Re: [hylafax-users] Faxes not being received

[Brian Zarb Adami <brianza@xxxxxxxxxxxxxxx>]

Well I have tried again. This time round setting the IAXmodem as a class1.0. Here is the result:

May 05 19:35:42.24: [ 4412]: SESSION BEGIN 000000051 +35621347947
May 05 19:35:42.24: [ 4412]: HylaFAX (tm) Version 5.4.2
May 05 19:35:42.24: [ 4412]: CallID: 'anonymous' 'anonymous' '<NONE>' 's'
May 05 19:35:42.24: [ 4412]: MODEM set XON/XOFF/FLUSH: input ignored, output disabled
May 05 19:35:42.24: [ 4412]: <-- [4:ATA\r]
May 05 19:35:45.96: [ 4412]: --> [7:CONNECT]
May 05 19:35:45.96: [ 4412]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyIAX'
May 05 19:35:45.96: [ 4412]: STATE CHANGE: ANSWERING -> RECEIVING
May 05 19:35:45.96: [ 4412]: RECV FAX: begin
May 05 19:35:45.96: [ 4412]: <-- HDLC<32:FF C0 04 B5 00 AA 12 9E 36 86 62 82 1A 04 14 2E B6 94 04 6A A6 4E CE 96 F6 76 04 AC 74 2C 74 4C>
May 05 19:35:45.96: [ 4412]: <-- data [32]
May 05 19:35:45.96: [ 4412]: <-- data [2]
May 05 19:35:46.88: [ 4412]: --> [7:CONNECT]
May 05 19:35:46.88: [ 4412]: <-- HDLC<23:FF C0 02 B6 A6 26 F6 B6 1A 82 92 04 04 04 04 04 04 04 04 04 04 04 04>
May 05 19:35:46.88: [ 4412]: <-- data [23]
May 05 19:35:46.88: [ 4412]: <-- data [2]
May 05 19:35:47.64: [ 4412]: --> [7:CONNECT]
May 05 19:35:47.64: [ 4412]: <-- HDLC<13:FF C8 01 00 77 5F 23 01 FB C1 01 01 18>
May 05 19:35:47.64: [ 4412]: <-- data [13]
May 05 19:35:47.64: [ 4412]: <-- data [2]
May 05 19:35:48.22: [ 4412]: --> [2:OK]
May 05 19:35:48.22: [ 4412]: <-- [9:AT+FRH=3\r]
May 05 19:35:48.58: [ 4412]: --> [7:CONNECT]
May 05 19:35:48.78: [ 4412]: --> [1:FE]
May 05 19:35:48.78: [ 4412]: --> HDLC<132:FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FE F3>
May 05 19:35:48.78: [ 4412]: --> [5:ERROR]
May 05 19:35:48.78: [ 4412]: MODEM Command error
May 05 19:35:48.78: [ 4412]: FCS error
May 05 19:35:48.78: [ 4412]: <-- [10:AT+FRS=21\r]
May 05 19:35:51.88: [ 4412]: --> [2:OK]
May 05 19:35:51.88: [ 4412]: <-- [9:AT+FTH=3\r]
May 05 19:35:51.90: [ 4412]: --> [7:CONNECT]
May 05 19:35:51.90: [ 4412]: <-- HDLC<3:FF C8 58>
May 05 19:35:51.90: [ 4412]: <-- data [3]
May 05 19:35:51.90: [ 4412]: <-- data [2]
May 05 19:35:52.98: [ 4412]: --> [2:OK]
May 05 19:35:52.98: [ 4412]: RECV send CRP (command repeat)
May 05 19:35:52.98: [ 4412]: <-- [9:AT+FRH=3\r]
May 05 19:35:59.98: [ 4412]: --> [0:]
May 05 19:35:59.98: [ 4412]: MODEM <Empty line>
May 05 19:35:59.98: [ 4412]: MODEM TIMEOUT: waiting for v.21 carrier
May 05 19:35:59.98: [ 4412]: <-- data [1]
May 05 19:35:59.98: [ 4412]: --> [2:OK]
May 05 19:35:59.98: [ 4412]: <-- [9:AT+FRS=7\r]
May 05 19:36:10.83: [ 4412]: --> [10:NO CARRIER]
May 05 19:36:10.83: [ 4412]: MODEM No carrier
May 05 19:36:10.83: [ 4412]: Failure to receive silence (synchronization failure). {E100}
May 05 19:36:10.83: [ 4412]: RECV FAX: Failure to receive silence (synchronization failure). {E100}
May 05 19:36:10.83: [ 4412]: RECV FAX: end
May 05 19:36:10.83: [ 4412]: Failure to receive silence (synchronization failure). {E100}
May 05 19:36:10.83: [ 4412]: SESSION END


________________________________________
From: Lee Howard [faxguy@xxxxxxxxxxxxxxxx]
Sent: 05 May 2010 14:38
To: Brian Zarb Adami
Cc: hylafax-users@xxxxxxxxxxx
Subject: Re: [hylafax-users] Faxes not being received

Brian Zarb Adami wrote:
> the problems were:
>
> -bash: ./configure: Permission denied
> make: *** No targets specified and no makefile found.  Stop.
> make: *** No rule to make target `install'.  Stop.

Well, you have to run configure successfully before running make.

As for why ./configure told you 'permission denied', I'm not sure.  What
does 'ls -l configure' say?

Thanks,

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*