[hylafax-users] No receiver protocol (T.30 T1 timeout)

["Jorge Saraceno - Alicom Argentina" <jsaraceno@xxxxxxxxxxxxx>]

Hi Guys,

I trying to do my first faxserver mounted on Debian 2.6.22-3-686 with
Hylafax 5.1.7 and using one Diva Analog-8P 8-port fax card.
Using PSTN lines, I could send and receive faxes without problems, but using
a VoIP line on a Sipura/Linksys SPA-2100 connected vía analog port, appears
the error No receiver protocol (T.30 T1 timeout).
The complete log is:

Sep 26 15:53:01.18: [ 9011]: SESSION BEGIN 000000020 541147655657
Sep 26 15:53:01.18: [ 9011]: HylaFAX (tm) Version 4.4.4
Sep 26 15:53:01.18: [ 9011]: SEND FAX: JOB 14 DEST 47655657 COMMID 000000020
DEVICE '/dev/ttyds01' FROM 'fax08 <fax08>' USER $
Sep 26 15:53:01.18: [ 9011]: <-- [12:AT+FCLASS=1\r]
Sep 26 15:53:01.18: [ 9011]: --> [2:OK]
Sep 26 15:53:01.18: [ 9011]: DIAL 47655657
Sep 26 15:53:01.18: [ 9011]: <-- [13:ATDT47655657\r]
Sep 26 15:53:29.45: [ 9011]: --> [7:CONNECT]
Sep 26 15:53:29.48: [ 9011]: --> [5:ERROR]
Sep 26 15:53:29.48: [ 9011]: MODEM Command error
Sep 26 15:53:29.48: [ 9011]: FCS error
Sep 26 15:53:29.48: [ 9011]: <-- [10:AT+FRS=21\r]
Sep 26 15:53:29.48: [ 9011]: --> [2:OK]
Sep 26 15:53:29.48: [ 9011]: <-- [9:AT+FTH=3\r]
Sep 26 15:53:29.56: [ 9011]: --> [7:CONNECT]
Sep 26 15:53:29.56: [ 9011]: <-- data [3]
Sep 26 15:53:29.56: [ 9011]: <-- data [2]
Sep 26 15:53:30.73: [ 9011]: --> [2:OK]
Sep 26 15:53:30.73: [ 9011]: SEND send CRP (command repeat)
Sep 26 15:53:30.73: [ 9011]: <-- [9:AT+FRH=3\r]
Sep 26 15:53:37.73: [ 9011]: --> [0:]
Sep 26 15:53:37.73: [ 9011]: MODEM <Empty line>
Sep 26 15:53:37.73: [ 9011]: <-- data [1]
Sep 26 15:53:37.73: [ 9011]: --> [2:^P^C]
Sep 26 15:53:37.73: [ 9011]: --> [2:OK]
Sep 26 15:53:37.73: [ 9011]: <-- [9:AT+FRS=7\r]
Sep 26 15:53:37.73: [ 9011]: --> [2:OK]
Sep 26 15:53:37.73: [ 9011]: <-- [9:AT+FRH=3\r]
Sep 26 15:53:44.73: [ 9011]: --> [0:]
Sep 26 15:53:44.73: [ 9011]: MODEM <Empty line>
Sep 26 15:53:44.73: [ 9011]: <-- data [1]
Sep 26 15:53:44.73: [ 9011]: --> [2:^P^C]
Sep 26 15:53:44.73: [ 9011]: --> [2:OK]
Sep 26 15:53:44.73: [ 9011]: <-- [9:AT+FRS=7\r]
Sep 26 15:53:44.73: [ 9011]: --> [2:OK]
Sep 26 15:53:44.73: [ 9011]: <-- [9:AT+FRH=3\r]
Sep 26 15:53:51.73: [ 9011]: --> [0:]
Sep 26 15:53:51.73: [ 9011]: MODEM <Empty line>
Sep 26 15:53:51.73: [ 9011]: <-- data [1]
Sep 26 15:53:51.73: [ 9011]: --> [2:^P^C]
Sep 26 15:53:51.73: [ 9011]: --> [2:OK]
Sep 26 15:53:51.73: [ 9011]: <-- [9:AT+FRS=7\r]
Sep 26 15:53:51.73: [ 9011]: --> [2:OK]
Sep 26 15:53:51.73: [ 9011]: <-- [9:AT+FRH=3\r]
Sep 26 15:53:58.73: [ 9011]: --> [0:]
Sep 26 15:53:58.73: [ 9011]: MODEM <Empty line>
Sep 26 15:53:58.73: [ 9011]: <-- data [1]
Sep 26 15:53:58.73: [ 9011]: --> [2:^P^C]
Sep 26 15:53:58.73: [ 9011]: --> [2:OK]
Sep 26 15:53:58.73: [ 9011]: <-- [9:AT+FRS=7\r]
Sep 26 15:53:58.73: [ 9011]: --> [2:OK]
Sep 26 15:53:58.73: [ 9011]: <-- [9:AT+FRH=3\r]
Sep 26 15:54:05.73: [ 9011]: --> [0:]
Sep 26 15:54:05.73: [ 9011]: MODEM <Empty line>
Sep 26 15:54:05.73: [ 9011]: <-- data [1]
Sep 26 15:54:05.73: [ 9011]: --> [2:^P^C]
Sep 26 15:54:05.73: [ 9011]: --> [2:OK]
Sep 26 15:54:05.73: [ 9011]: <-- [9:AT+FRS=7\r]
Sep 26 15:54:05.73: [ 9011]: --> [2:OK]
Sep 26 15:54:05.73: [ 9011]: <-- [9:AT+FRH=3\r]
Sep 26 15:54:12.73: [ 9011]: --> [0:]
Sep 26 15:54:12.73: [ 9011]: MODEM <Empty line>
Sep 26 15:54:12.73: [ 9011]: <-- data [1]
Sep 26 15:54:12.73: [ 9011]: --> [2:^P^C]
Sep 26 15:54:12.73: [ 9011]: --> [2:OK]
Sep 26 15:54:12.73: [ 9011]: No receiver protocol (T.30 T1 timeout)
Sep 26 15:54:12.73: [ 9011]: SEND FAILED: JOB 14 DEST 47655657 ERR [126] No
receiver protocol (T.30 T1 timeout)
Sep 26 15:54:12.73: [ 9011]: <-- [9:AT+FRS=7\r]
Sep 26 15:54:12.73: [ 9011]: --> [2:OK]
Sep 26 15:54:12.73: [ 9011]: <-- [9:AT+FTH=3\r]
Sep 26 15:54:12.74: [ 9011]: --> [7:CONNECT]
Sep 26 15:54:12.74: [ 9011]: <-- data [3]
Sep 26 15:54:12.74: [ 9011]: <-- data [2]
Sep 26 15:54:13.90: [ 9011]: --> [2:OK]
Sep 26 15:54:13.90: [ 9011]: SEND FAILED: JOB 14 DEST 47655657 ERR [333] No
receiver protocol (T.30 T1 timeout); too many att$
Sep 26 15:54:14.90: [ 9011]: <-- [5:ATH0\r]
Sep 26 15:54:15.00: [ 9011]: --> [2:OK]
Sep 26 15:54:15.00: [ 9011]: SESSION END

I really don't know what's wrong...
Could you help me please?
Thanks in advance for your support.

Best regards,

Jorge Saraceno
 



____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*