Re: [hylafax-users] waiting for modem to come ready

[David Forrest <drf@xxxxxxxxxxxxx>]

On Thu, 28 Aug 2008, Enrique Arredondo wrote:

> Hi I added a 2nd and 3rd modem to my RH server with faxaddmodem command and 
> basicaly here's what it configured ,but I can't make these modems send faxes 
> due to "waiting for modem to come ready" status, any clues of what's wrong 
> with this picture ?
>
> Hmm, this looks like a Class 1 modem.
> Product code (ATI0) is "5601".
> Other information (ATI3) is "U.S. Robotics 56K FAX USB V1.1.0".
> DTE-DCE flow control scheme [default]?
> Modem manufacturer is "3Com U. S. Robotics".
> Modem model is "3CP5610".
>
> Using prototype configuration file usr-xon...
>
> The modem configuration parameters are:
>
> ModemAnswerCmd:         AT+FCLASS=1A
> ModemFlowControl:       xonxoff
> ModemHardFlowCmd:       AT&H1&I0&R2
> ModemMfrQueryCmd:       !USR
> ModemModelQueryCmd:     ATI3
> ModemNoFlowCmd:         AT&H0&I0&R1
> ModemRate:              19200
> ModemResultCodesCmd:    ATQ0X4
> ModemRevQueryCmd:       ATI7
> ModemSetupAACmd:        AT+FCLASS=0
> ModemSetupDCDCmd:       AT&C1
> ModemSetupDTRCmd:       ATS13=1&D2
> ModemSoftFlowCmd:       AT&H2&I2&R1
> Class1NFLOCmd:          AT&H0&I0&R1
> Class1HFLOCmd:          AT&H1&I0&R2
> Class1SFLOCmd:          ""
> Class1ResponseWaitCmd:  AT+FRS=1
> Class1SwitchingCmd:     "<delay\0727>"
>
>
> [root@atkred etc]# faxstat
> HylaFAX scheduler on atkred.com: Running
> Modem ttyACM0 (+1.714.850.####): Waiting for modem to come ready
> Modem ttyACM1 (+1.714.850.####): Waiting for modem to come ready
> Modem ttyS0 (+1.714.850.####): Running and idle
>
>
> Once I figure this out, will hylafax do load balance automatically on the 3 
> faxmodems ? or is there something else to configure ?
>
> thanks
>
> Enrique.

Did you remember to start faxgettys on ttyACM0 & ttyACM1?

David Forrest                     e-mail   drf@xxxxxxxxxxxxx
Maple Park Development Corporation  http://www.maplepark.com
St. Louis, Missouri


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*