[hylafax-users] ERR No receiver protocol (T.30 T1 timeout)

[Jan Kalcic <jandot@xxxxxxxxxxxxxx>]

Hi All,

anyone experienced problems with external modem fax Hamlet HV92KX2?

The error in subject is driving me crazy. I can't find any solution and
I'm about to start to think it's a modem issue. The config.ttyS0 is the
following:

#CountryCode:            ""
#AreaCode:               ""
FAXNumber:              0000000000
#LongDistancePrefix:     ""
#InternationalPrefix:    ""
DialStringRules:        etc/dialrules
ServerTracing:          1
SessionTracing:         0xFFF
RecvFileMode:           0600
LogFileMode:            0600
DeviceMode:             0600
RingsBeforeAnswer:      1
SpeakerVolume:          "off"
GettyArgs:              "-h %l dx_%s"
LocalIdentifier:        "Tecnocasa - Studio Carate"
LogFacility:            local0
TagLineFont:            etc/lutRS18.pcf
TagLineFormat:          "From %%l|%c|Page %%P of %%T"
MaxRecvPages:           25
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType:              Class1          # use this to supply a hint
ModemRate:              19200           # rate for DCE-DTE communication
ModemFlowControl:       rtscts          # default
#
ModemNoFlowCmd:         AT&K0           # setup no flow control
ModemHardFlowCmd:       AT&K3           # setup hardware flow control
ModemSoftFlowCmd:       AT&K4           # setup software flow control
ModemSetupDTRCmd:       AT&D2           # setup so DTR drop resets modem
ModemSetupDCDCmd:       AT&C1           # setup so DCD reflects carrier
(or not)
#
ModemMfrQueryCmd:       !Rockwell
ModemModelQueryCmd:     !RC288DPi
ModemRevQueryCmd:       ATI3            # product information
#
# #######################################
# "X3" addes to avoid "No local dialtone" error #
########################################
ModemDialCmd:           ATX3DT%s                # T for tone dialing


Here the log:

Aug 31 15:21:18 plutone FaxQueuer[4258]: SUBMIT JOB 29
Aug 31 15:21:18 plutone FaxQueuer[4258]: JOB 29 (suspended dest  pri 127
tts 0:00 killtime 2:59:00): CREATE
Aug 31 15:21:18 plutone FaxQueuer[4258]: JOB 29 (ready dest +00000000000
pri 127 tts 0:00 killtime 2:59:00): READY
Aug 31 15:21:18 plutone FaxQueuer[4258]: JOB 29 (ready dest +00000000000
pri 127 tts 0:00 killtime 2:59:00): PROCESS
Aug 31 15:21:18 plutone HylaFAX[5202]: <--- 200 Job 29 submitted.
Aug 31 15:21:19 plutone FaxQueuer[4258]: JOB 29 (ready dest +00000000000
pri 127 tts 0:00 killtime 2:58:59): ADDING JOB 27 TO BATCH
Aug 31 15:21:19 plutone FaxQueuer[4258]: JOB 29 (ready dest +00000000000
pri 127 tts 0:00 killtime 2:58:59): ADDING JOB 24 TO BATCH
Aug 31 15:21:19 plutone FaxQueuer[4258]: JOB 29 (ready dest +00000000000
pri 127 tts 0:00 killtime 2:58:59): ADDING JOB 25 TO BATCH
Aug 31 15:21:19 plutone FaxQueuer[4258]: JOB 29 (ready dest +00000000000
pri 127 tts 0:00 killtime 2:58:59): ADDING JOB 26 TO BATCH
Aug 31 15:21:19 plutone FaxQueuer[4258]: JOB 29 (active dest
+00000000000 pri 127 tts 0:00 killtime 2:58:59): ACTIVE
Aug 31 15:21:19 plutone FaxQueuer[4258]: JOB 29 (active dest
+00000000000 pri 127 tts 0:00 killtime 2:58:59): PREPARE START
Aug 31 15:21:19 plutone FaxQueuer[5207]: JOB 29 (active dest
+00000000000 pri 127 tts 0:00 killtime 2:58:59): CONVERT DOCUMENT:
bin/ps2fax -o docq/doc35.ps;c1 -r 196 -w 1728 -l 297 -m 4294967295 -U -3
docq/doc35.ps.29
Aug 31 15:21:19 plutone FaxQueuer[4258]: NOTIFY exit status: 0177400 (5205)
Aug 31 15:21:19 plutone FaxGetty[4736]: LOCKWAIT
Aug 31 15:21:19 plutone FaxQueuer[4258]: JOB 29 (active dest
+00000000000 pri 127 tts 0:00 killtime 2:58:59): PREPARE DONE
Aug 31 15:21:19 plutone FaxQueuer[4258]: JOB 27 (active dest
+00000000000 pri 123 tts 0:00 killtime 2:48:48): ACTIVE
Aug 31 15:21:19 plutone FaxQueuer[4258]: JOB 24 (active dest
+00000000000 pri 123 tts 0:00 killtime 2:41:32): ACTIVE
Aug 31 15:21:19 plutone FaxQueuer[4258]: JOB 25 (active dest
+00000000000 pri 123 tts 0:00 killtime 2:44:49): ACTIVE
Aug 31 15:21:19 plutone FaxQueuer[4258]: JOB 26 (active dest
+00000000000 pri 123 tts 0:00 killtime 2:45:42): ACTIVE
Aug 31 15:21:19 plutone FaxQueuer[4258]: JOB 29 (active dest
+00000000000 pri 127 tts 0:00 killtime 2:58:59): CMD START
/usr/sbin/faxsend -m ttyS0 sendq/q29 sendq/q27 sendq/q24 sendq/q25
sendq/q26 (PID 5214)
Aug 31 15:21:29 plutone FaxSend[5214]: MODEM ROCKWELL
RC288DPi/ACF3_V1.702-V90_P21_FSH
Aug 31 15:21:29 plutone FaxSend[5214]: SEND FAX: JOB 29 DEST 00000000000
COMMID 000000054 DEVICE '/dev/ttyS0' FROM 'root <root@xxxxxxxxxxxx>'
USER root
Aug 31 15:22:30 plutone FaxSend[5214]: SEND FAILED: JOB 29 DEST
00000000000 ERR No receiver protocol (T.30 T1 timeout) {E126}
Aug 31 15:22:34 plutone FaxQueuer[4258]: JOB 29 (active dest
+00000000000 pri 127 tts 0:00 killtime 2:57:44): CMD DONE: exit status 0
Aug 31 15:22:34 plutone FaxQueuer[4258]: JOB 29 (sleeping dest
+00000000000 pri 126 tts 0:00 killtime 2:57:44): SEND INCOMPLETE:
requeue for 0:56; No receiver protocol (T.30 T1 timeout)
Aug 31 15:22:34 plutone FaxQueuer[4258]: JOB 29 (sleeping dest
+00000000000 pri 126 tts 0:56 killtime 2:57:44): SLEEP FOR 0:56


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*