Re: [hylafax-users] patton 2977 configuration

[ACL <access_you@xxxxxxxxx>]

Dear Brent Butler,

Could u send me your modem config (config.ttyXXX)?

Modem is configured as class 2.0. Outbound fax is ok but inbound fax (or even human call) is not answered.

log:
Jan 23 22:23:19.43: [10281]: SESSION BEGIN 000000026 110
Jan 23 22:23:19.43: [10281]: HylaFAX (tm) Version 4.4.3
Jan 23 22:23:19.43: [10281]: <-- [15:AT+FCC=,,,,1;A\r]
Jan 23 22:23:28.41: [10281]: --> [7:+FHS:71]
Jan 23 22:23:28.41: [10281]: REMOTE HANGUP: RSPREC error/got DCN (code 71)
Jan 23 22:23:28.41: [10281]: ANSWER: Ring detected without successful handshake
Jan 23 22:23:28.41: [10281]: Ring detected without successful handshake
Jan 23 22:23:28.41: [10281]: SESSION END

config.ttyG0
ModemType:              Class2.0        # use this to supply a
 hint
ModemRate:              19200
ModemFlowControl:       rtscts
ModemNoFlowCmd:         AT&K0
ModemSoftFlowCmd:      AT&K4
ModemHardFlowCmd:       AT&K3

Class2APCmd:           AT+FAP=1,1,1   
Class2CQCmd:           AT+FCQ=2,2

ModemAnswerCmd:                AT+FCC=,,,,1;A 
ModemSetupAACmd: AT+FAA=0      

config:
LogFacility:            daemon
CountryCode:           
 1
AreaCode:               1
LongDistancePrefix:     1
InternationalPrefix:    011
DialStringRules:        etc/dialrules
ServerTracing:          1
AdaptiveAnswer: No


Brent Butler <bbutler@xxxxxxxxxxx> wrote:

I use Digi's drivers. They still maintain their Acceleport RAS line
and support the 2977 with that driver. All the latest Linux
kernels/distributions are supported.

I set them up as class 2.0 and send and receive several hundred faxes a day.

-Brent

On Jan 16, 2008 12:03 AM, Lee Howard wrote:
> ACL wrote:
> > I have installed patton driver (padm_1_20_1) from their website. Linux
> > is redhat 9
>
> The Patton 2977 works best in Class 2.0 (with ECM *disabled*) when using
> the default firmware that comes in the drivers. It's not as bad as it is
> in Class 1, but it still is quite bad (not having ECM is a big drawback,
> in my opinion).
>
> However, I've been relatively happy when using some fax-specific
> firmware that I've gotten from Patton directly. The ATI responses will
> look like this:
>
> ATI0: Digi RAS modem 56000
> ATI3: V20040915-K56_DS
> ATI4: PATTON56K_RAS
> ATI9: (1.00DBI0061\00000000\MODEM\\AccelePort RAS 4__)
>
> Then it runs quite well in Class 1. You may want to contact Patton and
> request this specific revision of the hlcf.bin firmware file.
>
> Thanks,
>
> Lee.
>
>
>
> ____________________ HylaFAX(tm) Users Mailing List _______________________
> To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
> On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
> *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
>
>

---

Never miss a thing.   Make Yahoo your homepage.