Re: [hylafax-users] Can not get the DynamicConfig to work

[Mikhail Teterin <mi+kde@xxxxxxxxxxxxxxxxx>]

On четвер 01 травень 2008, Aidan Van Dyk wrote:
= Can you point out how the man pages could be enhanced?  The
= hylafax-config man page describing DynamicConfig explicitly references
= CallID1/CallID2, etc, which are also explictly referenced in all the
= CallIDPattern parts in the same man page.

That's a two-stage reference to CallIDPattern :-) Referencing the keyword 
directly from the DynamicConfig section would've saved me plenty of effort.

= > If the prefixes you list are the most common, should not something 
= > like "{NMBR|NAME|ANID|NDID}\s*=\s*" be the /default/ settings?..
= 
= Well, actually, they happen to be the correct settings on my testing
= desktop, which is running IAXModem, not a hardware modem.  But they also
= happen to not be right for the production systems I have.
 
= But looking at the modem default config templates, I *do* see commented
= CallIDPattern options listed in them, so generally, the config file
= produce by faxaddmodem will have samples that are "relevant" to the
= modem:

These should be processed by a regular expression: NMBR\s*=\s* would catch all 
known modems, for example...

The special spell needed to turn the CallerID-reporting on in the modem was 
also mentioned nowhere, BTW.

= In sections like:
= 	# If your line supports Caller-ID, you may want to uncomment this...
= 	# ModemResetCmds:       AT+VCID=1
= 	# CallIDPattern:        "NMBR="
= 	# CallIDPattern:        "NAME="

Why not have these always enabled? Even if modem reports an error to AT+VCID, 
just ignore it...

= What modem do you have? If you are willing to find out which template
= faxaddmodem picked, we can add those to that template too.

At the top of my config.ttyd0 it says:

	# Configuration for a Rockwell RC288DPi-based Class 1 modem

the actual model of the modem is: ROCKWELL RC288DPi/V2.081-03-K56_2M_DLS 
SupraExpress 56e - PC V.90.

Thanks! Yours,

	-mi


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*