Re: [hylafax-users] No response to PPS repeated 3 times.:

[Willy Offermans <Willy@xxxxxxxxxxxxxxxxxxx>]

Hello HylaFAX friends,

On Mon, Jan 28, 2008 at 06:17:17AM -0800, Lee Howard wrote:
> Daren Russell wrote:
> >the equipment was a Canon Laser
> >Class 9000 Series (according to the hylafax log). 
> 
> HylaFAX's NSF parsing is quite accurate for the make (manufacturer) but 
> not for the model.  So Canon is quite likely correct.  The model may or 
> may not be accurate.
> 
> In the NSF any model identification is manufacturer-specific, and we 
> have not received any information from any manufacturer with regards to 
> understanding and interpreting their NSF signals.
> 
> Thanks,
> 
> Lee.
> 
> 
> ____________________ HylaFAX(tm) Users Mailing List _______________________
>  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
> On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
>  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
> 


Here we are again with the famous ``COMREC invalid response received to
PPS''-error. I have updated HylaFAX (not HylaFAX+) from HylaFAX (tm)
Version 4.3.4 to HylaFAX (tm) Version 4.4.4. Before, I had
already issues with ``COMREC invalid response ...'' and Canon Laser
faxmachines. Please look into the archives, if you like. Suddenly the
issue disappeared with HylaFAX (tm) Version 4.3.4, but starts again
with HylaFAX (tm) Version 4.4.4. Weird, isn't it? The following are the
tests as suggested in
http://article.gmane.org/gmane.comp.telephony.fax.hylafax.user/26090
I hope we can nail down the problem at last. It would relief me from
headaches, I can assure you.

############# TEST 1 ##############
####### Failed as expected ########

 ~> sendfax -n -3 -t 1 -F "test" -h modem@ -d +3292****** /tmp/test.ps
request id is 732 (group id 732) for host localhost (1 file)

Jan 28 17:17:29.61: [39020]: SESSION BEGIN 000013270 3292******
Jan 28 17:17:29.61: [39020]: HylaFAX (tm) Version 4.4.4
Jan 28 17:17:29.61: [39020]: SEND FAX: JOB 732 DEST +3292****** COMMID 000013270 DEVICE '/dev/modem' FROM 'User Surname <user@computer>' USER user
Jan 28 17:17:29.61: [39020]: <-- [14:AT+FCLASS=1.0\r]
Jan 28 17:17:29.62: [39020]: --> [2:OK]
Jan 28 17:17:29.64: [39020]: DIAL 003292******
Jan 28 17:17:29.64: [39020]: <-- [18:ATDT0003292******\r]
Jan 28 17:17:46.05: [39020]: --> [7:CONNECT]
Jan 28 17:17:47.42: [39020]: --> [2:OK]
Jan 28 17:17:47.42: [39020]: REMOTE NSF "00 00 11 80 00 8A 48 00 8B 00 80 80 80 02 01 01"
Jan 28 17:17:47.42: [39020]: NSF remote fax equipment: Canon Laser Class 2060
Jan 28 17:17:47.42: [39020]: <-- [9:AT+FRH=3\r]
Jan 28 17:17:47.44: [39020]: --> [7:CONNECT]
Jan 28 17:17:48.11: [39020]: --> [2:OK]
Jan 28 17:17:48.11: [39020]: REMOTE CSI ""
Jan 28 17:17:48.11: [39020]: <-- [9:AT+FRH=3\r]
Jan 28 17:17:48.13: [39020]: --> [7:CONNECT]
Jan 28 17:17:48.43: [39020]: --> [2:OK]
Jan 28 17:17:48.43: [39020]: REMOTE best rate 14400 bit/s
Jan 28 17:17:48.43: [39020]: REMOTE max A4 page width (215 mm)
Jan 28 17:17:48.43: [39020]: REMOTE max unlimited page length
Jan 28 17:17:48.43: [39020]: REMOTE best vres 15.4 line/mm
Jan 28 17:17:48.43: [39020]: REMOTE format support: MH, MR, MMR
Jan 28 17:17:48.43: [39020]: REMOTE supports T.30 Annex A, 256-byte ECM
Jan 28 17:17:48.43: [39020]: REMOTE best 10 ms/scanline
Jan 28 17:17:48.43: [39020]: USE 14400 bit/s
Jan 28 17:17:48.43: [39020]: USE error correction mode
Jan 28 17:17:48.43: [39020]: SEND file "docq/doc759.ps;c1"
Jan 28 17:17:48.43: [39020]: USE A4 page width (215 mm)
Jan 28 17:17:48.43: [39020]: USE unlimited page length
Jan 28 17:17:48.43: [39020]: USE 7.7 line/mm
Jan 28 17:17:48.43: [39020]: USE 2-D MMR
Jan 28 17:17:48.43: [39020]: USE 0 ms/scanline
Jan 28 17:17:48.43: [39020]: SEND training at v.17 14400 bit/s
Jan 28 17:17:48.43: [39020]: <-- [9:AT+FRS=7\r]
Jan 28 17:17:48.56: [39020]: --> [2:OK]
Jan 28 17:17:48.56: [39020]: <-- [9:AT+FTH=3\r]
Jan 28 17:17:48.61: [39020]: --> [7:CONNECT]
Jan 28 17:17:48.61: [39020]: <-- data [23]
Jan 28 17:17:48.61: [39020]: <-- data [2]
Jan 28 17:17:50.40: [39020]: --> [7:CONNECT]
Jan 28 17:17:50.40: [39020]: <-- data [7]
Jan 28 17:17:50.40: [39020]: <-- data [2]
Jan 28 17:17:50.87: [39020]: --> [2:OK]
Jan 28 17:17:50.87: [39020]: <-- [9:AT+FTS=7\r]
Jan 28 17:17:50.96: [39020]: --> [2:OK]
Jan 28 17:17:50.96: [39020]: <-- [11:AT+FTM=145\r]
Jan 28 17:17:51.00: [39020]: --> [7:CONNECT]
Jan 28 17:17:51.00: [39020]: <-- data [1024]
Jan 28 17:17:51.00: [39020]: <-- data [1024]
Jan 28 17:17:51.00: [39020]: <-- data [652]
Jan 28 17:17:53.20: [39020]: <-- data [2]
Jan 28 17:17:54.10: [39020]: --> [2:OK]
Jan 28 17:17:54.10: [39020]: <-- [9:AT+FRH=3\r]
Jan 28 17:17:54.55: [39020]: --> [7:CONNECT]
Jan 28 17:17:55.46: [39020]: --> [2:OK]
Jan 28 17:17:55.46: [39020]: TRAINING succeeded
Jan 28 17:17:55.46: [39020]: SEND begin page
Jan 28 17:17:55.46: [39020]: SEND EOFB
Jan 28 17:17:55.46: [39020]: SEND send frame number 0
Jan 28 17:17:55.46: [39020]: SEND send frame number 1
Jan 28 17:17:55.46: [39020]: SEND send frame number 2
Jan 28 17:17:55.46: [39020]: SEND send frame number 3
Jan 28 17:17:55.46: [39020]: SEND send frame number 4
Jan 28 17:17:55.46: [39020]: <-- [9:AT+FRS=7\r]
Jan 28 17:17:55.59: [39020]: --> [2:OK]
Jan 28 17:17:55.59: [39020]: <-- [11:AT+FTM=146\r]
Jan 28 17:17:55.62: [39020]: --> [7:CONNECT]
Jan 28 17:17:55.62: [39020]: <-- data [1033]
Jan 28 17:17:55.62: [39020]: <-- data [712]
Jan 28 17:17:55.62: [39020]: <-- data [2]
Jan 28 17:17:56.95: [39020]: --> [2:OK]
Jan 28 17:17:56.95: [39020]: <-- [9:AT+FTS=9\r]
Jan 28 17:17:57.06: [39020]: --> [2:OK]
Jan 28 17:17:57.06: [39020]: <-- [9:AT+FTH=3\r]
Jan 28 17:17:57.11: [39020]: --> [7:CONNECT]
Jan 28 17:17:57.11: [39020]: <-- data [7]
Jan 28 17:17:57.11: [39020]: <-- data [2]
Jan 28 17:17:58.53: [39020]: --> [2:OK]
Jan 28 17:17:58.53: [39020]: SEND send PPS (partial page signal)
Jan 28 17:17:58.53: [39020]: SEND send EOP (no more pages or documents)
Jan 28 17:17:58.53: [39020]: <-- [9:AT+FRH=3\r]
Jan 28 17:17:58.98: [39020]: --> [7:CONNECT]
Jan 28 17:17:59.88: [39020]: --> [2:OK]
Jan 28 17:17:59.88: [39020]: SEND recv DCN (disconnect)
Jan 28 17:17:59.88: [39020]: <-- [9:AT+FRS=7\r]
Jan 28 17:18:00.00: [39020]: --> [2:OK]
Jan 28 17:18:00.00: [39020]: COMREC invalid response received to PPS.
Jan 28 17:18:00.00: [39020]: SEND end page
Jan 28 17:18:00.00: [39020]: <-- [9:AT+FTH=3\r]
Jan 28 17:18:00.07: [39020]: --> [7:CONNECT]
Jan 28 17:18:00.07: [39020]: <-- data [3]
Jan 28 17:18:00.07: [39020]: <-- data [2]
Jan 28 17:18:01.37: [39020]: --> [2:OK]
Jan 28 17:18:01.37: [39020]: SEND FAILED: JOB 732 DEST +3292****** ERR [334] COMREC invalid response received to PPS.; too many attempts to send
Jan 28 17:18:02.37: [39020]: <-- [5:ATH0\r]
Jan 28 17:18:03.11: [39020]: --> [2:OK]
Jan 28 17:18:03.11: [39020]: SESSION END

############# TEST 2 ##############
############ Failed ###############

ModemSoftRTFCC: no

~> sendfax -n -3 -t 1 -F "test" -h modem@ -d +3292****** /tmp/test.ps
request id is 733 (group id 733) for host localhost (1 file)
Jan 28 17:23:24.88: [39284]: SESSION BEGIN 000013271 3292******
Jan 28 17:23:24.88: [39284]: HylaFAX (tm) Version 4.4.4
Jan 28 17:23:24.88: [39284]: SEND FAX: JOB 733 DEST +3292****** COMMID 000013271 DEVICE '/dev/modem' FROM 'User Surname <user@computer>' USER user
Jan 28 17:23:24.88: [39284]: <-- [14:AT+FCLASS=1.0\r]
Jan 28 17:23:24.90: [39284]: --> [2:OK]
Jan 28 17:23:24.90: [39284]: DIAL 003292******
Jan 28 17:23:24.90: [39284]: <-- [18:ATDT0003292******\r]
Jan 28 17:23:41.91: [39284]: --> [7:CONNECT]
Jan 28 17:23:43.27: [39284]: --> [2:OK]
Jan 28 17:23:43.27: [39284]: REMOTE NSF "00 00 11 80 00 8A 48 00 8B 00 80 80 80 02 01 01"
Jan 28 17:23:43.27: [39284]: NSF remote fax equipment: Canon Laser Class 2060
Jan 28 17:23:43.27: [39284]: <-- [9:AT+FRH=3\r]
Jan 28 17:23:43.29: [39284]: --> [7:CONNECT]
Jan 28 17:23:43.98: [39284]: --> [2:OK]
Jan 28 17:23:43.98: [39284]: REMOTE CSI ""
Jan 28 17:23:43.98: [39284]: <-- [9:AT+FRH=3\r]
Jan 28 17:23:44.00: [39284]: --> [7:CONNECT]
Jan 28 17:23:44.29: [39284]: --> [2:OK]
Jan 28 17:23:44.29: [39284]: REMOTE best rate 14400 bit/s
Jan 28 17:23:44.29: [39284]: REMOTE max A4 page width (215 mm)
Jan 28 17:23:44.29: [39284]: REMOTE max unlimited page length
Jan 28 17:23:44.29: [39284]: REMOTE best vres 15.4 line/mm
Jan 28 17:23:44.29: [39284]: REMOTE format support: MH, MR, MMR
Jan 28 17:23:44.29: [39284]: REMOTE supports T.30 Annex A, 256-byte ECM
Jan 28 17:23:44.29: [39284]: REMOTE best 10 ms/scanline
Jan 28 17:23:44.29: [39284]: USE 14400 bit/s
Jan 28 17:23:44.29: [39284]: USE error correction mode
Jan 28 17:23:44.29: [39284]: SEND file "docq/doc760.ps;c1"
Jan 28 17:23:44.29: [39284]: USE A4 page width (215 mm)
Jan 28 17:23:44.29: [39284]: USE unlimited page length
Jan 28 17:23:44.29: [39284]: USE 7.7 line/mm
Jan 28 17:23:44.29: [39284]: USE 2-D MMR
Jan 28 17:23:44.29: [39284]: USE 0 ms/scanline
Jan 28 17:23:44.29: [39284]: SEND training at v.17 14400 bit/s
Jan 28 17:23:44.29: [39284]: <-- [9:AT+FRS=7\r]
Jan 28 17:23:44.42: [39284]: --> [2:OK]
Jan 28 17:23:44.42: [39284]: <-- [9:AT+FTH=3\r]
Jan 28 17:23:44.47: [39284]: --> [7:CONNECT]
Jan 28 17:23:44.47: [39284]: <-- data [23]
Jan 28 17:23:44.47: [39284]: <-- data [2]
Jan 28 17:23:46.25: [39284]: --> [7:CONNECT]
Jan 28 17:23:46.25: [39284]: <-- data [7]
Jan 28 17:23:46.25: [39284]: <-- data [2]
Jan 28 17:23:46.71: [39284]: --> [2:OK]
Jan 28 17:23:46.71: [39284]: <-- [9:AT+FTS=7\r]
Jan 28 17:23:46.80: [39284]: --> [2:OK]
Jan 28 17:23:46.80: [39284]: <-- [11:AT+FTM=145\r]
Jan 28 17:23:46.84: [39284]: --> [7:CONNECT]
Jan 28 17:23:46.84: [39284]: <-- data [1024]
Jan 28 17:23:46.84: [39284]: <-- data [1024]
Jan 28 17:23:46.84: [39284]: <-- data [652]
Jan 28 17:23:49.04: [39284]: <-- data [2]
Jan 28 17:23:49.96: [39284]: --> [2:OK]
Jan 28 17:23:49.96: [39284]: <-- [9:AT+FRH=3\r]
Jan 28 17:23:50.40: [39284]: --> [7:CONNECT]
Jan 28 17:23:51.32: [39284]: --> [2:OK]
Jan 28 17:23:51.32: [39284]: TRAINING succeeded
Jan 28 17:23:51.32: [39284]: SEND begin page
Jan 28 17:23:51.32: [39284]: SEND EOFB
Jan 28 17:23:51.32: [39284]: SEND send frame number 0
Jan 28 17:23:51.32: [39284]: SEND send frame number 1
Jan 28 17:23:51.32: [39284]: SEND send frame number 2
Jan 28 17:23:51.32: [39284]: SEND send frame number 3
Jan 28 17:23:51.32: [39284]: SEND send frame number 4
Jan 28 17:23:51.32: [39284]: <-- [9:AT+FRS=7\r]
Jan 28 17:23:51.45: [39284]: --> [2:OK]
Jan 28 17:23:51.45: [39284]: <-- [11:AT+FTM=146\r]
Jan 28 17:23:51.49: [39284]: --> [7:CONNECT]
Jan 28 17:23:51.49: [39284]: <-- data [1033]
Jan 28 17:23:51.49: [39284]: <-- data [712]
Jan 28 17:23:51.49: [39284]: <-- data [2]
Jan 28 17:23:52.81: [39284]: --> [2:OK]
Jan 28 17:23:52.81: [39284]: <-- [9:AT+FTS=9\r]
Jan 28 17:23:52.92: [39284]: --> [2:OK]
Jan 28 17:23:52.92: [39284]: <-- [9:AT+FTH=3\r]
Jan 28 17:23:52.97: [39284]: --> [7:CONNECT]
Jan 28 17:23:52.97: [39284]: <-- data [7]
Jan 28 17:23:52.97: [39284]: <-- data [2]
Jan 28 17:23:54.40: [39284]: --> [2:OK]
Jan 28 17:23:54.40: [39284]: SEND send PPS (partial page signal)
Jan 28 17:23:54.40: [39284]: SEND send EOP (no more pages or documents)
Jan 28 17:23:54.40: [39284]: <-- [9:AT+FRH=3\r]
Jan 28 17:23:54.84: [39284]: --> [7:CONNECT]
Jan 28 17:23:55.73: [39284]: --> [2:OK]
Jan 28 17:23:55.73: [39284]: SEND recv DCN (disconnect)
Jan 28 17:23:55.73: [39284]: <-- [9:AT+FRS=7\r]
Jan 28 17:23:55.86: [39284]: --> [2:OK]
Jan 28 17:23:55.86: [39284]: COMREC invalid response received to PPS.
Jan 28 17:23:55.86: [39284]: SEND end page
Jan 28 17:23:55.86: [39284]: <-- [9:AT+FTH=3\r]
Jan 28 17:23:55.91: [39284]: --> [7:CONNECT]
Jan 28 17:23:55.91: [39284]: <-- data [3]
Jan 28 17:23:55.91: [39284]: <-- data [2]
Jan 28 17:23:57.22: [39284]: --> [2:OK]
Jan 28 17:23:57.22: [39284]: SEND FAILED: JOB 733 DEST +3292****** ERR [334] COMREC invalid response received to PPS.; too many attempts to send
Jan 28 17:23:58.22: [39284]: <-- [5:ATH0\r]
Jan 28 17:23:58.96: [39284]: --> [2:OK]
Jan 28 17:23:58.96: [39284]: SESSION END

############# TEST 3 ##############
############ Failed ###############

~> sendfax -n -1 -t 1 -F "test" -h modem@ -d +3292****** /tmp/test.ps
request id is 734 (group id 734) for host localhost (1 file)

Jan 28 17:27:35.94: [39476]: SESSION BEGIN 000013272 3292******
Jan 28 17:27:35.94: [39476]: HylaFAX (tm) Version 4.4.4
Jan 28 17:27:35.94: [39476]: SEND FAX: JOB 734 DEST +3292****** COMMID 000013272 DEVICE '/dev/modem' FROM 'User Surname <user@computer>' USER user
Jan 28 17:27:35.94: [39476]: <-- [14:AT+FCLASS=1.0\r]
Jan 28 17:27:35.96: [39476]: --> [2:OK]
Jan 28 17:27:35.96: [39476]: DIAL 003292******
Jan 28 17:27:35.96: [39476]: <-- [18:ATDT0003292******\r]
Jan 28 17:27:51.72: [39476]: --> [7:CONNECT]
Jan 28 17:27:53.06: [39476]: --> [2:OK]
Jan 28 17:27:53.06: [39476]: REMOTE NSF "00 00 11 80 00 8A 48 00 8B 00 80 80 80 02 01 01"
Jan 28 17:27:53.06: [39476]: NSF remote fax equipment: Canon Laser Class 2060
Jan 28 17:27:53.06: [39476]: <-- [9:AT+FRH=3\r]
Jan 28 17:27:53.08: [39476]: --> [7:CONNECT]
Jan 28 17:27:53.75: [39476]: --> [2:OK]
Jan 28 17:27:53.75: [39476]: REMOTE CSI ""
Jan 28 17:27:53.75: [39476]: <-- [9:AT+FRH=3\r]
Jan 28 17:27:53.77: [39476]: --> [7:CONNECT]
Jan 28 17:27:54.07: [39476]: --> [2:OK]
Jan 28 17:27:54.07: [39476]: REMOTE best rate 14400 bit/s
Jan 28 17:27:54.07: [39476]: REMOTE max A4 page width (215 mm)
Jan 28 17:27:54.07: [39476]: REMOTE max unlimited page length
Jan 28 17:27:54.07: [39476]: REMOTE best vres 15.4 line/mm
Jan 28 17:27:54.07: [39476]: REMOTE format support: MH, MR, MMR
Jan 28 17:27:54.07: [39476]: REMOTE supports T.30 Annex A, 256-byte ECM
Jan 28 17:27:54.07: [39476]: REMOTE best 10 ms/scanline
Jan 28 17:27:54.07: [39476]: USE 14400 bit/s
Jan 28 17:27:54.07: [39476]: USE error correction mode
Jan 28 17:27:54.07: [39476]: SEND file "docq/doc761.ps;01"
Jan 28 17:27:54.07: [39476]: USE A4 page width (215 mm)
Jan 28 17:27:54.07: [39476]: USE unlimited page length
Jan 28 17:27:54.07: [39476]: USE 7.7 line/mm
Jan 28 17:27:54.07: [39476]: USE 1-D MH
Jan 28 17:27:54.07: [39476]: USE 0 ms/scanline
Jan 28 17:27:54.07: [39476]: SEND training at v.17 14400 bit/s
Jan 28 17:27:54.07: [39476]: <-- [9:AT+FRS=7\r]
Jan 28 17:27:54.19: [39476]: --> [2:OK]
Jan 28 17:27:54.19: [39476]: <-- [9:AT+FTH=3\r]
Jan 28 17:27:54.24: [39476]: --> [7:CONNECT]
Jan 28 17:27:54.24: [39476]: <-- data [23]
Jan 28 17:27:54.24: [39476]: <-- data [2]
Jan 28 17:27:56.04: [39476]: --> [7:CONNECT]
Jan 28 17:27:56.04: [39476]: <-- data [7]
Jan 28 17:27:56.04: [39476]: <-- data [2]
Jan 28 17:27:56.49: [39476]: --> [2:OK]
Jan 28 17:27:56.49: [39476]: <-- [9:AT+FTS=7\r]
Jan 28 17:27:56.58: [39476]: --> [2:OK]
Jan 28 17:27:56.58: [39476]: <-- [11:AT+FTM=145\r]
Jan 28 17:27:56.62: [39476]: --> [7:CONNECT]
Jan 28 17:27:56.62: [39476]: <-- data [1024]
Jan 28 17:27:56.62: [39476]: <-- data [1024]
Jan 28 17:27:56.62: [39476]: <-- data [652]
Jan 28 17:27:58.82: [39476]: <-- data [2]
Jan 28 17:27:59.72: [39476]: --> [2:OK]
Jan 28 17:27:59.72: [39476]: <-- [9:AT+FRH=3\r]
Jan 28 17:28:00.18: [39476]: --> [7:CONNECT]
Jan 28 17:28:01.08: [39476]: --> [2:OK]
Jan 28 17:28:01.08: [39476]: TRAINING succeeded
Jan 28 17:28:01.08: [39476]: SEND begin page
Jan 28 17:28:01.08: [39476]: SEND 1D RTC
Jan 28 17:28:01.08: [39476]: SEND send frame number 0
Jan 28 17:28:01.08: [39476]: SEND send frame number 1
Jan 28 17:28:01.08: [39476]: SEND send frame number 2
Jan 28 17:28:01.08: [39476]: SEND send frame number 3
Jan 28 17:28:01.08: [39476]: SEND send frame number 4
Jan 28 17:28:01.08: [39476]: SEND send frame number 5
Jan 28 17:28:01.08: [39476]: SEND send frame number 6
Jan 28 17:28:01.08: [39476]: SEND send frame number 7
Jan 28 17:28:01.08: [39476]: SEND send frame number 8
Jan 28 17:28:01.08: [39476]: <-- [9:AT+FRS=7\r]
Jan 28 17:28:01.21: [39476]: --> [2:OK]
Jan 28 17:28:01.21: [39476]: <-- [11:AT+FTM=146\r]
Jan 28 17:28:01.25: [39476]: --> [7:CONNECT]
Jan 28 17:28:01.25: [39476]: <-- data [1029]
Jan 28 17:28:01.25: [39476]: <-- data [1026]
Jan 28 17:28:01.25: [39476]: <-- data [723]
Jan 28 17:28:02.28: [39476]: <-- data [2]
Jan 28 17:28:03.15: [39476]: --> [2:OK]
Jan 28 17:28:03.15: [39476]: <-- [9:AT+FTS=9\r]
Jan 28 17:28:03.26: [39476]: --> [2:OK]
Jan 28 17:28:03.26: [39476]: <-- [9:AT+FTH=3\r]
Jan 28 17:28:03.31: [39476]: --> [7:CONNECT]
Jan 28 17:28:03.31: [39476]: <-- data [7]
Jan 28 17:28:03.31: [39476]: <-- data [2]
Jan 28 17:28:04.73: [39476]: --> [2:OK]
Jan 28 17:28:04.73: [39476]: SEND send PPS (partial page signal)
Jan 28 17:28:04.73: [39476]: SEND send EOP (no more pages or documents)
Jan 28 17:28:04.73: [39476]: <-- [9:AT+FRH=3\r]
Jan 28 17:28:05.19: [39476]: --> [7:CONNECT]
Jan 28 17:28:06.10: [39476]: --> [2:OK]
Jan 28 17:28:06.10: [39476]: SEND recv DCN (disconnect)
Jan 28 17:28:06.10: [39476]: <-- [9:AT+FRS=7\r]
Jan 28 17:28:06.23: [39476]: --> [2:OK]
Jan 28 17:28:06.23: [39476]: COMREC invalid response received to PPS.
Jan 28 17:28:06.23: [39476]: SEND end page
Jan 28 17:28:06.23: [39476]: <-- [9:AT+FTH=3\r]
Jan 28 17:28:06.28: [39476]: --> [7:CONNECT]
Jan 28 17:28:06.28: [39476]: <-- data [3]
Jan 28 17:28:06.28: [39476]: <-- data [2]
Jan 28 17:28:07.60: [39476]: --> [2:OK]
Jan 28 17:28:07.60: [39476]: SEND FAILED: JOB 734 DEST +3292****** ERR [334] COMREC invalid response received to PPS.; too many attempts to send
Jan 28 17:28:08.60: [39476]: <-- [5:ATH0\r]
Jan 28 17:28:09.33: [39476]: --> [2:OK]
Jan 28 17:28:09.33: [39476]: SESSION END

############# TEST 4 ##############
############ Succeeded ############

~> sendfax -n -1 -E -t 1 -F "test" -h modem@ -d +3292****** /tmp/test.ps
request id is 735 (group id 735) for host localhost (1 file)

Jan 28 17:30:24.16: [39659]: SESSION BEGIN 000013273 3292******
Jan 28 17:30:24.16: [39659]: HylaFAX (tm) Version 4.4.4
Jan 28 17:30:24.16: [39659]: SEND FAX: JOB 735 DEST +3292****** COMMID 000013273 DEVICE '/dev/modem' FROM 'User Surname <user@computer>' USER user
Jan 28 17:30:24.21: [39659]: <-- [14:AT+FCLASS=1.0\r]
Jan 28 17:30:24.23: [39659]: --> [2:OK]
Jan 28 17:30:24.23: [39659]: DIAL 003292******
Jan 28 17:30:24.23: [39659]: <-- [18:ATDT0003292******\r]
Jan 28 17:30:40.56: [39659]: --> [7:CONNECT]
Jan 28 17:30:41.92: [39659]: --> [2:OK]
Jan 28 17:30:41.92: [39659]: REMOTE NSF "00 00 11 80 00 8A 48 00 8B 00 80 80 80 02 01 01"
Jan 28 17:30:41.92: [39659]: NSF remote fax equipment: Canon Laser Class 2060
Jan 28 17:30:41.92: [39659]: <-- [9:AT+FRH=3\r]
Jan 28 17:30:41.94: [39659]: --> [7:CONNECT]
Jan 28 17:30:42.62: [39659]: --> [2:OK]
Jan 28 17:30:42.62: [39659]: REMOTE CSI ""
Jan 28 17:30:42.62: [39659]: <-- [9:AT+FRH=3\r]
Jan 28 17:30:42.64: [39659]: --> [7:CONNECT]
Jan 28 17:30:42.94: [39659]: --> [2:OK]
Jan 28 17:30:42.94: [39659]: REMOTE best rate 14400 bit/s
Jan 28 17:30:42.94: [39659]: REMOTE max A4 page width (215 mm)
Jan 28 17:30:42.94: [39659]: REMOTE max unlimited page length
Jan 28 17:30:42.94: [39659]: REMOTE best vres 15.4 line/mm
Jan 28 17:30:42.94: [39659]: REMOTE format support: MH, MR, MMR
Jan 28 17:30:42.94: [39659]: REMOTE supports T.30 Annex A, 256-byte ECM
Jan 28 17:30:42.94: [39659]: REMOTE best 10 ms/scanline
Jan 28 17:30:42.94: [39659]: USE 14400 bit/s
Jan 28 17:30:42.94: [39659]: SEND file "docq/doc762.ps;01"
Jan 28 17:30:42.94: [39659]: USE A4 page width (215 mm)
Jan 28 17:30:42.94: [39659]: USE unlimited page length
Jan 28 17:30:42.94: [39659]: USE 7.7 line/mm
Jan 28 17:30:42.94: [39659]: USE 1-D MH
Jan 28 17:30:42.94: [39659]: USE 10 ms/scanline
Jan 28 17:30:42.94: [39659]: SEND training at v.17 14400 bit/s
Jan 28 17:30:42.94: [39659]: <-- [9:AT+FRS=7\r]
Jan 28 17:30:43.07: [39659]: --> [2:OK]
Jan 28 17:30:43.07: [39659]: <-- [9:AT+FTH=3\r]
Jan 28 17:30:43.12: [39659]: --> [7:CONNECT]
Jan 28 17:30:43.12: [39659]: <-- data [23]
Jan 28 17:30:43.12: [39659]: <-- data [2]
Jan 28 17:30:44.92: [39659]: --> [7:CONNECT]
Jan 28 17:30:44.92: [39659]: <-- data [6]
Jan 28 17:30:44.92: [39659]: <-- data [2]
Jan 28 17:30:45.35: [39659]: --> [2:OK]
Jan 28 17:30:45.35: [39659]: <-- [9:AT+FTS=7\r]
Jan 28 17:30:45.44: [39659]: --> [2:OK]
Jan 28 17:30:45.44: [39659]: <-- [11:AT+FTM=145\r]
Jan 28 17:30:45.48: [39659]: --> [7:CONNECT]
Jan 28 17:30:45.48: [39659]: <-- data [1024]
Jan 28 17:30:45.48: [39659]: <-- data [1024]
Jan 28 17:30:45.48: [39659]: <-- data [652]
Jan 28 17:30:47.68: [39659]: <-- data [2]
Jan 28 17:30:48.59: [39659]: --> [2:OK]
Jan 28 17:30:48.59: [39659]: <-- [9:AT+FRH=3\r]
Jan 28 17:30:49.02: [39659]: --> [7:CONNECT]
Jan 28 17:30:49.94: [39659]: --> [2:OK]
Jan 28 17:30:49.94: [39659]: TRAINING succeeded
Jan 28 17:30:49.94: [39659]: <-- [9:AT+FRS=7\r]
Jan 28 17:30:50.07: [39659]: --> [2:OK]
Jan 28 17:30:50.07: [39659]: <-- [11:AT+FTM=146\r]
Jan 28 17:30:50.11: [39659]: --> [7:CONNECT]
Jan 28 17:30:50.11: [39659]: SEND begin page
Jan 28 17:30:50.11: [39659]: <-- data [1024]
Jan 28 17:30:50.11: [39659]: <-- data [1025]
Jan 28 17:30:50.11: [39659]: <-- data [1026]
Jan 28 17:30:51.13: [39659]: <-- data [1027]
Jan 28 17:30:51.13: [39659]: <-- data [423]
Jan 28 17:30:51.13: [39659]: SENT 4516 bytes of data
Jan 28 17:30:51.13: [39659]: SEND 1D RTC
Jan 28 17:30:51.13: [39659]: <-- data [29]
Jan 28 17:30:51.13: [39659]: <-- data [2]
Jan 28 17:30:51.13: [39659]: SEND end page
Jan 28 17:30:52.99: [39659]: --> [2:OK]
Jan 28 17:30:52.99: [39659]: <-- [9:AT+FTS=9\r]
Jan 28 17:30:53.10: [39659]: --> [2:OK]
Jan 28 17:30:53.10: [39659]: SEND send EOP (no more pages or documents)
Jan 28 17:30:53.10: [39659]: <-- [9:AT+FTH=3\r]
Jan 28 17:30:53.15: [39659]: --> [7:CONNECT]
Jan 28 17:30:53.15: [39659]: <-- data [3]
Jan 28 17:30:53.15: [39659]: <-- data [2]
Jan 28 17:30:54.47: [39659]: --> [2:OK]
Jan 28 17:30:54.47: [39659]: <-- [9:AT+FRH=3\r]
Jan 28 17:30:54.93: [39659]: --> [7:CONNECT]
Jan 28 17:30:55.82: [39659]: --> [2:OK]
Jan 28 17:30:55.82: [39659]: SEND recv MCF (message confirmation)
Jan 28 17:30:55.82: [39659]: <-- [9:AT+FRS=7\r]
Jan 28 17:30:55.82: [39659]: SEND FAX (000013273): FROM user@computer TO +3292****** (page 1 of 1 sent in 0:13)
Jan 28 17:30:55.94: [39659]: --> [2:OK]
Jan 28 17:30:55.94: [39659]: SEND FAX (000013273): FROM user@computer TO +3292****** (docq/doc762.ps;01 sent in 0:13)
Jan 28 17:30:56.82: [39659]: <-- [9:AT+FTH=3\r]
Jan 28 17:30:56.88: [39659]: --> [7:CONNECT]
Jan 28 17:30:56.88: [39659]: <-- data [3]
Jan 28 17:30:56.88: [39659]: <-- data [2]
Jan 28 17:30:58.19: [39659]: --> [2:OK]
Jan 28 17:30:59.19: [39659]: <-- [5:ATH0\r]
Jan 28 17:30:59.94: [39659]: --> [2:OK]
Jan 28 17:30:59.94: [39659]: SESSION END

############# TEST 5 ##############
############ Succeeded ############

``ModemSoftRTFCC: no'' removed from modem.config

sendfax -n -1 -E -t 1 -F "test" -h modem@ -d +3292****** /tmp/test.ps

Jan 28 17:49:33.57: [40213]: SESSION BEGIN 000013274 3292******
Jan 28 17:49:33.57: [40213]: HylaFAX (tm) Version 4.4.4
Jan 28 17:49:33.57: [40213]: SEND FAX: JOB 736 DEST +3292****** COMMID 000013274 DEVICE '/dev/modem' FROM 'User Surname <user@computer>' USER user
Jan 28 17:49:33.58: [40213]: <-- [14:AT+FCLASS=1.0\r]
Jan 28 17:49:33.59: [40213]: --> [2:OK]
Jan 28 17:49:33.59: [40213]: DIAL 003292******
Jan 28 17:49:33.59: [40213]: <-- [18:ATDT0003292******\r]
Jan 28 17:49:50.09: [40213]: --> [7:CONNECT]
Jan 28 17:49:51.45: [40213]: --> [2:OK]
Jan 28 17:49:51.45: [40213]: REMOTE NSF "00 00 11 80 00 8A 48 00 8B 00 80 80 80 02 01 01"
Jan 28 17:49:51.45: [40213]: NSF remote fax equipment: Canon Laser Class 2060
Jan 28 17:49:51.45: [40213]: <-- [9:AT+FRH=3\r]
Jan 28 17:49:51.47: [40213]: --> [7:CONNECT]
Jan 28 17:49:52.13: [40213]: --> [2:OK]
Jan 28 17:49:52.13: [40213]: REMOTE CSI ""
Jan 28 17:49:52.13: [40213]: <-- [9:AT+FRH=3\r]
Jan 28 17:49:52.15: [40213]: --> [7:CONNECT]
Jan 28 17:49:52.45: [40213]: --> [2:OK]
Jan 28 17:49:52.45: [40213]: REMOTE best rate 14400 bit/s
Jan 28 17:49:52.45: [40213]: REMOTE max A4 page width (215 mm)
Jan 28 17:49:52.45: [40213]: REMOTE max unlimited page length
Jan 28 17:49:52.45: [40213]: REMOTE best vres 15.4 line/mm
Jan 28 17:49:52.45: [40213]: REMOTE format support: MH, MR, MMR
Jan 28 17:49:52.45: [40213]: REMOTE supports T.30 Annex A, 256-byte ECM
Jan 28 17:49:52.45: [40213]: REMOTE best 10 ms/scanline
Jan 28 17:49:52.45: [40213]: USE 14400 bit/s
Jan 28 17:49:52.45: [40213]: SEND file "docq/doc763.ps;01"
Jan 28 17:49:52.45: [40213]: USE A4 page width (215 mm)
Jan 28 17:49:52.45: [40213]: USE unlimited page length
Jan 28 17:49:52.45: [40213]: USE 7.7 line/mm
Jan 28 17:49:52.45: [40213]: USE 2-D MR
Jan 28 17:49:52.45: [40213]: USE 10 ms/scanline
Jan 28 17:49:52.45: [40213]: SEND training at v.17 14400 bit/s
Jan 28 17:49:52.45: [40213]: <-- [9:AT+FRS=7\r]
Jan 28 17:49:52.57: [40213]: --> [2:OK]
Jan 28 17:49:52.57: [40213]: <-- [9:AT+FTH=3\r]
Jan 28 17:49:52.62: [40213]: --> [7:CONNECT]
Jan 28 17:49:52.62: [40213]: <-- data [23]
Jan 28 17:49:52.62: [40213]: <-- data [2]
Jan 28 17:49:54.40: [40213]: --> [7:CONNECT]
Jan 28 17:49:54.40: [40213]: <-- data [6]
Jan 28 17:49:54.40: [40213]: <-- data [2]
Jan 28 17:49:54.84: [40213]: --> [2:OK]
Jan 28 17:49:54.84: [40213]: <-- [9:AT+FTS=7\r]
Jan 28 17:49:54.93: [40213]: --> [2:OK]
Jan 28 17:49:54.93: [40213]: <-- [11:AT+FTM=145\r]
Jan 28 17:49:54.97: [40213]: --> [7:CONNECT]
Jan 28 17:49:54.97: [40213]: <-- data [1024]
Jan 28 17:49:54.97: [40213]: <-- data [1024]
Jan 28 17:49:54.97: [40213]: <-- data [652]
Jan 28 17:49:57.17: [40213]: <-- data [2]
Jan 28 17:49:58.08: [40213]: --> [2:OK]
Jan 28 17:49:58.08: [40213]: <-- [9:AT+FRH=3\r]
Jan 28 17:49:58.53: [40213]: --> [7:CONNECT]
Jan 28 17:49:59.42: [40213]: --> [2:OK]
Jan 28 17:49:59.42: [40213]: TRAINING succeeded
Jan 28 17:49:59.42: [40213]: <-- [9:AT+FRS=7\r]
Jan 28 17:49:59.55: [40213]: --> [2:OK]
Jan 28 17:49:59.55: [40213]: <-- [11:AT+FTM=146\r]
Jan 28 17:49:59.59: [40213]: --> [7:CONNECT]
Jan 28 17:49:59.59: [40213]: SEND begin page
Jan 28 17:49:59.59: [40213]: Reading MH-compressed image file
Jan 28 17:49:59.59: [40213]: <-- data [1025]
Jan 28 17:49:59.59: [40213]: <-- data [1025]
Jan 28 17:49:59.59: [40213]: <-- data [1027]
Jan 28 17:50:00.62: [40213]: <-- data [577]
Jan 28 17:50:00.62: [40213]: SENT 3647 bytes of data
Jan 28 17:50:00.62: [40213]: <-- data [752]
Jan 28 17:50:00.62: [40213]: SENT 733 bytes of data
Jan 28 17:50:00.62: [40213]: SEND 2D RTC
Jan 28 17:50:00.62: [40213]: <-- data [30]
Jan 28 17:50:00.62: [40213]: <-- data [2]
Jan 28 17:50:00.62: [40213]: SEND end page
Jan 28 17:50:02.41: [40213]: --> [2:OK]
Jan 28 17:50:02.41: [40213]: <-- [9:AT+FTS=9\r]
Jan 28 17:50:02.52: [40213]: --> [2:OK]
Jan 28 17:50:02.52: [40213]: SEND send EOP (no more pages or documents)
Jan 28 17:50:02.52: [40213]: <-- [9:AT+FTH=3\r]
Jan 28 17:50:02.57: [40213]: --> [7:CONNECT]
Jan 28 17:50:02.57: [40213]: <-- data [3]
Jan 28 17:50:02.57: [40213]: <-- data [2]
Jan 28 17:50:03.88: [40213]: --> [2:OK]
Jan 28 17:50:03.88: [40213]: <-- [9:AT+FRH=3\r]
Jan 28 17:50:04.38: [40213]: --> [7:CONNECT]
Jan 28 17:50:05.27: [40213]: --> [2:OK]
Jan 28 17:50:05.27: [40213]: SEND recv MCF (message confirmation)
Jan 28 17:50:05.27: [40213]: <-- [9:AT+FRS=7\r]
Jan 28 17:50:05.27: [40213]: SEND FAX (000013274): FROM user@computer TO +3292****** (page 1 of 1 sent in 0:13)
Jan 28 17:50:05.40: [40213]: --> [2:OK]
Jan 28 17:50:05.40: [40213]: SEND FAX (000013274): FROM user@computer TO +3292****** (docq/doc763.ps;01 sent in 0:13)
Jan 28 17:50:06.28: [40213]: <-- [9:AT+FTH=3\r]
Jan 28 17:50:06.33: [40213]: --> [7:CONNECT]
Jan 28 17:50:06.33: [40213]: <-- data [3]
Jan 28 17:50:06.33: [40213]: <-- data [2]
Jan 28 17:50:07.64: [40213]: --> [2:OK]
Jan 28 17:50:08.64: [40213]: <-- [5:ATH0\r]
Jan 28 17:50:09.37: [40213]: --> [2:OK]
Jan 28 17:50:09.37: [40213]: SESSION END

-- 
Met vriendelijke groeten,
With kind regards,
Mit freundlichen Gruessen,
De jrus wah,

Willy

*************************************
W.K. Offermans
Home:   +31 45 544 49 44
Mobile: +31 653 27 16 23
e-mail: Willy@xxxxxxxxxxxxxxxxxxx

                                       Powered by ....

                                            (__)
                                         \\\'',)
                                           \/  \ ^
                                           .\._/_)

                                       www.FreeBSD.org


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*