Re: [hylafax-users] Multitech 5634ZBA USB and 5:ATH0\r

[Davide Pagnin <pagnin@xxxxxxxxxxxxxx>]

Rob Molsbee ha scritto:
> We are running SLES9 and SLES10sp1 on several servers and thought 
> hylafax might be worth a try. After trying an older Multitech serial 
> modem (unsuccessfully) I gave the usb model a chance. "5:ATH0\r" an old 
> friend from several posts is the result with 
> hylafax-4.4.1-1suse100.i586.rpm (all other versions I tried -- same 
> result) installed:

We have plenty of multitech ZBA 5634 USB running fine, so perhaps I 
could be of help.

In particular I have 2 ZBA running with hylafax+ on suse linux 
enterprise 9 SP3 configured in class 1.

Please, post to the mailing list the config file of your modem
(/var/spool/hylafax/etc/config.usb_ttyACM0 I suppose)

And the greetings message from the hylafax server in the log file.

Regards

Davide

>  
> Oct 29 08:29:30.96: [15359]: SESSION BEGIN 000000001 12626465696
> Oct 29 08:29:30.96: [15359]: HylaFAX (tm) Version 4.4.1
> Oct 29 08:29:30.96: [15359]: SEND FAX: JOB 1 DEST 12626465696 COMMID 
> 000000001 DEVICE '/dev//usb/ttyACM0' FROM 'robm <robm@xxxxxxxxxxxx>' 
> USER robm
> Oct 29 08:29:30.96: [15359]: <-- [9:AT+FLO=2\r]
> Oct 29 08:29:30.96: [15359]: --> [2:OK]
> Oct 29 08:29:30.96: [15359]: <-- [10:AT+FTBC=0\r]
> Oct 29 08:29:30.97: [15359]: --> [2:OK]
> Oct 29 08:29:30.97: [15359]: <-- [10:AT+FBOR=0\r]
> Oct 29 08:29:30.97: [15359]: --> [2:OK]
> Oct 29 08:29:30.97: [15359]: <-- [13:AT+FPHCTO=30\r]
> Oct 29 08:29:30.98: [15359]: --> [2:OK]
> Oct 29 08:29:30.98: [15359]: <-- [9:AT+FCQ=1\r]
> Oct 29 08:29:30.99: [15359]: --> [2:OK]
> Oct 29 08:29:30.99: [15359]: <-- [24:AT+FDCC=1,5,2,2,2,0,0,0\r]
> Oct 29 08:29:30.99: [15359]: --> [2:OK]
> Oct 29 08:29:30.99: [15359]: DIAL 12626465696
> Oct 29 08:29:30.99: [15359]: <-- [16:ATDT12626465696\r]
> Oct 29 08:29:51.09: [15359]: --> [5:+FCON]
> Oct 29 08:29:51.10: [15359]: --> [26:+FNSF:86 00 8C 00 00 C0 00]
> Oct 29 08:29:51.10: [15359]: REMOTE NSF "86 00 8C 00 00 C0 00"
> Oct 29 08:29:51.10: [15359]: NSF remote fax equipment: Samsung
> Oct 29 08:29:51.82: [15359]: --> [28:+FCSI:"2622640699          "]
> Oct 29 08:29:51.82: [15359]: REMOTE CSI "2622640699"
> Oct 29 08:29:52.18: [15359]: --> [21:+FDIS:1,5,0,2,1,0,0,2]
> Oct 29 08:29:52.18: [15359]: --> [2:OK]
> Oct 29 08:29:52.18: [15359]: REMOTE best rate 14400 bit/s
> Oct 29 08:29:52.18: [15359]: REMOTE max A4 page width (215 mm)
> Oct 29 08:29:52.18: [15359]: REMOTE max unlimited page length
> Oct 29 08:29:52.18: [15359]: REMOTE best vres 7.7 line/mm
> Oct 29 08:29:52.18: [15359]: REMOTE format support: MH, MR
> Oct 29 08:29:52.18: [15359]: REMOTE best 10 ms, 5 ms/scanline
> Oct 29 08:29:52.18: [15359]: USE 14400 bit/s
> Oct 29 08:29:52.18: [15359]: <-- [5:ATH0\r]
> Oct 29 08:29:52.23: [15359]: --> [2:OK]
> Oct 29 08:29:52.24: [15359]: SESSION END
>  
> On 4 different servers I have tried every possible combination (binary 
> or compiled) and get the same result. With three weeks gone by it is 
> time to ask for some help.  Any ideas will be most appreciated.
>  
> robm


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*