Re: [hylafax-users] ERR No receiver protocol (T.30 T1 timeout)

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

Jan Kalcic wrote:

> Aug 31 19:10:33.98: [ 8000]: <-- [18:ATX3DT00000000000\r]
> Aug 31 19:10:51.23: [ 8000]: --> [7:CONNECT]
> Aug 31 19:10:51.31: [ 8000]: --> [3:FE 10 03]
> Aug 31 19:10:51.31: [ 8000]: --> [5:ERROR]
> Aug 31 19:10:51.31: [ 8000]: MODEM Command error
> Aug 31 19:10:51.31: [ 8000]: FCS error
> Aug 31 19:10:51.31: [ 8000]: DELAY 70 ms
> Aug 31 19:10:51.38: [ 8000]: <-- [9:AT+FTH=3\r]
> Aug 31 19:10:51.43: [ 8000]: --> [7:CONNECT]
> Aug 31 19:10:51.43: [ 8000]: <-- HDLC<3:FF C8 D8>
> Aug 31 19:10:51.43: [ 8000]: <-- data [3]
> Aug 31 19:10:51.43: [ 8000]: <-- data [2]
> Aug 31 19:10:52.73: [ 8000]: --> [2:OK]
> Aug 31 19:10:52.73: [ 8000]: SEND send CRP (command repeat)
> Aug 31 19:10:52.73: [ 8000]: <-- [9:AT+FRH=3\r]
> Aug 31 19:10:59.74: [ 8000]: --> [0:]
> Aug 31 19:10:59.74: [ 8000]: MODEM <Empty line>
> Aug 31 19:10:59.74: [ 8000]: MODEM TIMEOUT: waiting for v.21 carrier
> Aug 31 19:10:59.74: [ 8000]: <-- data [1]
> Aug 31 19:10:59.79: [ 8000]: --> [2:OK]

Well, from this I would guess that the fax features on this modem are 
worthless.  Does this happen only when faxing to a specific 
destination?  Or does this happen when faxing to all destinations?

Thanks,

Lee.


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*