 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
[hylafax-users] Send empty pages
- To: hylafax-users@xxxxxxxxxxx
- Subject: [hylafax-users] Send empty pages
- From: Massimo Brena <massimo.brena12@xxxxxxxxxxx>
- Reply-to: massimo.brena12@xxxxxxxxxxx
- Date: Tue, 14 Sep 2010 17:48:25 +0200
Hi, I've a big problem with hylafax server because it sends header only. Using a client to forword a fax (tried with pdf and ps format) the receiving machine print empty pages (headers only exactly). I don't understand what's the matter. Here attache the log. Sep 14 16:16:57.61: [20518]: SESSION BEGIN 000000001 3935771251 Sep 14 16:16:57.61: [20518]: HylaFAX (tm) Version 6.0.3 Sep 14 16:16:57.61: [20518]: SEND FAX: JOB 1 DEST 035771251 COMMID 000000001 DEVICE '/dev/ttyS0' FROM 'network <network@xxxxxxxxxxxx>' USER network Sep 14 16:16:57.61: [20518]: <-- [12:AT+FCLASS=1\r] Sep 14 16:16:57.75: [20518]: --> [2:OK] Sep 14 16:16:57.75: [20518]: DIAL 035771251 Sep 14 16:16:57.75: [20518]: <-- [14:ATDT035771251\r] Sep 14 16:17:16.98: [20518]: --> [7:CONNECT] Sep 14 16:17:18.28: [20518]: --> [2:OK] Sep 14 16:17:18.28: [20518]: REMOTE NSF "00 00 56 55 55 00 8C 90 80 C5 1D" Sep 14 16:17:18.28: [20518]: NSF remote fax equipment: Brother MFC-3100C/MFC-8600 Sep 14 16:17:18.28: [20518]: <-- [9:AT+FRH=3\r] Sep 14 16:17:18.29: [20518]: --> [7:CONNECT] Sep 14 16:17:18.73: [20518]: --> [2:OK] Sep 14 16:17:18.73: [20518]: REMOTE best rate 33600 bit/s Sep 14 16:17:18.73: [20518]: REMOTE max A4 page width (215 mm) Sep 14 16:17:18.73: [20518]: REMOTE max unlimited page length Sep 14 16:17:18.73: [20518]: REMOTE best vres 15.4 line/mm Sep 14 16:17:18.73: [20518]: REMOTE format support: MH, MR, MMR, JBIG Sep 14 16:17:18.73: [20518]: REMOTE supports T.30 Annex A, 256-byte ECM Sep 14 16:17:18.73: [20518]: REMOTE best 10 ms/scanline Sep 14 16:17:18.73: [20518]: USE 14400 bit/s Sep 14 16:17:18.73: [20518]: USE error correction mode Sep 14 16:17:18.73: [20518]: SEND file "docq/doc1.pdf;c1" Sep 14 16:17:18.73: [20518]: USE A4 page width (215 mm) Sep 14 16:17:18.73: [20518]: USE unlimited page length Sep 14 16:17:18.73: [20518]: USE 7.7 line/mm Sep 14 16:17:18.73: [20518]: USE 2-D MMR Sep 14 16:17:18.73: [20518]: USE 0 ms/scanline Sep 14 16:17:18.73: [20518]: SEND training at v.17 14400 bit/s Sep 14 16:17:18.73: [20518]: DELAY 70 ms Sep 14 16:17:18.80: [20518]: <-- [9:AT+FTH=3\r] Sep 14 16:17:19.00: [20518]: --> [7:CONNECT] Sep 14 16:17:19.00: [20518]: <-- data [23] Sep 14 16:17:19.00: [20518]: <-- data [2] Sep 14 16:17:19.02: [20518]: --> [7:CONNECT] Sep 14 16:17:19.03: [20518]: <-- data [7] Sep 14 16:17:19.03: [20518]: <-- data [2] Sep 14 16:17:21.00: [20518]: --> [2:OK] Sep 14 16:17:21.00: [20518]: <-- [9:AT+FTS=7\r] Sep 14 16:17:21.08: [20518]: --> [2:OK] Sep 14 16:17:21.08: [20518]: <-- [11:AT+FTM=145\r] Sep 14 16:17:22.56: [20518]: --> [7:CONNECT] Sep 14 16:17:22.56: [20518]: <-- data [1024] Sep 14 16:17:22.56: [20518]: <-- data [1024] Sep 14 16:17:22.56: [20518]: <-- data [652] Sep 14 16:17:22.56: [20518]: <-- data [2] Sep 14 16:17:24.09: [20518]: --> [2:OK] Sep 14 16:17:24.09: [20518]: <-- [9:AT+FRS=1\r] Sep 14 16:17:24.11: [20518]: --> [2:OK] Sep 14 16:17:24.11: [20518]: <-- [9:AT+FRH=3\r] Sep 14 16:17:24.98: [20518]: --> [7:CONNECT] Sep 14 16:17:25.94: [20518]: --> [2:OK] Sep 14 16:17:25.95: [20518]: TRAINING succeeded Sep 14 16:17:25.95: [20518]: SEND begin page Sep 14 16:17:25.95: [20518]: SEND send frame number 0 Sep 14 16:17:25.95: [20518]: SEND send frame number 1 Sep 14 16:17:25.95: [20518]: SEND send frame number 2 Sep 14 16:17:25.95: [20518]: DELAY 70 ms Sep 14 16:17:26.02: [20518]: <-- [11:AT+FTM=146\r] Sep 14 16:17:26.28: [20518]: --> [7:CONNECT] Sep 14 16:17:26.28: [20518]: <-- data [1026] Sep 14 16:17:26.28: [20518]: <-- data [173] Sep 14 16:17:26.28: [20518]: <-- data [2] Sep 14 16:17:26.97: [20518]: --> [2:OK] Sep 14 16:17:26.97: [20518]: <-- [9:AT+FTS=9\r] Sep 14 16:17:27.07: [20518]: --> [2:OK] Sep 14 16:17:27.07: [20518]: <-- [9:AT+FTH=3\r] Sep 14 16:17:27.23: [20518]: --> [7:CONNECT] Sep 14 16:17:27.23: [20518]: <-- data [7] Sep 14 16:17:27.23: [20518]: <-- data [2] Sep 14 16:17:28.51: [20518]: --> [2:OK] Sep 14 16:17:28.51: [20518]: SEND send PPS (partial page signal) Sep 14 16:17:28.51: [20518]: SEND send EOP (no more pages or documents) Sep 14 16:17:28.51: [20518]: <-- [9:AT+FRH=3\r] Sep 14 16:17:29.42: [20518]: --> [7:CONNECT] Sep 14 16:17:30.17: [20518]: --> [2:OK] Sep 14 16:17:30.17: [20518]: SEND recv MCF (message confirmation) Sep 14 16:17:30.17: [20518]: DELAY 70 ms Sep 14 16:17:30.24: [20518]: SEND end page Sep 14 16:17:30.24: [20518]: SEND FAX (000000001): FROM network@xxxxxxxxxxxx TO 035771251 (page 1 of 1 sent in 0:00:12) Sep 14 16:17:30.24: [20518]: SEND FAX (000000001): FROM network@xxxxxxxxxxxx TO 035771251 (docq/doc1.pdf;c1 sent in 0:00:12) Sep 14 16:17:30.24: [20518]: <-- [9:AT+FTH=3\r] Sep 14 16:17:30.44: [20518]: --> [7:CONNECT] Sep 14 16:17:30.44: [20518]: <-- data [3] Sep 14 16:17:30.44: [20518]: <-- data [2] Sep 14 16:17:31.62: [20518]: --> [2:OK] Sep 14 16:17:32.62: [20518]: <-- [5:ATH0\r] Sep 14 16:17:32.85: [20518]: --> [2:OK] Sep 14 16:17:32.85: [20518]: SESSION END ############################################################################# Sep 14 16:51:19.91: [ 2753]: SESSION BEGIN 000000003 3935771251 Sep 14 16:51:19.91: [ 2753]: HylaFAX (tm) Version 6.0.3 Sep 14 16:51:19.91: [ 2753]: SEND FAX: JOB 3 DEST 035771251 COMMID 000000003 DEVICE '/dev/ttyS0' FROM 'network <network@xxxxxxxxxxxx>' USER network Sep 14 16:51:19.91: [ 2753]: <-- [12:AT+FCLASS=1\r] Sep 14 16:51:20.05: [ 2753]: --> [2:OK] Sep 14 16:51:20.05: [ 2753]: DIAL 035771251 Sep 14 16:51:20.05: [ 2753]: <-- [14:ATDT035771251\r] Sep 14 16:51:39.51: [ 2753]: --> [7:CONNECT] Sep 14 16:51:40.65: [ 2753]: --> [2:OK] Sep 14 16:51:40.65: [ 2753]: REMOTE NSF "00 00 56 55 55 00 8C 90 80 C5 1D" Sep 14 16:51:40.65: [ 2753]: NSF remote fax equipment: Brother MFC-3100C/MFC-8600 Sep 14 16:51:40.65: [ 2753]: <-- [9:AT+FRH=3\r] Sep 14 16:51:40.67: [ 2753]: --> [7:CONNECT] Sep 14 16:51:41.08: [ 2753]: --> [2:OK] Sep 14 16:51:41.08: [ 2753]: REMOTE best rate 33600 bit/s Sep 14 16:51:41.08: [ 2753]: REMOTE max A4 page width (215 mm) Sep 14 16:51:41.08: [ 2753]: REMOTE max unlimited page length Sep 14 16:51:41.08: [ 2753]: REMOTE best vres 15.4 line/mm Sep 14 16:51:41.08: [ 2753]: REMOTE format support: MH, MR, MMR, JBIG Sep 14 16:51:41.08: [ 2753]: REMOTE supports T.30 Annex A, 256-byte ECM Sep 14 16:51:41.08: [ 2753]: REMOTE best 10 ms/scanline Sep 14 16:51:41.08: [ 2753]: USE 14400 bit/s Sep 14 16:51:41.08: [ 2753]: USE error correction mode Sep 14 16:51:41.08: [ 2753]: SEND file "docq/doc3.pdf;c1" Sep 14 16:51:41.08: [ 2753]: USE A4 page width (215 mm) Sep 14 16:51:41.08: [ 2753]: USE unlimited page length Sep 14 16:51:41.08: [ 2753]: USE 7.7 line/mm Sep 14 16:51:41.08: [ 2753]: USE 2-D MMR Sep 14 16:51:41.08: [ 2753]: USE 0 ms/scanline Sep 14 16:51:41.08: [ 2753]: SEND training at v.17 14400 bit/s Sep 14 16:51:41.08: [ 2753]: DELAY 70 ms Sep 14 16:51:41.15: [ 2753]: <-- [9:AT+FTH=3\r] Sep 14 16:51:41.35: [ 2753]: --> [7:CONNECT] Sep 14 16:51:41.35: [ 2753]: <-- data [23] Sep 14 16:51:41.35: [ 2753]: <-- data [2] Sep 14 16:51:41.37: [ 2753]: --> [7:CONNECT] Sep 14 16:51:41.37: [ 2753]: <-- data [7] Sep 14 16:51:41.37: [ 2753]: <-- data [2] Sep 14 16:51:43.35: [ 2753]: --> [2:OK] Sep 14 16:51:43.35: [ 2753]: <-- [9:AT+FTS=7\r] Sep 14 16:51:43.43: [ 2753]: --> [2:OK] Sep 14 16:51:43.43: [ 2753]: <-- [11:AT+FTM=145\r] Sep 14 16:51:44.91: [ 2753]: --> [7:CONNECT] Sep 14 16:51:44.91: [ 2753]: <-- data [1024] Sep 14 16:51:44.91: [ 2753]: <-- data [1024] Sep 14 16:51:44.91: [ 2753]: <-- data [652] Sep 14 16:51:44.91: [ 2753]: <-- data [2] Sep 14 16:51:46.44: [ 2753]: --> [2:OK] Sep 14 16:51:46.44: [ 2753]: <-- [9:AT+FRS=1\r] Sep 14 16:51:46.47: [ 2753]: --> [2:OK] Sep 14 16:51:46.47: [ 2753]: <-- [9:AT+FRH=3\r] Sep 14 16:51:47.51: [ 2753]: --> [7:CONNECT] Sep 14 16:51:48.24: [ 2753]: --> [2:OK] Sep 14 16:51:48.24: [ 2753]: TRAINING succeeded Sep 14 16:51:48.24: [ 2753]: SEND begin page Sep 14 16:51:48.24: [ 2753]: SEND send frame number 0 Sep 14 16:51:48.24: [ 2753]: SEND send frame number 1 Sep 14 16:51:48.24: [ 2753]: SEND send frame number 2 Sep 14 16:51:48.24: [ 2753]: DELAY 70 ms Sep 14 16:51:48.31: [ 2753]: <-- [11:AT+FTM=146\r] Sep 14 16:51:48.57: [ 2753]: --> [7:CONNECT] Sep 14 16:51:48.57: [ 2753]: <-- data [1029] Sep 14 16:51:48.57: [ 2753]: <-- data [172] Sep 14 16:51:48.57: [ 2753]: <-- data [2] Sep 14 16:51:49.27: [ 2753]: --> [2:OK] Sep 14 16:51:49.27: [ 2753]: <-- [9:AT+FTS=9\r] Sep 14 16:51:49.37: [ 2753]: --> [2:OK] Sep 14 16:51:49.37: [ 2753]: <-- [9:AT+FTH=3\r] Sep 14 16:51:49.53: [ 2753]: --> [7:CONNECT] Sep 14 16:51:49.53: [ 2753]: <-- data [7] Sep 14 16:51:49.53: [ 2753]: <-- data [2] Sep 14 16:51:50.81: [ 2753]: --> [2:OK] Sep 14 16:51:50.81: [ 2753]: SEND send PPS (partial page signal) Sep 14 16:51:50.81: [ 2753]: SEND send EOP (no more pages or documents) Sep 14 16:51:50.81: [ 2753]: <-- [9:AT+FRH=3\r] Sep 14 16:51:51.51: [ 2753]: --> [7:CONNECT] Sep 14 16:51:52.49: [ 2753]: --> [2:OK] Sep 14 16:51:52.49: [ 2753]: SEND recv MCF (message confirmation) Sep 14 16:51:52.49: [ 2753]: DELAY 70 ms Sep 14 16:51:52.56: [ 2753]: SEND end page Sep 14 16:51:52.56: [ 2753]: SEND FAX (000000003): FROM network@xxxxxxxxxxxx TO 035771251 (page 1 of 1 sent in 0:00:11) Sep 14 16:51:52.56: [ 2753]: SEND FAX (000000003): FROM network@xxxxxxxxxxxx TO 035771251 (docq/doc3.pdf;c1 sent in 0:00:11) Sep 14 16:51:52.56: [ 2753]: <-- [9:AT+FTH=3\r] Sep 14 16:51:52.76: [ 2753]: --> [7:CONNECT] Sep 14 16:51:52.76: [ 2753]: <-- data [3] Sep 14 16:51:52.76: [ 2753]: <-- data [2] Sep 14 16:51:53.94: [ 2753]: --> [2:OK] Sep 14 16:51:54.94: [ 2753]: <-- [5:ATH0\r] Sep 14 16:51:55.17: [ 2753]: --> [2:OK] Sep 14 16:51:55.17: [ 2753]: SESSION END ################################################################################ Sep 14 17:26:12.37: [ 4131]: SESSION BEGIN 000000004 3935771251 Sep 14 17:26:12.37: [ 4131]: HylaFAX (tm) Version 6.0.3 Sep 14 17:26:12.37: [ 4131]: SEND FAX: JOB 5 DEST 035771251 COMMID 000000004 DEVICE '/dev/ttyS0' FROM 'it-com <network@localhost>' USER network Sep 14 17:26:12.37: [ 4131]: <-- [12:AT+FCLASS=1\r] Sep 14 17:26:12.51: [ 4131]: --> [2:OK] Sep 14 17:26:12.51: [ 4131]: DIAL 035771251 Sep 14 17:26:12.51: [ 4131]: <-- [14:ATDT035771251\r] Sep 14 17:26:31.56: [ 4131]: --> [7:CONNECT] Sep 14 17:26:32.76: [ 4131]: --> [2:OK] Sep 14 17:26:32.77: [ 4131]: REMOTE NSF "00 00 56 55 55 00 8C 90 80 C5 1D" Sep 14 17:26:32.77: [ 4131]: NSF remote fax equipment: Brother MFC-3100C/MFC-8600 Sep 14 17:26:32.77: [ 4131]: <-- [9:AT+FRH=3\r] Sep 14 17:26:32.78: [ 4131]: --> [7:CONNECT] Sep 14 17:26:33.19: [ 4131]: --> [2:OK] Sep 14 17:26:33.19: [ 4131]: REMOTE best rate 33600 bit/s Sep 14 17:26:33.19: [ 4131]: REMOTE max A4 page width (215 mm) Sep 14 17:26:33.19: [ 4131]: REMOTE max unlimited page length Sep 14 17:26:33.19: [ 4131]: REMOTE best vres 15.4 line/mm Sep 14 17:26:33.19: [ 4131]: REMOTE format support: MH, MR, MMR, JBIG Sep 14 17:26:33.19: [ 4131]: REMOTE supports T.30 Annex A, 256-byte ECM Sep 14 17:26:33.19: [ 4131]: REMOTE best 10 ms/scanline Sep 14 17:26:33.19: [ 4131]: USE 14400 bit/s Sep 14 17:26:33.19: [ 4131]: USE error correction mode Sep 14 17:26:33.19: [ 4131]: SEND file "docq/doc5.ps;f1" Sep 14 17:26:33.19: [ 4131]: USE A4 page width (215 mm) Sep 14 17:26:33.19: [ 4131]: USE unlimited page length Sep 14 17:26:33.19: [ 4131]: USE 7.7 line/mm Sep 14 17:26:33.19: [ 4131]: USE 2-D MMR Sep 14 17:26:33.19: [ 4131]: USE 0 ms/scanline Sep 14 17:26:33.19: [ 4131]: SEND training at v.17 14400 bit/s Sep 14 17:26:33.19: [ 4131]: DELAY 70 ms Sep 14 17:26:33.26: [ 4131]: <-- [9:AT+FTH=3\r] Sep 14 17:26:33.46: [ 4131]: --> [7:CONNECT] Sep 14 17:26:33.46: [ 4131]: <-- data [23] Sep 14 17:26:33.46: [ 4131]: <-- data [2] Sep 14 17:26:33.49: [ 4131]: --> [7:CONNECT] Sep 14 17:26:33.49: [ 4131]: <-- data [7] Sep 14 17:26:33.49: [ 4131]: <-- data [2] Sep 14 17:26:35.46: [ 4131]: --> [2:OK] Sep 14 17:26:35.46: [ 4131]: <-- [9:AT+FTS=7\r] Sep 14 17:26:35.54: [ 4131]: --> [2:OK] Sep 14 17:26:35.54: [ 4131]: <-- [11:AT+FTM=145\r] Sep 14 17:26:37.02: [ 4131]: --> [7:CONNECT] Sep 14 17:26:37.02: [ 4131]: <-- data [1024] Sep 14 17:26:37.02: [ 4131]: <-- data [1024] Sep 14 17:26:37.02: [ 4131]: <-- data [652] Sep 14 17:26:37.02: [ 4131]: <-- data [2] Sep 14 17:26:38.55: [ 4131]: --> [2:OK] Sep 14 17:26:38.55: [ 4131]: <-- [9:AT+FRS=1\r] Sep 14 17:26:38.57: [ 4131]: --> [2:OK] Sep 14 17:26:38.57: [ 4131]: <-- [9:AT+FRH=3\r] Sep 14 17:26:39.20: [ 4131]: --> [7:CONNECT] Sep 14 17:26:40.31: [ 4131]: --> [2:OK] Sep 14 17:26:40.31: [ 4131]: TRAINING succeeded Sep 14 17:26:40.31: [ 4131]: SEND begin page Sep 14 17:26:40.31: [ 4131]: SEND send frame number 0 Sep 14 17:26:40.31: [ 4131]: SEND send frame number 1 Sep 14 17:26:40.31: [ 4131]: SEND send frame number 2 Sep 14 17:26:40.31: [ 4131]: DELAY 70 ms Sep 14 17:26:40.38: [ 4131]: <-- [11:AT+FTM=146\r] Sep 14 17:26:40.64: [ 4131]: --> [7:CONNECT] Sep 14 17:26:40.64: [ 4131]: <-- data [1026] Sep 14 17:26:40.64: [ 4131]: <-- data [173] Sep 14 17:26:40.64: [ 4131]: <-- data [2] Sep 14 17:26:41.33: [ 4131]: --> [2:OK] Sep 14 17:26:41.33: [ 4131]: <-- [9:AT+FTS=9\r] Sep 14 17:26:41.44: [ 4131]: --> [2:OK] Sep 14 17:26:41.44: [ 4131]: <-- [9:AT+FTH=3\r] Sep 14 17:26:41.59: [ 4131]: --> [7:CONNECT] Sep 14 17:26:41.59: [ 4131]: <-- data [7] Sep 14 17:26:41.59: [ 4131]: <-- data [2] Sep 14 17:26:42.88: [ 4131]: --> [2:OK] Sep 14 17:26:42.88: [ 4131]: SEND send PPS (partial page signal) Sep 14 17:26:42.88: [ 4131]: SEND send EOP (no more pages or documents) Sep 14 17:26:42.88: [ 4131]: <-- [9:AT+FRH=3\r] Sep 14 17:26:43.56: [ 4131]: --> [7:CONNECT] Sep 14 17:26:44.44: [ 4131]: --> [2:OK] Sep 14 17:26:44.44: [ 4131]: SEND recv MCF (message confirmation) Sep 14 17:26:44.44: [ 4131]: DELAY 70 ms Sep 14 17:26:44.51: [ 4131]: SEND end page Sep 14 17:26:44.51: [ 4131]: SEND FAX (000000004): FROM network@localhost TO 035771251 (page 1 of 1 sent in 0:00:11) Sep 14 17:26:44.51: [ 4131]: SEND FAX (000000004): FROM network@localhost TO 035771251 (docq/doc5.ps;f1 sent in 0:00:11) Sep 14 17:26:44.51: [ 4131]: <-- [9:AT+FTH=3\r] Sep 14 17:26:44.70: [ 4131]: --> [7:CONNECT] Sep 14 17:26:44.71: [ 4131]: <-- data [3] Sep 14 17:26:44.71: [ 4131]: <-- data [2] Sep 14 17:26:45.88: [ 4131]: --> [2:OK] Sep 14 17:26:46.89: [ 4131]: <-- [5:ATH0\r] Sep 14 17:26:47.12: [ 4131]: --> [2:OK] Sep 14 17:26:47.12: [ 4131]: SESSION END Does anyone has some ideas or better solution????? Thanks ____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
- Follow-Ups:
- Re: [hylafax-users] Send empty pages
- From: Lee Howard
- Re: [hylafax-users] Send empty pages
- Prev by Date: [hylafax-users] recieving faxes doesn't work on specific sender
- Next by Date: [hylafax-users] Killtime set to 2 hours
- Previous by thread: Re: [hylafax-users] recieving faxes doesn't work on specific sender
- Next by thread: Re: [hylafax-users] Send empty pages
- Index(es):
Project hosted by iFAX Solutions