[hylafax-users] not under standing the these logs

["raviprakash sunkara" <sunkara.raviprakash.feb14@xxxxxxxxx>]

Hello users 

I;m Bew buddy to HylaFAX, 
Am using IAXmodem for HylaFAX for Asterisk 
in the log am seeing these ...

Jun 27 19:52:35.10: [13277]: SEND FAX: JOB 35 DEST 039999 COMMID 000000171 DEVICE '/dev/ttyIAX' FROM 'root <
root@xxxxxxxxxxxxxxx>' USER root
Jun 27 19:52:35.10: [13277]: STATE CHANGE: RUNNING -> SENDING
Jun 27 19:52:35.10: [13277]: <-- [12:AT+FCLASS=1\r]
Jun 27 19:52:
35.10: [13277]: --> [2:OK]
Jun 27 19:52:35.10: [13277]: MODEM set XON/XOFF/FLUSH: input ignored, output disabled
Jun 27 19:52:35.10: [13277]: DIAL 039999
Jun 27 19:52:35.10
: [13277]: <-- [11:ATDT039999\r]
Jun 27 19:52:45.53: [13277]: --> [10:NO CARRIER]
Jun 27 19:52:45.53: [13277]: SEND FAILED: JOB 35 DEST 039999 ERR No carrier detected
Jun 27 19:52:45.53: [13277]: <-- [5:ATH0\r]
Jun 27 19:52:45.53: [13277]: --> [2:OK]
Jun 27 19:52:45.53: [13277]: MODEM set DTR OFF
Jun 27 19:52:45.53: [13277]: 
MODEM set baud rate: 0 baud (flow control unchanged)
Jun 27 19:52:45.53: [13277]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5)
Jun 27 19:52:
45.53: [13277]: SESSION END

This is how Am testing  mention in below 

winprinltHyalfax ----> hylafax ---> IAXmodem --> asterisk ---> ATA --> fax m/c 




-- 
Thanks &Regards
Ravi Prakash Sunkara