Re: [hylafax-users] Multitech 5634ZBA USB and 5:ATH0\r

["Rob Molsbee" <robm@xxxxxxxxxxxx>]

Title: Re: [hylafax-users] Multitech 5634ZBA USB and 5:ATH0\r

 

Davide, here is my modem config file. Lee had mentioned using sendfax to test it and see whether it is a client problem. Sendfax will send a fax, even the faxes left over from the dozen or so clients I have tried that end up in the docq. It seems that the fax document reaches the server but something is keeping it on the server even after dialing the number and connecting to a remote fax machine. What is the greeting message (from the modem) and where might I find it? Thanks,

robm

CountryCode:            1
AreaCode:               262
FAXNumber:              12622552628
LongDistancePrefix:     1
InternationalPrefix:    011
DialStringRules:        etc/dialrules
ServerTracing:          1
SessionTracing:         11
RecvFileMode:           0600
LogFileMode:            0600
DeviceMode:             0600
RingsBeforeAnswer:      1
SpeakerVolume:          medium
GettyArgs:              "-h %l dx_%s"
LocalIdentifier:        "NothingSetup"
TagLineFont:            etc/lutRS18.pcf
TagLineFormat:          "From %%l|%c|Page %%P of %%T"
MaxRecvPages:           25
ModemType:              Class2
ModemRate:              19200
ModemFlowControl:       rtscts
ModemNoFlowCmd:         AT&K0
ModemSoftFlowCmd:       AT&K4
ModemHardFlowCmd:       AT&K3
ModemRecvFillOrder:     MSB2LSB         # classic MultiTech

Class2APQueryCmd:       none            # not available
Class2BUGCmd:           none            # not available
Class2NFLOCmd:          AT+FLO=0
Class2SFLOCmd:          AT+FLO=1
Class2HFLOCmd:          AT+FLO=2
Class2CQQueryCmd:       "!0-2"
Class2CQCmd:            AT+FCQ=1

---

From: hylafax-users-bounce@xxxxxxxxxxx on behalf of Davide Pagnin
Sent: Tue 10/30/2007 12:48 PM
To: hylafax-users@xxxxxxxxxxx
Subject: Re: [hylafax-users] Multitech 5634ZBA USB and 5:ATH0\r

Rob Molsbee ha scritto:
> We are running SLES9 and SLES10sp1 on several servers and thought
> hylafax might be worth a try. After trying an older Multitech serial
> modem (unsuccessfully) I gave the usb model a chance. "5:ATH0\r" an old
> friend from several posts is the result with
> hylafax-4.4.1-1suse100.i586.rpm (all other versions I tried -- same
> result) installed:

We have plenty of multitech ZBA 5634 USB running fine, so perhaps I
could be of help.

In particular I have 2 ZBA running with hylafax+ on suse linux
enterprise 9 SP3 configured in class 1.

Please, post to the mailing list the config file of your modem
(/var/spool/hylafax/etc/config.usb_ttyACM0 I suppose)

And the greetings message from the hylafax server in the log file.

Regards

Davide

> 
> Oct 29 08:29:30.96: [15359]: SESSION BEGIN 000000001 12626465696
> Oct 29 08:29:30.96: [15359]: HylaFAX (tm) Version 4.4.1
> Oct 29 08:29:30.96: [15359]: SEND FAX: JOB 1 DEST 12626465696 COMMID
> 000000001 DEVICE '/dev//usb/ttyACM0' FROM 'robm <robm@xxxxxxxxxxxx>'
> USER robm
> Oct 29 08:29:30.96: [15359]: <-- [9:AT+FLO=2\r]
> Oct 29 08:29:30.96: [15359]: --> [2:OK]
> Oct 29 08:29:30.96: [15359]: <-- [10:AT+FTBC=0\r]
> Oct 29 08:29:30.97: [15359]: --> [2:OK]
> Oct 29 08:29:30.97: [15359]: <-- [10:AT+FBOR=0\r]
> Oct 29 08:29:30.97: [15359]: --> [2:OK]
> Oct 29 08:29:30.97: [15359]: <-- [13:AT+FPHCTO=30\r]
> Oct 29 08:29:30.98: [15359]: --> [2:OK]
> Oct 29 08:29:30.98: [15359]: <-- [9:AT+FCQ=1\r]
> Oct 29 08:29:30.99: [15359]: --> [2:OK]
> Oct 29 08:29:30.99: [15359]: <-- [24:AT+FDCC=1,5,2,2,2,0,0,0\r]
> Oct 29 08:29:30.99: [15359]: --> [2:OK]
> Oct 29 08:29:30.99: [15359]: DIAL 12626465696
> Oct 29 08:29:30.99: [15359]: <-- [16:ATDT12626465696\r]
> Oct 29 08:29:51.09: [15359]: --> [5:+FCON]
> Oct 29 08:29:51.10: [15359]: --> [26:+FNSF:86 00 8C 00 00 C0 00]
> Oct 29 08:29:51.10: [15359]: REMOTE NSF "86 00 8C 00 00 C0 00"
> Oct 29 08:29:51.10: [15359]: NSF remote fax equipment: Samsung
> Oct 29 08:29:51.82: [15359]: --> [28:+FCSI:"2622640699          "]
> Oct 29 08:29:51.82: [15359]: REMOTE CSI "2622640699"
> Oct 29 08:29:52.18: [15359]: --> [21:+FDIS:1,5,0,2,1,0,0,2]
> Oct 29 08:29:52.18: [15359]: --> [2:OK]
> Oct 29 08:29:52.18: [15359]: REMOTE best rate 14400 bit/s
> Oct 29 08:29:52.18: [15359]: REMOTE max A4 page width (215 mm)
> Oct 29 08:29:52.18: [15359]: REMOTE max unlimited page length
> Oct 29 08:29:52.18: [15359]: REMOTE best vres 7.7 line/mm
> Oct 29 08:29:52.18: [15359]: REMOTE format support: MH, MR
> Oct 29 08:29:52.18: [15359]: REMOTE best 10 ms, 5 ms/scanline
> Oct 29 08:29:52.18: [15359]: USE 14400 bit/s
> Oct 29 08:29:52.18: [15359]: <-- [5:ATH0\r]
> Oct 29 08:29:52.23: [15359]: --> [2:OK]
> Oct 29 08:29:52.24: [15359]: SESSION END
> 
> On 4 different servers I have tried every possible combination (binary
> or compiled) and get the same result. With three weeks gone by it is
> time to ask for some help.  Any ideas will be most appreciated.
> 
> robm


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*