[hylafax-users] "COMREC invalid response.." persisting in HylaFAX+ 5.2.0

[Walter Hop <hylafax@xxxxxxxxxxxxxxxxxx>]

Hi all,

as can be seen in my email at 
http://www.hylafax.org/archive/2007-12/msg00074.php ,
I have had some troubles faxing to certain destinations with HylaFAX 4.3.4.

As Lee promptly suggested, I have installed HylaFAX+ 5.2.0 from source now.

Unfortunately, the problem seems to persist. The first "known bad" 
remote set that I tried, still produces a "COMREC invalid response 
received to PPS" error. The encoding is MMR.

The logfile from 5.2.0 is attached. I'm happy to debug!

Cheers!
Walter


__

Dec 12 14:59:02.53: [ 1373]: SESSION BEGIN 000000022 +3232xxxxxx
Dec 12 14:59:02.53: [ 1373]: HylaFAX (tm) Version 5.2.0
Dec 12 14:59:02.53: [ 1373]: SEND FAX: JOB 9 DEST 003232xxxxxx COMMID 
000000022 DEVICE '/dev/cuad0' FROM 'System Administrator <root@test>' 
USER root
Dec 12 14:59:02.53: [ 1373]: STATE CHANGE: RUNNING -> SENDING
Dec 12 14:59:02.53: [ 1373]: <-- [12:AT+FCLASS=1\r]
Dec 12 14:59:02.55: [ 1373]: --> [2:OK]
Dec 12 14:59:02.55: [ 1373]: DIAL 003232xxxxxx
Dec 12 14:59:02.55: [ 1373]: <-- [19:ATDT0,003232xxxxxx\r]
Dec 12 14:59:17.33: [ 1373]: --> [7:CONNECT]
Dec 12 14:59:19.10: [ 1373]: --> HDLC<25:FF C0 02 1C 8A 04 04 04 04 04 
04 04 04 04 04 04 04 04 04 04 04 04 04 94 EE>
Dec 12 14:59:19.10: [ 1373]: --> [2:OK]
Dec 12 14:59:19.10: [ 1373]: REMOTE CSI "Q8"
Dec 12 14:59:19.10: [ 1373]: <-- [9:AT+FRH=3\r]
Dec 12 14:59:19.11: [ 1373]: --> [7:CONNECT]
Dec 12 14:59:19.45: [ 1373]: --> HDLC<9:FF C8 01 00 77 1F 22 F8 96>
Dec 12 14:59:19.45: [ 1373]: --> [2:OK]
Dec 12 14:59:19.45: [ 1373]: REMOTE best rate 14400 bit/s
Dec 12 14:59:19.45: [ 1373]: REMOTE max A4 page width (215 mm)
Dec 12 14:59:19.45: [ 1373]: REMOTE max unlimited page length
Dec 12 14:59:19.45: [ 1373]: REMOTE best vres 7.7 line/mm
Dec 12 14:59:19.45: [ 1373]: REMOTE format support: MH, MR, MMR
Dec 12 14:59:19.45: [ 1373]: REMOTE supports T.30 Annex A, 256-byte ECM
Dec 12 14:59:19.45: [ 1373]: REMOTE best 0 ms/scanline
Dec 12 14:59:19.45: [ 1373]: USE 14400 bit/s
Dec 12 14:59:19.45: [ 1373]: USE error correction mode
Dec 12 14:59:19.45: [ 1373]: SEND file "docq/doc9.pdf;c0"
Dec 12 14:59:19.45: [ 1373]: USE A4 page width (215 mm)
Dec 12 14:59:19.45: [ 1373]: USE unlimited page length
Dec 12 14:59:19.45: [ 1373]: USE 3.85 line/mm
Dec 12 14:59:19.45: [ 1373]: USE 2-D MMR
Dec 12 14:59:19.45: [ 1373]: USE 0 ms/scanline
Dec 12 14:59:19.45: [ 1373]: SEND training at v.17 14400 bit/s
Dec 12 14:59:19.45: [ 1373]: <-- [9:AT+FRS=7\r]
Dec 12 14:59:19.62: [ 1373]: --> [2:OK]
Dec 12 14:59:19.62: [ 1373]: <-- [9:AT+FTH=3\r]
Dec 12 14:59:20.48: [ 1373]: --> [7:CONNECT]
Dec 12 14:59:20.49: [ 1373]: <-- HDLC<23:FF C0 C2 6A 42 04 D6 96 36 CA 
04 04 04 04 04 04 04 04 04 04 04 04 04>
Dec 12 14:59:20.49: [ 1373]: <-- data [23]
Dec 12 14:59:20.49: [ 1373]: <-- data [2]
Dec 12 14:59:20.51: [ 1373]: --> [7:CONNECT]
Dec 12 14:59:20.51: [ 1373]: <-- HDLC<7:FF C8 C1 00 44 1F 22>
Dec 12 14:59:20.51: [ 1373]: <-- data [7]
Dec 12 14:59:20.51: [ 1373]: <-- data [2]
Dec 12 14:59:21.64: [ 1373]: --> [2:OK]
Dec 12 14:59:21.64: [ 1373]: <-- [9:AT+FTS=7\r]
Dec 12 14:59:21.70: [ 1373]: --> [2:OK]
Dec 12 14:59:21.70: [ 1373]: <-- [11:AT+FTM=145\r]
Dec 12 14:59:21.72: [ 1373]: --> [7:CONNECT]
Dec 12 14:59:21.72: [ 1373]: DELAY 400 ms
Dec 12 14:59:22.12: [ 1373]: <-- data [1024]
Dec 12 14:59:22.12: [ 1373]: <-- data [1024]
Dec 12 14:59:22.12: [ 1373]: <-- data [652]
Dec 12 14:59:23.15: [ 1373]: <-- data [2]
Dec 12 14:59:24.85: [ 1373]: --> [2:OK]
Dec 12 14:59:24.85: [ 1373]: <-- [9:AT+FRH=3\r]
Dec 12 14:59:25.20: [ 1373]: --> [7:CONNECT]
Dec 12 14:59:26.42: [ 1373]: --> HDLC<5:FF C8 21 57 BE>
Dec 12 14:59:26.43: [ 1373]: --> [2:OK]
Dec 12 14:59:26.43: [ 1373]: TRAINING succeeded
Dec 12 14:59:26.43: [ 1373]: SEND begin page
Dec 12 14:59:26.43: [ 1373]: SEND send frame number 0
Dec 12 14:59:26.43: [ 1373]: SEND send frame number 1
Dec 12 14:59:26.43: [ 1373]: SEND send frame number 2
Dec 12 14:59:26.43: [ 1373]: SEND send frame number 3
Dec 12 14:59:26.43: [ 1373]: SEND send frame number 4
Dec 12 14:59:26.43: [ 1373]: SEND send frame number 5
Dec 12 14:59:26.43: [ 1373]: SEND send frame number 6
Dec 12 14:59:26.43: [ 1373]: SEND send frame number 7
Dec 12 14:59:26.43: [ 1373]: SEND send frame number 8
Dec 12 14:59:26.43: [ 1373]: SEND send frame number 9
Dec 12 14:59:26.43: [ 1373]: SEND send frame number 10
Dec 12 14:59:26.43: [ 1373]: SEND send frame number 11
Dec 12 14:59:26.43: [ 1373]: SEND send frame number 12
Dec 12 14:59:26.43: [ 1373]: SEND send frame number 13
Dec 12 14:59:26.43: [ 1373]: SEND send frame number 14
Dec 12 14:59:26.43: [ 1373]: SEND send frame number 15
Dec 12 14:59:26.43: [ 1373]: SEND send frame number 16
Dec 12 14:59:26.43: [ 1373]: <-- [9:AT+FRS=7\r]
Dec 12 14:59:26.61: [ 1373]: --> [2:OK]
Dec 12 14:59:26.61: [ 1373]: <-- [11:AT+FTM=146\r]
Dec 12 14:59:26.63: [ 1373]: --> [7:CONNECT]
Dec 12 14:59:26.63: [ 1373]: DELAY 400 ms
Dec 12 14:59:27.03: [ 1373]: <-- data [1032]
Dec 12 14:59:27.03: [ 1373]: <-- data [1029]
Dec 12 14:59:27.03: [ 1373]: <-- data [1034]
Dec 12 14:59:28.06: [ 1373]: <-- data [1032]
Dec 12 14:59:28.06: [ 1373]: <-- data [873]
Dec 12 14:59:29.25: [ 1373]: <-- data [2]
Dec 12 14:59:29.81: [ 1373]: --> [2:OK]
Dec 12 14:59:29.81: [ 1373]: <-- [9:AT+FTS=9\r]
Dec 12 14:59:29.90: [ 1373]: --> [2:OK]
Dec 12 14:59:29.90: [ 1373]: <-- [9:AT+FTH=3\r]
Dec 12 14:59:30.76: [ 1373]: --> [7:CONNECT]
Dec 12 14:59:30.76: [ 1373]: <-- HDLC<7:FF C8 FD F4 00 04 08>
Dec 12 14:59:30.76: [ 1373]: <-- data [8]
Dec 12 14:59:30.76: [ 1373]: <-- data [2]
Dec 12 14:59:31.19: [ 1373]: --> [2:OK]
Dec 12 14:59:31.19: [ 1373]: SEND send PPS (partial page signal)
Dec 12 14:59:31.19: [ 1373]: SEND send EOP (no more pages or documents)
Dec 12 14:59:31.19: [ 1373]: <-- [9:AT+FRH=3\r]
Dec 12 14:59:31.33: [ 1373]: --> [7:CONNECT]
Dec 12 14:59:32.55: [ 1373]: --> HDLC<5:FF C8 5F C8 E7>
Dec 12 14:59:32.56: [ 1373]: --> [2:OK]
Dec 12 14:59:32.56: [ 1373]: SEND recv DCN (disconnect)
Dec 12 14:59:32.56: [ 1373]: <-- [9:AT+FRS=7\r]
Dec 12 14:59:32.74: [ 1373]: --> [2:OK]
Dec 12 14:59:32.74: [ 1373]: COMREC invalid response received to PPS. {E146}
Dec 12 14:59:32.74: [ 1373]: SEND end page
Dec 12 14:59:32.74: [ 1373]: <-- [9:AT+FTH=3\r]
Dec 12 14:59:33.61: [ 1373]: --> [7:CONNECT]
Dec 12 14:59:33.61: [ 1373]: <-- HDLC<3:FF C8 DF>
Dec 12 14:59:33.61: [ 1373]: <-- data [3]
Dec 12 14:59:33.61: [ 1373]: <-- data [2]
Dec 12 14:59:33.93: [ 1373]: --> [2:OK]
Dec 12 14:59:33.93: [ 1373]: MODEM input buffering enabled
Dec 12 14:59:34.93: [ 1373]: <-- [5:ATH0\r]
Dec 12 14:59:35.72: [ 1373]: --> [2:OK]
Dec 12 14:59:35.72: [ 1373]: MODEM set DTR OFF
Dec 12 14:59:35.72: [ 1373]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5)
Dec 12 14:59:35.72: [ 1373]: SESSION END




____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*