Re: [hylafax-users] 回复： Re: One question about sending fax...

["Andrew Rinaldi" <andrew.rinaldi@xxxxxxxxxxxx>]

Hi Dennis,

If you are only interested in the start of the fax (during the CNG tones)
then it's possible to modify the behaviour of HylaFAX.  However, this is
very dependant on the modem and I suspect that you will be unable to find a
modem that can do this reliably (and still provide a good fax engine).

Regards

Andrew Rinaldi
Mainpine Developer Support
USA +1 503 822 9944 | UK +44 8458 909438
andrew.rinaldi@xxxxxxxxxxxx | www.mainpine.com

-----Original Message-----
From: hylafax-users-bounce@xxxxxxxxxxx [mailto:hylafax-users-bounce@hylafax.
org] On Behalf Of hui zhuu
Sent: 05 January 2008 06:21
To: andrew.rinaldi@xxxxxxxxxxxx; hylafax-users@xxxxxxxxxxx
Subject: [hylafax-users] 回复： Re: One question about sending fax...

Hi Andrew,

Thanks for your information.

But for a traditional fax machine, normally when i fax, I dial the number
first, and then if I hear the beeps(carrier signal?) I press the "Start"
button on the machine, and it's done. 

Sometimes instead of the beeps, i hear people say "hello" on the phone, and
I have to ask them to give the fax signal before everything goes on.

Therefore I think it's better if hylafax can distinguish between fax carrier
signal and voice. And for voice condition, hylafax can play a message first
and wait for the carrier signal.

Regards,

Dennis

--- Andrew Rinaldi <andrew.rinaldi@xxxxxxxxxxxx>写道:

> Hi Dennis,
> 
> Any analog fax device (including HylaFAX) would eventually see this 
> 'interruption' as a failure.  If the interruption was short then 
> HylaFAX might recover and successfully send the fax if the recipient 
> supports ECM.
> 
> Theoretically it would be possible to detect the remote interruption 
> and play a message.  However, I don't think that any hardware or 
> software has fully implemented such a feature.
> 
> Regards
> 
> Andrew Rinaldi
> Mainpine Developer Support
> USA +1 503 822 9944 | UK +44 8458 909438 andrew.rinaldi@xxxxxxxxxxxx | 
> www.mainpine.com
> 
> -----Original Message-----
> From: hylafax-users-bounce@xxxxxxxxxxx 
> [mailto:hylafax-users-bounce@hylafax.
> org] On Behalf Of hui zhuu
> Sent: 04 January 2008 01:39
> To: hylafax-users@xxxxxxxxxxx
> Subject: [hylafax-users] One question about sending fax...
> 
> Hello all,
> 
> I am a hylafax newbie and trying to setup the server on the Fedora 
> Core distribution, anyway, not successful yet.
> 
> I am just curious to ask what will happen when the receiver manually 
> pick up the phone in the process of initiating a sending operation?
> 
> Can hylafax notify the receiver with a message like "I am sending a 
> fax, drop me a fax signal"?
> 
> Or just hylafax thinks the other end not a fax machine and withdraw 
> with a failure?
> 
> thx!
> 
> dennis
> 
> 
>      
>
___________________________________________________________
> 雅虎邮箱传递新年祝福，个性贺卡送亲朋！
>
http://cn.mail.yahoo.com/gc/index.php?entry=5&souce=mail_mailletter_tagline
> 
> 
> ____________________ HylaFAX(tm) Users Mailing List 
> _______________________
>   To subscribe/unsubscribe, click
> http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe
> hylafax-users-request@xxxxxxxxxxx < /dev/null
>   *To learn about commercial HylaFAX(tm) support, mail 
> sales@xxxxxxxxx*
> 
> 
> 



      ___________________________________________________________
雅虎邮箱传递新年祝福，个性贺卡送亲朋！
http://cn.mail.yahoo.com/gc/index.php?entry=5&souce=mail_mailletter_tagline


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*

<<attachment: winmail.dat>>