Re: [hylafax-users] re¡G Re: patton 2977 configuration

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

ACL wrote:
> I have received the fax firmware. I configured the modem as class 1 
> using hylafax default setting. I could send and receive fax ok.
>
> I tried to receive fax from mainpine (which also send fax to 2977 
> without a single error in the log).  The fax received is ok but the 
> log contains many "modem command errors" and "no carrier".

NO CARRIER and ERROR do not necessarily indicate problems.

> Feb 01 00:19:22.10: [ 4485]: <-- [9:AT+FRH=3\r]
> Feb 01 00:19:25.25: [ 4485]: --> [7:CONNECT]
> Feb 01 00:19:26.38: [ 4485]: --> [5:ERROR]

> Feb 01 00:19:52.48: [ 4485]: <-- [9:AT+FRH=3\r]
> Feb 01 00:19:55.63: [ 4485]: --> [7:CONNECT]
> Feb 01 00:19:56.78: [ 4485]: --> [5:ERROR]

These don't represent mistakes so much as they indicate that the HDLC 
frame was received corrupted.  As HylaFAX was able to recover from it 
you should consider this to be normal.

Thanks,

Lee.


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*