Re: [hylafax-users] ERR No receiver protocol (T.30 T1 timeout)

[Jan Kalcic <jandot@xxxxxxxxxxxxxx>]

Lee Howard wrote:
> Jan Kalcic wrote:
>
>> Aug 31 19:10:33.98: [ 8000]: <-- [18:ATX3DT00000000000\r]
>> Aug 31 19:10:51.23: [ 8000]: --> [7:CONNECT]
>> Aug 31 19:10:51.31: [ 8000]: --> [3:FE 10 03]
>> Aug 31 19:10:51.31: [ 8000]: --> [5:ERROR]
>> Aug 31 19:10:51.31: [ 8000]: MODEM Command error
>> Aug 31 19:10:51.31: [ 8000]: FCS error
>> Aug 31 19:10:51.31: [ 8000]: DELAY 70 ms
>> Aug 31 19:10:51.38: [ 8000]: <-- [9:AT+FTH=3\r]
>> Aug 31 19:10:51.43: [ 8000]: --> [7:CONNECT]
>> Aug 31 19:10:51.43: [ 8000]: <-- HDLC<3:FF C8 D8>
>> Aug 31 19:10:51.43: [ 8000]: <-- data [3]
>> Aug 31 19:10:51.43: [ 8000]: <-- data [2]
>> Aug 31 19:10:52.73: [ 8000]: --> [2:OK]
>> Aug 31 19:10:52.73: [ 8000]: SEND send CRP (command repeat)
>> Aug 31 19:10:52.73: [ 8000]: <-- [9:AT+FRH=3\r]
>> Aug 31 19:10:59.74: [ 8000]: --> [0:]
>> Aug 31 19:10:59.74: [ 8000]: MODEM <Empty line>
>> Aug 31 19:10:59.74: [ 8000]: MODEM TIMEOUT: waiting for v.21 carrier
>> Aug 31 19:10:59.74: [ 8000]: <-- data [1]
>> Aug 31 19:10:59.79: [ 8000]: --> [2:OK]
>>
>
> Well, from this I would guess that the fax features on this modem are
> worthless.  Does this happen only when faxing to a specific
> destination?  Or does this happen when faxing to all destinations?
>
> Thanks,
>
> Lee.
>
>
Unfortunately my guess was right then. :-( Actually I tried with  two
different destinations only and it didn't work on both. I could try
again but I would say that this is enough to make me put aside this
modem and try with a different one. The luck is that I bought only one
of this modem even if I need almost a dozen of them. The good thing is
that at least we can now update the documentation with an advice against
this model.

The words of Andrew Rinaldi is appreciated as any other advice will come
in the list. What I basically need is a cheap and easily catchable modem
available on the web. No particular performance are required.

Thanks to all,

Jan


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*