[hylafax-users] CID and DID on Diva 4 BRI connected to PTP

[Sven Hergenhahn <svenxy@xxxxxxx>]

Hi All,

I'm having a (hopefully) last small problem with my setup:

I have successfully configured hylafax to retrieve the DID from the Diva
card (AT#CID=...), but now I do not get the Caller ID anymore:

Feb  4 17:08:16 x66 FaxGetty[27887]: STATE CHANGE: RUNNING -> LISTENING
Feb  4 17:08:16 x66 FaxGetty[27887]: --> [18:RING CID: 0 DAD: 9]

9 is the called ID (DID), that is correct, but neither logs nor faxinfo
nor anything else gets a Sender number.

Am I right in the assumption that the Caller ID here is 0? Maybe because
I'm calling internally (can't test externally currently...)?

If so, how would I capture that 0 (or whatever else it would send if
called from extern) to be used by Hylafax?

The relevant parts of my modem config are as follows (found parts of
that in other posts):


ModemResetCmds:         "ATX3#CID=7"
ModemDialCmd:           ATDT0%s@

# Put the Destination Address in CIDNumber. We can the reject calls on
the basis
# Of where we are sending them, instead of the Caller ID
CIDNumber:              "DAD: "
CIDName:                "CID: "
CallIDAnswerLength:q    "10"
QualifyCID:             etc/cid         # CID access control list file


Any hints are greatly appreciated.

Thanks,
Sven


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*