Re: [hylafax-users] Distinctive Ring Configuration Help Needed

["Dennis M. Linton" <dennis@xxxxxxxxxxxx>]

Hi, Ramon;

    I modified /etc/hylafax/config.ttyS0 (my modem is on /dev/ttyS0) 
then did /etc/init.d/hylafax restart.

    I just noticed a small error in my last post...
    ModemResetCmds:    AT+VDR=1,2
    should have been...
    ModemResetCmds:    ATZ;AT+VDR=1,2

    Don't know if it makes a difference but my setup now works.

Best regards,
    Dennis

Ramon F. McDougall wrote:
> Good Evening,
>
> Which file or configuration did you modify?
>
>
> Kind Regards,
>
>
> R@m0ne
>
> -----Original Message-----
> From: hylafax-users-bounce@xxxxxxxxxxx
> [mailto:hylafax-users-bounce@xxxxxxxxxxx] On Behalf Of Dennis M. Linton
> Sent: Monday, November 17, 2008 10:10 PM
> To: hylafax-users@xxxxxxxxxxx
> Subject: Re: [hylafax-users] Distinctive Ring Configuration Help Needed
>
> Dennis M. Linton wrote:
> > Greetings!
> >
> > I have Hylafax server and client with AvantFax setup and working 
> > except that I cannot get distinctive ring working - Hylafax either 
> > answers everything or nothing.
> >
> > Ubuntu 8.04 (Linux 2.6.24-21-generic)
> > Hylafax 4.4.3 from Ubuntu 8.04 respositories
> > Modem: AOpen FM56-EXV (Connexant) serial voice, fax, data modem.  This 
> > is an external modem and works charmingly with Linux.
> >
> > Distinctive ring reporting for this modem is DRON= and DROF=, only 
> > (see minicom session below).   The max  value for  AT+VDR=1,6.  I know 
> > that Hylafax is setting AT+VDR=1,6 because if I change this setting 
> > through minicom, restart Hylafax and then go back and check with 
> > minicom, the modem has been returned to AT+VDR=1,6 (the config.ttyS0 
> > spec).
> >
> > If I comment out DRingOn and DRingOff, Hylafax answers all calls; 
> > otherwise it answers no calls.  DistinctiveRings, NoAnswerVoice or 
> > ModemAnswerCmd commented or not makes no difference.
> >
> > <snip>
> >
> > I have over 25 hours in Googling and experimenting (had 13 Hylafax 
> > users threads open in my web browser at one point) but all to no 
> > avail.  Please, can someone offer some guidance?
> >
> > <snip,  snip>
>
> As usual, I finally give up and ask for help and, within one hour solve 
> the problem on my own.
>
> The solution?  I changed this:
> RingsBeforeAnswer:    1
> DRingOn:    DRON=
> DRingOff:    DROF=
> ModemResetCmds:    AT+VDR=1,6
> DistinctiveRings:    F-5-4-10-5-5,F-5-4-10-5-4,V-18
> RingFax: DRON=5
> RingVoice: DRON=18
> NoAnswerVoice:    true
> ModemAnswerCmd:        AT+FCLASS=1;A
>
> ... to this...
> RingsBeforeAnswer:    1
> ModemResetCmds:    AT+VDR=1,2
> RingFax: DRON=5
> RingVoice: DRON=18
> NoAnswerVoice:    true
> ModemAnswerCmd:        AT+FCLASS=1;A
>
> Regards,
>     Dennis
>
> 6
>
>
> ____________________ HylaFAX(tm) Users Mailing List _______________________
>   To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
>   *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*