 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
[hylafax-users] Communication problems
- To: hylafax-users@xxxxxxxxxxx
- Subject: [hylafax-users] Communication problems
- From: "Daniel L. Miller" <dmiller@xxxxxxxxx>
- Reply-to: dmiller@xxxxxxxxx
- Date: Thu, 16 Sep 2010 16:37:55 -0700
Hi!
Been having intermittent problems for a while. It appears to be a magic combination of my equipment and certain remote sites - most work great, but don't. The majority of the problems lie with sending from my end.
Physical setup is a T-1 feeding my PBX, which then provides a pair of analog signals to my two USR Sportster modems.
I've tried adding "Use2d: false" and a couple different "Class1RM/TMQueryCmd" options - but so far no luck (by the way - do I need to place this in the /etc/hylafax/config file, the config.ttySx files, or both?)
Attached is a log of a recent send problem.
-- Daniel
Sep 16 16:34:21.46: [ 6697]: SESSION BEGIN 000003129 17024557347 Sep 16 16:34:21.46: [ 6697]: HylaFAX (tm) Version 6.0.4 Sep 16 16:34:21.46: [ 6697]: SEND FAX: JOB 254 DEST 4557347 COMMID 000003129 DEVICE '/dev/ttyS3' FROM 'dmiller <dmiller@xxxxxxxxx>' USER dmiller Sep 16 16:34:21.47: [ 6697]: <-- [12:AT+FCLASS=1\r] Sep 16 16:34:21.56: [ 6697]: --> [2:OK] Sep 16 16:34:21.56: [ 6697]: DIAL 4557347 Sep 16 16:34:21.56: [ 6697]: <-- [12:ATDT4557347\r] Sep 16 16:34:41.88: [ 6697]: --> [7:CONNECT] Sep 16 16:34:42.40: [ 6697]: --> [2:OK] Sep 16 16:34:42.40: [ 6697]: REMOTE NSF "86 00 66 00 00 E4 01 C8 40 E0 03 18 80 00 00" Sep 16 16:34:42.40: [ 6697]: NSF remote fax equipment: unknown - Korea 66 Sep 16 16:34:42.40: [ 6697]: <-- [9:AT+FRH=3\r] Sep 16 16:34:42.49: [ 6697]: --> [7:CONNECT] Sep 16 16:34:43.16: [ 6697]: --> [2:OK] Sep 16 16:34:43.16: [ 6697]: REMOTE CSI "7024557347" Sep 16 16:34:43.16: [ 6697]: <-- [9:AT+FRH=3\r] Sep 16 16:34:43.26: [ 6697]: --> [7:CONNECT] Sep 16 16:34:43.65: [ 6697]: --> [2:OK] Sep 16 16:34:43.65: [ 6697]: REMOTE best rate 33600 bit/s Sep 16 16:34:43.65: [ 6697]: REMOTE max A4 page width (215 mm) Sep 16 16:34:43.65: [ 6697]: REMOTE max unlimited page length Sep 16 16:34:43.65: [ 6697]: REMOTE best vres R16 x 15.4 line/mm Sep 16 16:34:43.65: [ 6697]: REMOTE format support: MH, MR, MMR, JBIG Sep 16 16:34:43.65: [ 6697]: REMOTE supports T.30 Annex A, 256-byte ECM Sep 16 16:34:43.65: [ 6697]: REMOTE best 10 ms/scanline Sep 16 16:34:43.65: [ 6697]: USE 14400 bit/s Sep 16 16:34:43.65: [ 6697]: USE error correction mode Sep 16 16:34:43.65: [ 6697]: SEND file "docq/cover251;30" Sep 16 16:34:43.65: [ 6697]: USE A4 page width (215 mm) Sep 16 16:34:43.65: [ 6697]: USE unlimited page length Sep 16 16:34:43.65: [ 6697]: USE 3.85 line/mm Sep 16 16:34:43.65: [ 6697]: USE 2-D MMR Sep 16 16:34:43.65: [ 6697]: USE 0 ms/scanline Sep 16 16:34:43.65: [ 6697]: SEND training at v.17 14400 bit/s Sep 16 16:34:43.65: [ 6697]: DELAY 70 ms Sep 16 16:34:43.72: [ 6697]: <-- [9:AT+FTH=3\r] Sep 16 16:34:43.89: [ 6697]: --> [7:CONNECT] Sep 16 16:34:43.89: [ 6697]: <-- data [23] Sep 16 16:34:43.89: [ 6697]: <-- data [2] Sep 16 16:34:45.63: [ 6697]: --> [7:CONNECT] Sep 16 16:34:45.63: [ 6697]: <-- data [7] Sep 16 16:34:45.63: [ 6697]: <-- data [2] Sep 16 16:34:46.36: [ 6697]: --> [2:OK] Sep 16 16:34:46.36: [ 6697]: <-- [9:AT+FTS=7\r] Sep 16 16:34:46.52: [ 6697]: --> [2:OK] Sep 16 16:34:46.52: [ 6697]: <-- [11:AT+FTM=145\r] Sep 16 16:34:48.25: [ 6697]: --> [7:CONNECT] Sep 16 16:34:48.25: [ 6697]: <-- data [1024] Sep 16 16:34:48.25: [ 6697]: <-- data [1024] Sep 16 16:34:48.25: [ 6697]: <-- data [652] Sep 16 16:34:48.25: [ 6697]: <-- data [2] Sep 16 16:34:54.02: [ 6697]: --> [2:OK] Sep 16 16:34:54.02: [ 6697]: <-- [9:AT+FRS=1\r] Sep 16 16:34:54.12: [ 6697]: --> [2:OK] Sep 16 16:34:54.12: [ 6697]: <-- [9:AT+FRH=3\r] Sep 16 16:34:57.22: [ 6697]: --> [0:] Sep 16 16:34:57.22: [ 6697]: MODEM <Empty line> Sep 16 16:34:57.22: [ 6697]: <-- data [1] Sep 16 16:34:57.25: [ 6697]: --> [2:OK] Sep 16 16:34:57.25: [ 6697]: DELAY 70 ms Sep 16 16:34:57.32: [ 6697]: SEND training at v.17 12000 bit/s Sep 16 16:34:57.32: [ 6697]: <-- [9:AT+FTH=3\r] Sep 16 16:34:57.49: [ 6697]: --> [7:CONNECT] Sep 16 16:34:57.49: [ 6697]: <-- data [23] Sep 16 16:34:57.49: [ 6697]: <-- data [2] Sep 16 16:34:59.23: [ 6697]: --> [7:CONNECT] Sep 16 16:34:59.23: [ 6697]: <-- data [7] Sep 16 16:34:59.23: [ 6697]: <-- data [2] Sep 16 16:34:59.95: [ 6697]: --> [2:OK] Sep 16 16:34:59.95: [ 6697]: <-- [9:AT+FTS=7\r] Sep 16 16:35:00.11: [ 6697]: --> [2:OK] Sep 16 16:35:00.11: [ 6697]: <-- [11:AT+FTM=121\r] Sep 16 16:35:01.84: [ 6697]: --> [7:CONNECT] Sep 16 16:35:01.84: [ 6697]: <-- data [1024] Sep 16 16:35:01.84: [ 6697]: <-- data [1024] Sep 16 16:35:01.84: [ 6697]: <-- data [202] Sep 16 16:35:01.84: [ 6697]: <-- data [2] Sep 16 16:35:06.66: [ 6697]: --> [2:OK] Sep 16 16:35:06.66: [ 6697]: <-- [9:AT+FRS=1\r] Sep 16 16:35:06.76: [ 6697]: --> [2:OK] Sep 16 16:35:06.76: [ 6697]: <-- [9:AT+FRH=3\r] Sep 16 16:35:09.86: [ 6697]: --> [0:] Sep 16 16:35:09.86: [ 6697]: MODEM <Empty line> Sep 16 16:35:09.86: [ 6697]: <-- data [1] Sep 16 16:35:09.90: [ 6697]: --> [2:OK] Sep 16 16:35:09.90: [ 6697]: DELAY 70 ms Sep 16 16:35:09.97: [ 6697]: MODEM: unsupported baud rate 0x3 Sep 16 16:35:09.97: [ 6697]: MODEM: unsupported baud rate 0x2 Sep 16 16:35:09.97: [ 6697]: SEND training at v.27ter 4800 bit/s Sep 16 16:35:09.97: [ 6697]: <-- [9:AT+FTH=3\r] Sep 16 16:35:10.14: [ 6697]: --> [7:CONNECT] Sep 16 16:35:10.14: [ 6697]: <-- data [23] Sep 16 16:35:10.14: [ 6697]: <-- data [2] Sep 16 16:35:11.88: [ 6697]: --> [7:CONNECT] Sep 16 16:35:11.88: [ 6697]: <-- data [7] Sep 16 16:35:11.88: [ 6697]: <-- data [2] Sep 16 16:35:12.59: [ 6697]: --> [2:OK] Sep 16 16:35:12.59: [ 6697]: <-- [9:AT+FTS=7\r] Sep 16 16:35:12.76: [ 6697]: --> [2:OK] Sep 16 16:35:12.76: [ 6697]: <-- [10:AT+FTM=48\r] Sep 16 16:35:13.79: [ 6697]: --> [7:CONNECT] Sep 16 16:35:13.79: [ 6697]: <-- data [900] Sep 16 16:35:13.79: [ 6697]: <-- data [2] Sep 16 16:35:15.75: [ 6697]: --> [2:OK] Sep 16 16:35:15.75: [ 6697]: <-- [9:AT+FRS=1\r] Sep 16 16:35:15.86: [ 6697]: --> [2:OK] Sep 16 16:35:15.86: [ 6697]: <-- [9:AT+FRH=3\r] Sep 16 16:35:17.25: [ 6697]: --> [7:CONNECT] Sep 16 16:35:17.38: [ 6697]: --> [2:OK] Sep 16 16:35:17.38: [ 6697]: SEND training at v.27ter fallback mode 2400 bit/s Sep 16 16:35:17.38: [ 6697]: DELAY 70 ms Sep 16 16:35:17.45: [ 6697]: <-- [9:AT+FTH=3\r] Sep 16 16:35:17.62: [ 6697]: --> [7:CONNECT] Sep 16 16:35:17.62: [ 6697]: <-- data [23] Sep 16 16:35:17.62: [ 6697]: <-- data [2] Sep 16 16:35:19.36: [ 6697]: --> [7:CONNECT] Sep 16 16:35:19.36: [ 6697]: <-- data [7] Sep 16 16:35:19.36: [ 6697]: <-- data [2] Sep 16 16:35:20.07: [ 6697]: --> [2:OK] Sep 16 16:35:20.07: [ 6697]: <-- [9:AT+FTS=7\r] Sep 16 16:35:20.24: [ 6697]: --> [2:OK] Sep 16 16:35:20.24: [ 6697]: <-- [10:AT+FTM=24\r] Sep 16 16:35:21.51: [ 6697]: --> [7:CONNECT] Sep 16 16:35:21.51: [ 6697]: <-- data [450] Sep 16 16:35:21.51: [ 6697]: <-- data [2] Sep 16 16:35:23.14: [ 6697]: --> [2:OK] Sep 16 16:35:23.14: [ 6697]: <-- [9:AT+FRS=1\r] Sep 16 16:35:23.25: [ 6697]: --> [2:OK] Sep 16 16:35:23.25: [ 6697]: <-- [9:AT+FRH=3\r] Sep 16 16:35:24.60: [ 6697]: --> [7:CONNECT] Sep 16 16:35:24.72: [ 6697]: --> [2:OK] Sep 16 16:35:24.72: [ 6697]: TRAINING succeeded Sep 16 16:35:24.72: [ 6697]: SEND begin page Sep 16 16:35:24.72: [ 6697]: Reading MH-compressed image file Sep 16 16:35:24.73: [ 6697]: SEND send frame number 0 Sep 16 16:35:24.73: [ 6697]: SEND send frame number 1 Sep 16 16:35:24.73: [ 6697]: SEND send frame number 2 Sep 16 16:35:24.73: [ 6697]: SEND send frame number 3 Sep 16 16:35:24.73: [ 6697]: SEND send frame number 4 Sep 16 16:35:24.73: [ 6697]: SEND send frame number 5 Sep 16 16:35:24.73: [ 6697]: SEND send frame number 6 Sep 16 16:35:24.73: [ 6697]: SEND send frame number 7 Sep 16 16:35:24.73: [ 6697]: SEND send frame number 8 Sep 16 16:35:24.73: [ 6697]: SEND send frame number 9 Sep 16 16:35:24.73: [ 6697]: SEND send frame number 10 Sep 16 16:35:24.73: [ 6697]: SEND send frame number 11 Sep 16 16:35:24.73: [ 6697]: SEND send frame number 12 Sep 16 16:35:24.73: [ 6697]: SEND send frame number 13 Sep 16 16:35:24.73: [ 6697]: SEND send frame number 14 Sep 16 16:35:24.73: [ 6697]: SEND send frame number 15 Sep 16 16:35:24.73: [ 6697]: SEND send frame number 16 Sep 16 16:35:24.73: [ 6697]: SEND send frame number 17 Sep 16 16:35:24.73: [ 6697]: SEND send frame number 18 Sep 16 16:35:24.73: [ 6697]: SEND send frame number 19 Sep 16 16:35:24.73: [ 6697]: SEND send frame number 20 Sep 16 16:35:24.73: [ 6697]: SEND send frame number 21 Sep 16 16:35:24.73: [ 6697]: SEND send frame number 22 Sep 16 16:35:24.73: [ 6697]: SEND send frame number 23 Sep 16 16:35:24.73: [ 6697]: SEND send frame number 24 Sep 16 16:35:24.73: [ 6697]: SEND send frame number 25 Sep 16 16:35:24.73: [ 6697]: SEND send frame number 26 Sep 16 16:35:24.73: [ 6697]: SEND send frame number 27 Sep 16 16:35:24.73: [ 6697]: SEND send frame number 28 Sep 16 16:35:24.73: [ 6697]: SEND send frame number 29 Sep 16 16:35:24.73: [ 6697]: SEND send frame number 30 Sep 16 16:35:24.73: [ 6697]: SEND send frame number 31 Sep 16 16:35:24.73: [ 6697]: SEND send frame number 32 Sep 16 16:35:24.73: [ 6697]: SEND send frame number 33 Sep 16 16:35:24.73: [ 6697]: SEND send frame number 34 Sep 16 16:35:24.73: [ 6697]: SEND send frame number 35 Sep 16 16:35:24.73: [ 6697]: SEND send frame number 36 Sep 16 16:35:24.73: [ 6697]: SEND send frame number 37 Sep 16 16:35:24.73: [ 6697]: SEND send frame number 38 Sep 16 16:35:24.73: [ 6697]: SEND send frame number 39 Sep 16 16:35:24.73: [ 6697]: SEND send frame number 40 Sep 16 16:35:24.73: [ 6697]: SEND send frame number 41 Sep 16 16:35:24.73: [ 6697]: SEND send frame number 42 Sep 16 16:35:24.73: [ 6697]: SEND send frame number 43 Sep 16 16:35:24.73: [ 6697]: SEND send frame number 44 Sep 16 16:35:24.73: [ 6697]: SEND send frame number 45 Sep 16 16:35:24.73: [ 6697]: SEND send frame number 46 Sep 16 16:35:24.73: [ 6697]: SEND send frame number 47 Sep 16 16:35:24.73: [ 6697]: SEND send frame number 48 Sep 16 16:35:24.73: [ 6697]: SEND send frame number 49 Sep 16 16:35:24.73: [ 6697]: SEND send frame number 50 Sep 16 16:35:24.73: [ 6697]: SEND send frame number 51 Sep 16 16:35:24.73: [ 6697]: SEND send frame number 52 Sep 16 16:35:24.73: [ 6697]: DELAY 70 ms Sep 16 16:35:24.80: [ 6697]: <-- [10:AT+FTM=24\r] Sep 16 16:35:26.07: [ 6697]: --> [7:CONNECT] Sep 16 16:35:26.07: [ 6697]: <-- data [1038] Sep 16 16:35:26.07: [ 6697]: <-- data [1065] Sep 16 16:35:26.07: [ 6697]: <-- data [1043] Sep 16 16:35:26.07: [ 6697]: <-- data [1062] Sep 16 16:35:36.92: [ 6697]: <-- data [1041] Sep 16 16:35:36.92: [ 6697]: <-- data [1042] Sep 16 16:35:36.92: [ 6697]: <-- data [1044] Sep 16 16:35:36.92: [ 6697]: <-- data [1040] Sep 16 16:35:46.27: [ 6697]: <-- data [1039] Sep 16 16:35:46.27: [ 6697]: <-- data [1046] Sep 16 16:35:46.27: [ 6697]: <-- data [1042] Sep 16 16:35:55.54: [ 6697]: <-- data [1039] Sep 16 16:35:55.54: [ 6697]: <-- data [1037] Sep 16 16:36:04.83: [ 6697]: <-- data [989] Sep 16 16:36:04.83: [ 6697]: <-- data [2]
- Follow-Ups:
- Re: [hylafax-users] Communication problems
- From: Daniel L. Miller
- Re: [hylafax-users] Communication problems
- Prev by Date: Re: [hylafax-users] Modem stop responding
- Next by Date: Re: [hylafax-users] Communication problems
- Previous by thread: Re: [hylafax-users] faxaddmodem acm driver
- Next by thread: Re: [hylafax-users] Communication problems
- Index(es):
Project hosted by iFAX Solutions