Re: [hylafax-users] REJECT: Too many attempts

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

Eliran,

The error message "REJECT: Too many attempts to transmit" only ever 
occurs when the number of tries (which is an outbound call that 
handshakes with fax, but does not complete the job for some reason) 
exceeds the smaller of the MaxTries value in the sendq file or an 
analogous setting in a JobControl configuration.

Given that your sendq file has "maxtries:6" in it, I must therefore 
conclude that if you really are getting "REJECT: Too many attempts to 
transmit" that you must have a JobControl configuration which is 
interfering with your interests.

If you are not getting "REJECT: Too many attempts to transmit" (as your 
initial report indicated) then what I have written is irrelevant.

Be aware that many people have been misled by the fact that consecutive 
"No carrier" results to a destination that has not been "called before" 
(in this case meaning handshaking succeeded), will ignore the 
"NoCarrierRetrys" or "JobRetryNoCarrier" setting and will be terminated 
after two or three "No carrier" attempts.  This is a hard-coded 
configuration that intends to prevent numerous fax calls going to 
mis-dialed voice lines.  In other words, 
NoCarrierRetrys/JobRetryNoCarrier only has an effect when the 
destination has been "called before".

Thanks,

Lee.


Eliran Itzhak wrote:
> The problem is my job gets REJECTED after 2-3 attempts, even when 
> faxstat -s show its going to try 6 times, and I have the usual 
> settings in my config.ttyX file. Thanks !
> My Command line is :
> sendfax -h POOL@xxxxxxxxx <mailto:POOL@xxxxxxxxx> -S FreeFax.co.il 
> <http://FreeFax.co.il> -k now + 48 hours -P 50 -F From FreeFax.co.il 
> <http://FreeFax.co.il>|%c|Page %%P of %%T -x 
> 25-5-2010-16-47-00-173132146217^13^ -T 6 -t 6 -D -n -f 
> elirani@xxxxxxxxx <mailto:elirani@xxxxxxxxx> -d 1800111111 
> /path/to/pdf.pdf
>
> My Q file has this in its content.
> tts:1274794908
> killtime:1274967648
> retrytime:0
> state:6
> npages:0
> skippages:0
> nocountcover:0
> serverdocover:0
> ignoremodembusy:0
> totpages:1
> ntries:0
> ndials:0
> totdials:0
> maxdials:6
> tottries:0
> maxtries:6
> pagewidth:209
> resolution:196
> pagelength:296
> priority:50
> schedpri:50
> minbr:0
> desiredbr:13
> desiredst:0
> desiredec:2
> desireddf:3
> desiredtl:1
> useccover:1
> usexvres:0
> usecolor:0
> skippedpages:0
> canonical:1800111111
> external:1800111111
> number:1800111111
> mailaddr:elirani@xxxxxxxxx <mailto:mailaddr%3Aelirani@xxxxxxxxx>
> sender:elirani
> jobid:1073318
> jobtag:
> pagehandling:01c1Z0097P
> modem:HOT
> modemused:
> faxnumber:
> faxname:
> tsi:FreeFax.co.il <http://FreeFax.co.il>
> receiver:
> company:25-5-2010-16-41-39-173132146217^13^
> location:
> voice:
> fromcompany:
> fromlocation:
> fromvoice:
> regarding:
> comments:
> cover:
> client:localhost.localdomain
> owner:eliran
> groupid:1073318
> signalrate:
> dataformat:
> jobtype:facsimile
> tagline:From FreeFax.co.il <http://FreeFax.co.il>|%c|Page %%P of %%T
> subaddr:
> passwd:
> doneop:default
> commid:
> csi:
> nsf:
> timeofday:
> errorcode:
> status:
> returned:0
> notify:when done
> pagechop:default
> chopthreshold:3
> !pdf:0::docq/doc1073326.pdf.1073318
> fax:0::docq/doc1073326.pdf;1d81
>
>
> 2010/5/25 Lee Howard <faxguy@xxxxxxxxxxxxxxxx 
> <mailto:faxguy@xxxxxxxxxxxxxxxx>>
>
>     Eliran Itzhak wrote:
>
>         Thanks, But I already had these in my config.* files, But it
>         does not effect the REJECT msg.
>         This is what I currently have :
>         JobReqBusy: 30
>         JobReqNoAnswer: 60
>         JobReqNoCarrier: 30
>         JobReqNoFCon: 30
>         JobReqOther: 30
>         JobReqProto: 30
>
>         JobRetryBusy:6
>         JobRetryDataConn:6
>         JobRetryNoAnswer:6
>         JobRetryNoCarrier:6
>         JobRetryOther:6
>
>         MaxDials:6
>         MaxTries:6
>
>         It keeps "rejecting" some jobs after 3 attempts.
>
>
>     So how are you submitting the jobs?  And what does the sendq file
>     have in it?
>
>     Thanks,
>
>     Lee.


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*