Re: [hylafax-users] "COMREC invalid response.." persisting in HylaFAX+ 5.2.0

["Andrew Rinaldi" <andrew.rinaldi@xxxxxxxxxxxx>]

Hi Walter,

What make and model of modem are you using ?

Regards

Andrew Rinaldi
Mainpine Developer Support
USA +1 503 822 9944 | UK +44 8458 909438
andrew.rinaldi@xxxxxxxxxxxx | www.mainpine.com

-----Original Message-----
From: hylafax-users-bounce@xxxxxxxxxxx
[mailto:hylafax-users-bounce@xxxxxxxxxxx] On Behalf Of Walter Hop
Sent: 12 December 2007 14:39
To: hylafax-users@xxxxxxxxxxx
Subject: [hylafax-users] "COMREC invalid response.." persisting in HylaFAX+
5.2.0

Hi all,

as can be seen in my email at
http://www.hylafax.org/archive/2007-12/msg00074.php , I have had some
troubles faxing to certain destinations with HylaFAX 4.3.4.

As Lee promptly suggested, I have installed HylaFAX+ 5.2.0 from source now.

Unfortunately, the problem seems to persist. The first "known bad" 
remote set that I tried, still produces a "COMREC invalid response received
to PPS" error. The encoding is MMR.

The logfile from 5.2.0 is attached. I'm happy to debug!

Cheers!
Walter


__

Dec 12 14:59:02.53: [ 1373]: SESSION BEGIN 000000022 +3232xxxxxx Dec 12
14:59:02.53: [ 1373]: HylaFAX (tm) Version 5.2.0 Dec 12 14:59:02.53: [
1373]: SEND FAX: JOB 9 DEST 003232xxxxxx COMMID
000000022 DEVICE '/dev/cuad0' FROM 'System Administrator <root@test>' 
USER root
Dec 12 14:59:02.53: [ 1373]: STATE CHANGE: RUNNING -> SENDING Dec 12
14:59:02.53: [ 1373]: <-- [12:AT+FCLASS=1\r] Dec 12 14:59:02.55: [ 1373]:
--> [2:OK] Dec 12 14:59:02.55: [ 1373]: DIAL 003232xxxxxx Dec 12
14:59:02.55: [ 1373]: <-- [19:ATDT0,003232xxxxxx\r] Dec 12 14:59:17.33: [
1373]: --> [7:CONNECT] Dec 12 14:59:19.10: [ 1373]: --> HDLC<25:FF C0 02 1C
8A 04 04 04 04 04
04 04 04 04 04 04 04 04 04 04 04 04 04 94 EE> Dec 12 14:59:19.10: [ 1373]:
--> [2:OK] Dec 12 14:59:19.10: [ 1373]: REMOTE CSI "Q8"
Dec 12 14:59:19.10: [ 1373]: <-- [9:AT+FRH=3\r] Dec 12 14:59:19.11: [ 1373]:
--> [7:CONNECT] Dec 12 14:59:19.45: [ 1373]: --> HDLC<9:FF C8 01 00 77 1F 22
F8 96> Dec 12 14:59:19.45: [ 1373]: --> [2:OK] Dec 12 14:59:19.45: [ 1373]:
REMOTE best rate 14400 bit/s Dec 12 14:59:19.45: [ 1373]: REMOTE max A4 page
width (215 mm) Dec 12 14:59:19.45: [ 1373]: REMOTE max unlimited page length
Dec 12 14:59:19.45: [ 1373]: REMOTE best vres 7.7 line/mm Dec 12
14:59:19.45: [ 1373]: REMOTE format support: MH, MR, MMR Dec 12 14:59:19.45:
[ 1373]: REMOTE supports T.30 Annex A, 256-byte ECM Dec 12 14:59:19.45: [
1373]: REMOTE best 0 ms/scanline Dec 12 14:59:19.45: [ 1373]: USE 14400
bit/s Dec 12 14:59:19.45: [ 1373]: USE error correction mode Dec 12
14:59:19.45: [ 1373]: SEND file "docq/doc9.pdf;c0"
Dec 12 14:59:19.45: [ 1373]: USE A4 page width (215 mm) Dec 12 14:59:19.45:
[ 1373]: USE unlimited page length Dec 12 14:59:19.45: [ 1373]: USE 3.85
line/mm Dec 12 14:59:19.45: [ 1373]: USE 2-D MMR Dec 12 14:59:19.45: [
1373]: USE 0 ms/scanline Dec 12 14:59:19.45: [ 1373]: SEND training at v.17
14400 bit/s Dec 12 14:59:19.45: [ 1373]: <-- [9:AT+FRS=7\r] Dec 12
14:59:19.62: [ 1373]: --> [2:OK] Dec 12 14:59:19.62: [ 1373]: <--
[9:AT+FTH=3\r] Dec 12 14:59:20.48: [ 1373]: --> [7:CONNECT] Dec 12
14:59:20.49: [ 1373]: <-- HDLC<23:FF C0 C2 6A 42 04 D6 96 36 CA
04 04 04 04 04 04 04 04 04 04 04 04 04>
Dec 12 14:59:20.49: [ 1373]: <-- data [23] Dec 12 14:59:20.49: [ 1373]: <--
data [2] Dec 12 14:59:20.51: [ 1373]: --> [7:CONNECT] Dec 12 14:59:20.51: [
1373]: <-- HDLC<7:FF C8 C1 00 44 1F 22> Dec 12 14:59:20.51: [ 1373]: <--
data [7] Dec 12 14:59:20.51: [ 1373]: <-- data [2] Dec 12 14:59:21.64: [
1373]: --> [2:OK] Dec 12 14:59:21.64: [ 1373]: <-- [9:AT+FTS=7\r] Dec 12
14:59:21.70: [ 1373]: --> [2:OK] Dec 12 14:59:21.70: [ 1373]: <--
[11:AT+FTM=145\r] Dec 12 14:59:21.72: [ 1373]: --> [7:CONNECT] Dec 12
14:59:21.72: [ 1373]: DELAY 400 ms Dec 12 14:59:22.12: [ 1373]: <-- data
[1024] Dec 12 14:59:22.12: [ 1373]: <-- data [1024] Dec 12 14:59:22.12: [
1373]: <-- data [652] Dec 12 14:59:23.15: [ 1373]: <-- data [2] Dec 12
14:59:24.85: [ 1373]: --> [2:OK] Dec 12 14:59:24.85: [ 1373]: <--
[9:AT+FRH=3\r] Dec 12 14:59:25.20: [ 1373]: --> [7:CONNECT] Dec 12
14:59:26.42: [ 1373]: --> HDLC<5:FF C8 21 57 BE> Dec 12 14:59:26.43: [
1373]: --> [2:OK] Dec 12 14:59:26.43: [ 1373]: TRAINING succeeded Dec 12
14:59:26.43: [ 1373]: SEND begin page Dec 12 14:59:26.43: [ 1373]: SEND send
frame number 0 Dec 12 14:59:26.43: [ 1373]: SEND send frame number 1 Dec 12
14:59:26.43: [ 1373]: SEND send frame number 2 Dec 12 14:59:26.43: [ 1373]:
SEND send frame number 3 Dec 12 14:59:26.43: [ 1373]: SEND send frame number
4 Dec 12 14:59:26.43: [ 1373]: SEND send frame number 5 Dec 12 14:59:26.43:
[ 1373]: SEND send frame number 6 Dec 12 14:59:26.43: [ 1373]: SEND send
frame number 7 Dec 12 14:59:26.43: [ 1373]: SEND send frame number 8 Dec 12
14:59:26.43: [ 1373]: SEND send frame number 9 Dec 12 14:59:26.43: [ 1373]:
SEND send frame number 10 Dec 12 14:59:26.43: [ 1373]: SEND send frame
number 11 Dec 12 14:59:26.43: [ 1373]: SEND send frame number 12 Dec 12
14:59:26.43: [ 1373]: SEND send frame number 13 Dec 12 14:59:26.43: [ 1373]:
SEND send frame number 14 Dec 12 14:59:26.43: [ 1373]: SEND send frame
number 15 Dec 12 14:59:26.43: [ 1373]: SEND send frame number 16 Dec 12
14:59:26.43: [ 1373]: <-- [9:AT+FRS=7\r] Dec 12 14:59:26.61: [ 1373]: -->
[2:OK] Dec 12 14:59:26.61: [ 1373]: <-- [11:AT+FTM=146\r] Dec 12
14:59:26.63: [ 1373]: --> [7:CONNECT] Dec 12 14:59:26.63: [ 1373]: DELAY 400
ms Dec 12 14:59:27.03: [ 1373]: <-- data [1032] Dec 12 14:59:27.03: [ 1373]:
<-- data [1029] Dec 12 14:59:27.03: [ 1373]: <-- data [1034] Dec 12
14:59:28.06: [ 1373]: <-- data [1032] Dec 12 14:59:28.06: [ 1373]: <-- data
[873] Dec 12 14:59:29.25: [ 1373]: <-- data [2] Dec 12 14:59:29.81: [ 1373]:
--> [2:OK] Dec 12 14:59:29.81: [ 1373]: <-- [9:AT+FTS=9\r] Dec 12
14:59:29.90: [ 1373]: --> [2:OK] Dec 12 14:59:29.90: [ 1373]: <--
[9:AT+FTH=3\r] Dec 12 14:59:30.76: [ 1373]: --> [7:CONNECT] Dec 12
14:59:30.76: [ 1373]: <-- HDLC<7:FF C8 FD F4 00 04 08> Dec 12 14:59:30.76: [
1373]: <-- data [8] Dec 12 14:59:30.76: [ 1373]: <-- data [2] Dec 12
14:59:31.19: [ 1373]: --> [2:OK] Dec 12 14:59:31.19: [ 1373]: SEND send PPS
(partial page signal) Dec 12 14:59:31.19: [ 1373]: SEND send EOP (no more
pages or documents) Dec 12 14:59:31.19: [ 1373]: <-- [9:AT+FRH=3\r] Dec 12
14:59:31.33: [ 1373]: --> [7:CONNECT] Dec 12 14:59:32.55: [ 1373]: -->
HDLC<5:FF C8 5F C8 E7> Dec 12 14:59:32.56: [ 1373]: --> [2:OK] Dec 12
14:59:32.56: [ 1373]: SEND recv DCN (disconnect) Dec 12 14:59:32.56: [
1373]: <-- [9:AT+FRS=7\r] Dec 12 14:59:32.74: [ 1373]: --> [2:OK] Dec 12
14:59:32.74: [ 1373]: COMREC invalid response received to PPS. {E146} Dec 12
14:59:32.74: [ 1373]: SEND end page Dec 12 14:59:32.74: [ 1373]: <--
[9:AT+FTH=3\r] Dec 12 14:59:33.61: [ 1373]: --> [7:CONNECT] Dec 12
14:59:33.61: [ 1373]: <-- HDLC<3:FF C8 DF> Dec 12 14:59:33.61: [ 1373]: <--
data [3] Dec 12 14:59:33.61: [ 1373]: <-- data [2] Dec 12 14:59:33.93: [
1373]: --> [2:OK] Dec 12 14:59:33.93: [ 1373]: MODEM input buffering enabled
Dec 12 14:59:34.93: [ 1373]: <-- [5:ATH0\r] Dec 12 14:59:35.72: [ 1373]: -->
[2:OK] Dec 12 14:59:35.72: [ 1373]: MODEM set DTR OFF Dec 12 14:59:35.72: [
1373]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5) Dec 12 14:59:35.72: [
1373]: SESSION END




____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*

<<attachment: winmail.dat>>