Re: [hylafax-users] patton 2977 configuration

[ACL <access_you@xxxxxxxxx>]

sorry, I made a mistake. I would like to clarify:

1. the modem is able to receive fax from fax machine
2. the modem is unable to receive fax if the sending fax machine does not give CNG tone during the initial few secs. eg. the fax machine requires user to hit a START button to give cng tone. this type of call fails.

I think this is related to class 2.0 (if configured as class 1, no such problem but fails to train with most fax machines). Any thing we could do to fix it?

Brent Butler <bbutler@xxxxxxxxxxx> wrote:

Are your faxgetty's running? My notes on inittab entry for these and
the config files is included in my previous email.

-Brent



On Jan 23, 2008 9:34 AM, ACL wrote:
> Dear Brent Butler,
>
> Could u send me your modem config (config.ttyXXX)?
>
> Modem is configured as class 2.0. Outbound fax is ok but inbound fax (or
> even human call) is not answered.
>
> log:
> Jan 23 22:23:19.43: [10281]: SESSION BEGIN 000000026 110
> Jan 23 22:23:19.43: [10281]: HylaFAX (tm) Version 4.4.3
> Jan 23 22:23:19.43: [10281]: <-- [15:AT+FCC=,,,,1;A\r]
> Jan 23 22:23:28.41: [10281]: --> [7:+FHS:71]
> Jan 23 22:23:28.41: [10281]: REMOTE HANGUP: RSPREC error/got DCN (code 71)
> Jan 23 22:23:28.41: [10281]: ANSWER: Ring detected without successful
> handshake
> Jan 23 22:23:28.41: [10281]: Ring detected without successful handshake
> Jan 23 22:23:28.41: [10281]: SESSION END
>
> config.ttyG0
>
> ModemType: Class2.0 # use this to supply a hint
> ModemRate: 19200
> ModemFlowControl: rtscts
> ModemNoFlowCmd: AT&K0
> ModemSoftFlowCmd: AT&K4
> ModemHardFlowCmd: AT&K3
>
> Class2APCmd: AT+FAP=1,1,1
> Class2CQCmd: AT+FCQ=2,2
>
> ModemAnswerCmd: AT+FCC=,,,,1;A
> ModemSetupAACmd: AT+FAA=0
>
> config:
> LogFacility: daemon
> CountryCode: 1
> AreaCode: 1
>
> LongDistancePrefix: 1
> InternationalPrefix: 011
> DialStringRules: etc/dialrules
> ServerTracing: 1
> AdaptiveAnswer: No
>
>
>
> Brent Butler wrote:
> I use Digi's drivers. They still maintain their Acceleport RAS line
> and support the 2977 with that driver. All the latest Linux
> kernels/distributions are supported.
>
> I set them up as class 2.0 and send and receive several hundred faxes a day.
>
> -Brent
>
> On Jan 16, 2008 12:03 AM, Lee Howard wrote:
> > ACL wrote:
> > > I have installed patton driver (padm_1_20_1) from their website. Linux
> > > is redhat 9
> >
> > The Patton 2977 works best in Class 2.0 (with ECM *disabled*) when using
> > the default firmware that comes in the drivers. It's not as bad as it is
> > in Class 1, but it still is quite bad (not having ECM is a big drawback,
> > in my opinion).
> >
> > However, I've been relatively happy when using some fax-specific
> > firmware that I've gotten from Patton directly. The ATI responses will
> > look like this:
> >
> > ATI0: Digi RAS modem 56000
> > ATI3: V20040915-K56_DS
> > ATI4: PATTON56K_RAS
> > ATI9: (1.00DBI0061\00000000\MODEM\\AccelePort RAS 4__)
> >
> > Then it runs quite well in Class 1. You may want to contact Patton and
> > request this specific revision of the hlcf.bin firmware file.
> >
> > Thanks,
> >
> > Lee.
> >
> >
> >
> > ____________________ HylaFAX(tm) Users Mailing List
> _______________________
> > To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
> > On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
> > *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
> >
> >
>
>
>
> ________________________________
> Never miss a thing. Make Yahoo your homepage.

---

Looking for last minute shopping deals?  
Find them fast with Yahoo! Search.