Re: [hylafax-users] ERR No receiver protocol (T.30 T1 timeout)

[Jan Kalcic <jandot@xxxxxxxxxxxxxx>]

Lee Howard wrote:
> Jan Kalcic wrote:
>
>> Aug 31 16:17:25.21: [ 6377]: <-- [18:ATX3DT00000000000\r]
>> Aug 31 16:17:42.68: [ 6377]: --> [7:CONNECT]
>> Aug 31 16:17:42.73: [ 6377]: --> [3:BE 10 03]
>> Aug 31 16:17:42.73: [ 6377]: --> [5:ERROR]
>> Aug 31 16:17:42.73: [ 6377]: MODEM Command error
>> Aug 31 16:17:42.73: [ 6377]: FCS error
>> Aug 31 16:17:42.73: [ 6377]: <-- [10:AT+FRS=21\r]
>> Aug 31 16:18:12.73: [ 6377]: MODEM TIMEOUT: reading line from modem
>> Aug 31 16:18:12.73: [ 6377]: MODEM <Timeout>
>> Aug 31 16:18:12.73: [ 6377]: Failure to receive silence (synchronization
>> failure). {E100}
>> Aug 31 16:18:12.73: [ 6377]: <-- data [1]
>> Aug 31 16:18:12.80: [ 6377]: --> [2:OK]
>> Aug 31 16:18:12.80: [ 6377]: <-- [9:AT+FRS=7\r]
>> Aug 31 16:18:12.92: [ 6377]: --> [2:OK]
>> Aug 31 16:18:12.92: [ 6377]: <-- [9:AT+FRH=3\r]
>> Aug 31 16:18:19.92: [ 6377]: --> [0:]
>> Aug 31 16:18:19.92: [ 6377]: MODEM <Empty line>
>> Aug 31 16:18:19.92: [ 6377]: MODEM TIMEOUT: waiting for v.21 carrier
>> Aug 31 16:18:19.92: [ 6377]: <-- data [1]
>> Aug 31 16:18:19.98: [ 6377]: --> [2:OK]
>>
>
> Well, from this we could wonder, perhaps, if the fax features on this
> modem even work at all.  Notice that AT+FRS=7 seems to go okay, but
> the AT+FRS=21 does not.  So the modem seems to support +FRS in some
> shape or form, but not well.
>
> Let's start by disabling +FRS/+FTS altogether.  Please put this into
> your modem configuration file and try again:
>
>  Class1PPMWaitCmd:       "<delay:7>"
>  Class1TCFWaitCmd:       "<delay:7>"
>  Class1EOPWaitCmd:       "<delay:9>"
>  Class1SwitchingCmd:     "<delay:7>"
>
> Then send the resulting session log.
>
> Thanks,
>
> Lee.
>
>
Here we are. Thanks to you.

Aug 31 19:10:33.96: [ 8000]: SESSION BEGIN 000000073 +00000000000
Aug 31 19:10:33.96: [ 8000]: HylaFAX (tm) Version 5.1.8
Aug 31 19:10:33.96: [ 8000]: SEND FAX: JOB 31 DEST 00000000000 COMMID
000000073 DEVICE '/dev/ttyS0' FROM 'root <root@xxxxxxxxxxxx>' USER root
Aug 31 19:10:33.96: [ 8000]: STATE CHANGE: RUNNING -> SENDING
Aug 31 19:10:33.96: [ 8000]: <-- [12:AT+FCLASS=1\r]
Aug 31 19:10:33.98: [ 8000]: --> [2:OK]
Aug 31 19:10:33.98: [ 8000]: DIAL 00000000000
Aug 31 19:10:33.98: [ 8000]: <-- [18:ATX3DT00000000000\r]
Aug 31 19:10:51.23: [ 8000]: --> [7:CONNECT]
Aug 31 19:10:51.31: [ 8000]: --> [3:FE 10 03]
Aug 31 19:10:51.31: [ 8000]: --> [5:ERROR]
Aug 31 19:10:51.31: [ 8000]: MODEM Command error
Aug 31 19:10:51.31: [ 8000]: FCS error
Aug 31 19:10:51.31: [ 8000]: DELAY 70 ms
Aug 31 19:10:51.38: [ 8000]: <-- [9:AT+FTH=3\r]
Aug 31 19:10:51.43: [ 8000]: --> [7:CONNECT]
Aug 31 19:10:51.43: [ 8000]: <-- HDLC<3:FF C8 D8>
Aug 31 19:10:51.43: [ 8000]: <-- data [3]
Aug 31 19:10:51.43: [ 8000]: <-- data [2]
Aug 31 19:10:52.73: [ 8000]: --> [2:OK]
Aug 31 19:10:52.73: [ 8000]: SEND send CRP (command repeat)
Aug 31 19:10:52.73: [ 8000]: <-- [9:AT+FRH=3\r]
Aug 31 19:10:59.74: [ 8000]: --> [0:]
Aug 31 19:10:59.74: [ 8000]: MODEM <Empty line>
Aug 31 19:10:59.74: [ 8000]: MODEM TIMEOUT: waiting for v.21 carrier
Aug 31 19:10:59.74: [ 8000]: <-- data [1]
Aug 31 19:10:59.79: [ 8000]: --> [2:OK]
Aug 31 19:10:59.79: [ 8000]: DELAY 70 ms
Aug 31 19:10:59.86: [ 8000]: <-- [9:AT+FRH=3\r]
Aug 31 19:11:06.86: [ 8000]: --> [0:]
Aug 31 19:11:06.86: [ 8000]: MODEM <Empty line>
Aug 31 19:11:06.86: [ 8000]: MODEM TIMEOUT: waiting for v.21 carrier
Aug 31 19:11:06.86: [ 8000]: <-- data [1]
Aug 31 19:11:06.92: [ 8000]: --> [2:OK]
Aug 31 19:11:06.92: [ 8000]: DELAY 70 ms
Aug 31 19:11:06.99: [ 8000]: <-- [9:AT+FRH=3\r]
Aug 31 19:11:13.99: [ 8000]: --> [0:]
Aug 31 19:11:13.99: [ 8000]: MODEM <Empty line>
Aug 31 19:11:13.99: [ 8000]: MODEM TIMEOUT: waiting for v.21 carrier
Aug 31 19:11:13.99: [ 8000]: <-- data [1]
Aug 31 19:11:14.05: [ 8000]: --> [2:OK]
Aug 31 19:11:14.05: [ 8000]: DELAY 70 ms
Aug 31 19:11:14.12: [ 8000]: <-- [9:AT+FRH=3\r]
Aug 31 19:11:21.12: [ 8000]: --> [0:]
Aug 31 19:11:21.12: [ 8000]: MODEM <Empty line>
Aug 31 19:11:21.12: [ 8000]: MODEM TIMEOUT: waiting for v.21 carrier
Aug 31 19:11:21.12: [ 8000]: <-- data [1]
Aug 31 19:11:21.18: [ 8000]: --> [2:OK]
Aug 31 19:11:21.18: [ 8000]: DELAY 70 ms
Aug 31 19:11:21.25: [ 8000]: <-- [9:AT+FRH=3\r]
Aug 31 19:11:28.25: [ 8000]: --> [0:]
Aug 31 19:11:28.25: [ 8000]: MODEM <Empty line>
Aug 31 19:11:28.25: [ 8000]: MODEM TIMEOUT: waiting for v.21 carrier
Aug 31 19:11:28.25: [ 8000]: <-- data [1]
Aug 31 19:11:28.31: [ 8000]: --> [2:OK]
Aug 31 19:11:28.31: [ 8000]: DELAY 70 ms
Aug 31 19:11:28.38: [ 8000]: <-- [9:AT+FRH=3\r]
Aug 31 19:11:35.39: [ 8000]: --> [0:]
Aug 31 19:11:35.39: [ 8000]: MODEM <Empty line>
Aug 31 19:11:35.39: [ 8000]: MODEM TIMEOUT: waiting for v.21 carrier
Aug 31 19:11:35.39: [ 8000]: <-- data [1]
Aug 31 19:11:35.44: [ 8000]: --> [2:OK]
Aug 31 19:11:35.44: [ 8000]: No receiver protocol (T.30 T1 timeout) {E126}
Aug 31 19:11:35.44: [ 8000]: SEND FAILED: JOB 31 DEST 00000000000 ERR No
receiver protocol (T.30 T1 timeout) {E126}
Aug 31 19:11:35.44: [ 8000]: DELAY 70 ms
Aug 31 19:11:35.51: [ 8000]: <-- [9:AT+FTH=3\r]
Aug 31 19:11:35.55: [ 8000]: --> [7:CONNECT]
Aug 31 19:11:35.55: [ 8000]: <-- HDLC<3:FF C8 DF>
Aug 31 19:11:35.55: [ 8000]: <-- data [3]
Aug 31 19:11:35.55: [ 8000]: <-- data [2]
Aug 31 19:11:36.85: [ 8000]: --> [2:OK]
Aug 31 19:11:36.85: [ 8000]: MODEM input buffering enabled
Aug 31 19:11:37.85: [ 8000]: <-- [5:ATH0\r]
Aug 31 19:11:38.77: [ 8000]: --> [2:OK]
Aug 31 19:11:38.77: [ 8000]: MODEM set DTR OFF
Aug 31 19:11:38.77: [ 8000]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5)
Aug 31 19:11:38.77: [ 8000]: SESSION END


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*