Re: [hylafax-users] waiting for modem to come ready

[Enrique Arredondo <henry@xxxxxxxxxx>]

David Forrest wrote:
> On Thu, 28 Aug 2008, Enrique Arredondo wrote:
>
> > Hi I added a 2nd and 3rd modem to my RH server with faxaddmodem 
> > command and basicaly here's what it configured ,but I can't make 
> > these modems send faxes due to "waiting for modem to come ready" 
> > status, any clues of what's wrong with this picture ?
> >
> > Hmm, this looks like a Class 1 modem.
> > Product code (ATI0) is "5601".
> > Other information (ATI3) is "U.S. Robotics 56K FAX USB V1.1.0".
> > DTE-DCE flow control scheme [default]?
> > Modem manufacturer is "3Com U. S. Robotics".
> > Modem model is "3CP5610".
> >
> > Using prototype configuration file usr-xon...
> >
> > The modem configuration parameters are:
> >
> > ModemAnswerCmd:         AT+FCLASS=1A
> > ModemFlowControl:       xonxoff
> > ModemHardFlowCmd:       AT&H1&I0&R2
> > ModemMfrQueryCmd:       !USR
> > ModemModelQueryCmd:     ATI3
> > ModemNoFlowCmd:         AT&H0&I0&R1
> > ModemRate:              19200
> > ModemResultCodesCmd:    ATQ0X4
> > ModemRevQueryCmd:       ATI7
> > ModemSetupAACmd:        AT+FCLASS=0
> > ModemSetupDCDCmd:       AT&C1
> > ModemSetupDTRCmd:       ATS13=1&D2
> > ModemSoftFlowCmd:       AT&H2&I2&R1
> > Class1NFLOCmd:          AT&H0&I0&R1
> > Class1HFLOCmd:          AT&H1&I0&R2
> > Class1SFLOCmd:          ""
> > Class1ResponseWaitCmd:  AT+FRS=1
> > Class1SwitchingCmd:     "<delay\0727>"
> >
> >
> > [root@atkred etc]# faxstat
> > HylaFAX scheduler on atkred.com: Running
> > Modem ttyACM0 (+1.714.850.####): Waiting for modem to come ready
> > Modem ttyACM1 (+1.714.850.####): Waiting for modem to come ready
> > Modem ttyS0 (+1.714.850.####): Running and idle
> >
> >
> > Once I figure this out, will hylafax do load balance automatically on 
> > the 3 faxmodems ? or is there something else to configure ?
> >
> > thanks
> >
> > Enrique.
>
> Did you remember to start faxgettys on ttyACM0 & ttyACM1?
>
> David Forrest                     e-mail   drf@xxxxxxxxxxxxx
> Maple Park Development Corporation  http://www.maplepark.com
> St. Louis, Missouri
This is my log file when I run

[root@atkred etc]# /usr/local/sbin/faxgetty /dev/ttyACM1

Aug 28 22:06:56 atkred FaxGetty[19401]: OPEN /dev/ttyACM1  HylaFAX (tm) 
Version 4.4.4
Aug 28 22:06:56 atkred FaxGetty[19401]: Purge stale UUCP lock 
/var/lock/LCK..ttyACM1
Aug 28 22:07:13 atkred FaxGetty[19401]: /dev/ttyACM1: Can not initialize 
modem.
Aug 28 22:08:47 atkred FaxGetty[19401]: Unable to setup modem on 
/dev/ttyACM1; giving up after 2 attempts
Aug 28 22:08:47 atkred FaxGetty[19401]: CLOSE /dev/ttyACM1
Aug 28 22:08:47 atkred FaxQueuer[17983]: MODEM /dev/ttyACM1 appears to 
be wedged
Aug 28 22:08:47 atkred FaxQueuer[17983]: MODEM WEDGED: bin/wedged 
"ttyACM1" "/dev/ttyACM1"
Aug 28 22:08:48 atkred FaxQueuer[17983]: NOTIFY exit status: 0 (19404)

>


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*