTE TSI "050747077"

Nov 29 14:30:28.90: [ 3153]: <-- [9:AT+FRH=3\r]

Nov 29 14:30:28.91: [ 3153]: --> [7:CONNECT]

Nov 29 14:30:29.24: [ 3153]: --> [2:OK]

Nov 29 14:30:29.24: [ 3153]: RECV recv DCS (command signal)

Nov 29 14:30:29.24: [ 3153]: REMOTE wants 9600 bit/s

Nov 29 14:30:29.24: [ 3153]: REMOTE wants A4 page width (215 mm)

Nov 29 14:30:29.24: [ 3153]: REMOTE wants unlimited page length

Nov 29 14:30:29.24: [ 3153]: REMOTE wants 3.85 line/mm

Nov 29 14:30:29.24: [ 3153]: REMOTE wants 1-D MH

Nov 29 14:30:29.24: [ 3153]: RECV training at v.29 9600 bit/s

Nov 29 14:30:29.24: [ 3153]: <-- [10:AT+FRM=96\r]

Nov 29 14:30:29.63: [ 3153]: --> [7:CONNECT]

Nov 29 14:30:30.96: [ 3153]: RECV: TCF 1584 bytes, 0% non-zero, 1574 zero-run

Nov 29 14:30:30.97: [ 3153]: --> [10:NO CARRIER]

Nov 29 14:30:30.97: [ 3153]: <-- [9:AT+FRS=7\r]

Nov 29 14:30:31.05: [ 3153]: --> [2:OK]

Nov 29 14:30:31.05: [ 3153]: TRAINING succeeded

Nov 29 14:30:31.05: [ 3153]: <-- [9:AT+FTH=3\r]

Nov 29 14:30:31.91: [ 3153]: --> [7:CONNECT]

Nov 29 14:30:31.91: [ 3153]: <-- data [3]

Nov 29 14:30:31.91: [ 3153]: <-- data [2]

Nov 29 14:30:32.24: [ 3153]: --> [2:OK]

Nov 29 14:30:32.24: [ 3153]: <-- [10:AT+FRM=96\r]

Nov 29 14:30:42.14: [ 3153]: <-- data [1]

Nov 29 14:30:42.15: [ 3153]: --> [2:

---

]

Nov 29 14:30:42.15: [ 3153]: --> [2:OK]

Nov 29 14:30:42.15: [ 3153]: <-- [9:AT+FRH=3\r]

Nov 29 14:30:42.72: [ 3153]: --> [7:CONNECT]

Nov 29 14:30:43.94: [ 3153]: --> [10:NO CARRIER]

Nov 29 14:30:43.94: [ 3153]: MODEM No carrier

Nov 29 14:30:43.94: [ 3153]: <-- [10:AT+FRS=21\r]

Nov 29 14:30:52.79: [ 3153]: --> [2:OK]

Nov 29 14:30:52.79: [ 3153]: <-- [9:AT+FTH=3\r]

Nov 29 14:30:53.65: [ 3153]: --> [7:CONNECT]

Nov 29 14:30:53.66: [ 3153]: <-- data [3]

Nov 29 14:30:53.66: [ 3153]: <-- data [2]

Nov 29 14:30:53.97: [ 3153]: --> [2:OK]

Nov 29 14:30:53.97: [ 3153]: RECV send CRP (command repeat)

Nov 29 14:30:53.97: [ 3153]: <-- [9:AT+FRH=3\r]

Nov 29 14:30:56.19: [ 3153]: --> [7:CONNECT]

Nov 29 14:30:57.49: [ 3153]: --> [2:OK]

Nov 29 14:30:57.49: [ 3153]: RECV recv MPS (more pages, same document)

Nov 29 14:30:57.49: [ 3153]: <-- [9:AT+FRS=7\r]

Nov 29 14:30:57.67: [ 3153]: --> [2:OK]

Nov 29 14:30:57.67: [ 3153]: <-- [9:AT+FTH=3\r]

Nov 29 14:30:58.54: [ 3153]: --> [7:CONNECT]

Nov 29 14:30:58.54: [ 3153]: <-- data [3]

Nov 29 14:30:58.54: [ 3153]: <-- data [2]

Nov 29 14:30:58.86: [ 3153]: --> [2:OK]

Nov 29 14:30:58.86: [ 3153]: RECV send DCN (disconnect)

Nov 29 14:30:58.86: [ 3153]: RECV FAX (000000463): recvq/fax000000463.tif from 050747077, route to <unspecified>, 0 pages in 0:00:52

Nov 29 14:30:58.86: [ 3153]: RECV FAX: PPM received with no image data.  To continue risks receipt confirmation.

Nov 29 14:30:58.86: [ 3153]: RECV FAX (000000463): session with 050747077 terminated abnormally: PPM received with no image data.  To continue risks receipt confirmation.

Nov 29 14:30:58.86: [ 3153]: RECV FAX: bin/faxrcvd "recvq/fax000000463.tif" "apsfax429" "000000463" "PPM received with no image data.  To continue risks receipt confirmation."

Nov 29 14:30:58.86: [ 3153]: RECV FAX: end

Nov 29 14:30:58.86: [ 3153]: PPM received with no image data.  To continue risks receipt confirmation.

Nov 29 14:30:58.86: [ 3153]: SESSION END