HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] faxaddmodem acm driver



On 9/15/2010 7:24 PM, Darren Nickerson wrote:
> 
> On Sep 15, 2010, at 9:09 PM, ben wrote:
> 
>> Gentlemen,
>> I am having a difficulty. One of our fax modems died, so after perusing
>> the list archives we decided to obtain a controller based usb modem (USB
>> ID 0baf:0303 U.S. Robotics) for use in our hylafax setup, which was
>> recently upgraded to 6.0.4.
> 
> I vote that we hunt down whatever list archive posting pointed you in that direction and have a ritual burning of it. Honestly, you could not have a worse combination that USR and USB.
> 
> I recommend a Mainpine board or, if budget does not permit that then a Multitech external serial modem.
> 
> What if you run probemodem and manually set the speed? (man probemodem for more info)
> 
> -Darren
> 
the output of probemodem is below. minicom continues to function both
before and after the command (atz returns OK). by the way the path to
fuser is /bin/fuser and there are no processes using this device before
running probemodem, but when I kill probemodem it leaves a '/bin/stty
clocal' running.

ben@server1a:~$ sudo /usr/sbin/probemodem -s 9600 -c atz ttyACM0
Hmm, there does not appear to be an fuser command on your machine.
This means that I am unable to ensure that all processes using the
modem have been killed.  I will keep going, but beware that you may
have competition for the modem.

Now we are going to probe the tty port.  This takes a few seconds,
so be patient.  Note that if you do not have the modem cabled to
the port, or the modem is turned off, this may hang (just go and
cable up the modem or turn it on, or whatever).

Using user-specified 9600 to talk to modem.

Hmm, something seems to be hung, check your modem eh?

> ____________________ HylaFAX(tm) Users Mailing List _______________________
>   To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
>   *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
> 


-- 
Ben Hildred
Estimator
Applied Plastic Coatings, Inc.
5000 Tabor St.
Wheat Ridge, CO 80033
303 424 9200
F: 303 424 8800
ben@xxxxxxxxxxxxxxxxxx
http://appliedplastic.com


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




Project hosted by iFAX Solutions