[hylafax-users] Failure to train remote modem

["Hector Lucenti" <hector@xxxxxxxxxx>]

Title: email sig

Hi,

 

I am using Fedora Core 4.

 

My Hylafax was working flawless for more than 6 months.

 

Two days ago all my faxes are failing.

 

Most of the errors are:

 

Failure to train remote modem.

 

 

I have tried 3 diff. modems and I get the same.

 

I have changed phone lines and I get the same.

 

I can't figure this one out.

 

Help will be appreciated.

 

Here is the log:

 

May 10 12:08:40.14: [15578]: SESSION BEGIN 000005553 61299762711
May 10 12:08:40.14: [15578]: HylaFAX (tm) Version 4.2.5
May 10 12:08:40.14: [15578]: SEND FAX: JOB 4336 DEST 99762711 COMMID 000005553 DEVICE '/dev/ttyS0' FROM 'root <root@xxxxxxxxxxxxxxxxx>' USER root
May 10 12:08:40.14: [15578]: <-- [12:AT+FCLASS=1\r]
May 10 12:08:40.15: [15578]: --> [2:OK]
May 10 12:08:40.16: [15578]: DIAL 99762711
May 10 12:08:40.16: [15578]: <-- [13:ATDT99762711\r]
May 10 12:09:05.63: [15578]: --> [7:CONNECT]
May 10 12:09:06.75: [15578]: --> [5:ERROR]
May 10 12:09:06.75: [15578]: MODEM Command error
May 10 12:09:06.75: [15578]: FCS error
May 10 12:09:06.75: [15578]: <-- [9:AT+FRS=7\r]
May 10 12:09:06.87: [15578]: --> [2:OK]
May 10 12:09:06.87: [15578]: <-- [9:AT+FTH=3\r]
May 10 12:09:06.92: [15578]: --> [7:CONNECT]
May 10 12:09:06.92: [15578]: <-- data [3]
May 10 12:09:06.92: [15578]: <-- data [2]
May 10 12:09:08.24: [15578]: --> [2:OK]
May 10 12:09:08.24: [15578]: SEND send CRP (command repeat)
May 10 12:09:08.24: [15578]: <-- [9:AT+FRH=3\r]
May 10 12:09:11.80: [15578]: --> [7:CONNECT]
May 10 12:09:13.68: [15578]: --> [2:OK]
May 10 12:09:13.68: [15578]: REMOTE NSF "00 00 11 80 00 80 49 10 43 4F 4E 4E 45 43 54 49 4F 4E 53 20 20 20 20 20 00 00 01 80 80 C0 06 01 01 01 01"
May 10 12:09:13.68: [15578]: NSF remote fax equipment: Canon Fax B100
May 10 12:09:13.68: [15578]: NSF remote station ID: "CONNECTIONS     "
May 10 12:09:13.68: [15578]: <-- [9:AT+FRH=3\r]
May 10 12:09:13.70: [15578]: --> [7:CONNECT]
May 10 12:09:14.40: [15578]: --> [2:OK]
May 10 12:09:14.40: [15578]: REMOTE CSI "0299762711"
May 10 12:09:14.40: [15578]: <-- [9:AT+FRH=3\r]
May 10 12:09:14.41: [15578]: --> [7:CONNECT]
May 10 12:09:14.69: [15578]: --> [2:OK]
May 10 12:09:14.69: [15578]: REMOTE best rate 9600 bit/s
May 10 12:09:14.69: [15578]: REMOTE max A4 page width (215 mm)
May 10 12:09:14.69: [15578]: REMOTE max unlimited page length
May 10 12:09:14.69: [15578]: REMOTE best vres 7.7 line/mm
May 10 12:09:14.69: [15578]: REMOTE format support: MH, MR, MMR
May 10 12:09:14.69: [15578]: REMOTE supports T.30 Annex A, 256-byte ECM
May 10 12:09:14.69: [15578]: REMOTE best 20 ms/scanline
May 10 12:09:14.69: [15578]: USE 9600 bit/s
May 10 12:09:14.69: [15578]: USE error correction mode
May 10 12:09:14.69: [15578]: SEND file "docq/doc4278.ps;30"
May 10 12:09:14.69: [15578]: USE A4 page width (215 mm)
May 10 12:09:14.69: [15578]: USE unlimited page length
May 10 12:09:14.69: [15578]: USE 3.85 line/mm
May 10 12:09:14.69: [15578]: USE 2-D MMR
May 10 12:09:14.69: [15578]: USE 0 ms/scanline
May 10 12:09:14.69: [15578]: SEND training at v.29 9600 bit/s
May 10 12:09:14.69: [15578]: <-- [9:AT+FRS=7\r]
May 10 12:09:14.81: [15578]: --> [2:OK]
May 10 12:09:14.81: [15578]: <-- [9:AT+FTH=3\r]
May 10 12:09:14.86: [15578]: --> [7:CONNECT]
May 10 12:09:14.86: [15578]: <-- data [23]
May 10 12:09:14.86: [15578]: <-- data [2]
May 10 12:09:16.64: [15578]: --> [7:CONNECT]
May 10 12:09:16.64: [15578]: <-- data [7]
May 10 12:09:16.64: [15578]: <-- data [2]
May 10 12:09:17.11: [15578]: --> [2:OK]
May 10 12:09:17.11: [15578]: <-- [9:AT+FTS=7\r]
May 10 12:09:17.20: [15578]: --> [2:OK]
May 10 12:09:17.20: [15578]: <-- [10:AT+FTM=96\r]
May 10 12:09:17.26: [15578]: --> [7:CONNECT]
May 10 12:09:17.26: [15578]: <-- data [1024]
May 10 12:09:17.26: [15578]: <-- data [776]
May 10 12:09:17.26: [15578]: <-- data [2]
May 10 12:09:19.21: [15578]: --> [2:OK]
May 10 12:09:19.21: [15578]: <-- [9:AT+FRH=3\r]
May 10 12:09:22.31: [15578]: --> [0:]
May 10 12:09:22.31: [15578]: MODEM <Empty line>
May 10 12:09:22.31: [15578]: <-- data [1]
May 10 12:09:22.36: [15578]: --> [2:OK]
May 10 12:09:22.36: [15578]: DELAY 1500 ms
May 10 12:09:23.86: [15578]: SEND training at v.29 7200 bit/s
May 10 12:09:23.86: [15578]: <-- [9:AT+FRS=7\r]
May 10 12:09:23.98: [15578]: --> [2:OK]
May 10 12:09:23.98: [15578]: <-- [9:AT+FTH=3\r]
May 10 12:09:24.03: [15578]: --> [7:CONNECT]
May 10 12:09:24.03: [15578]: <-- data [23]
May 10 12:09:24.03: [15578]: <-- data [2]
May 10 12:09:25.82: [15578]: --> [7:CONNECT]
May 10 12:09:25.82: [15578]: <-- data [7]
May 10 12:09:25.82: [15578]: <-- data [2]
May 10 12:09:26.28: [15578]: --> [2:OK]
May 10 12:09:26.28: [15578]: <-- [9:AT+FTS=7\r]
May 10 12:09:26.37: [15578]: --> [2:OK]
May 10 12:09:26.37: [15578]: <-- [10:AT+FTM=72\r]
May 10 12:09:26.43: [15578]: --> [7:CONNECT]
May 10 12:09:26.43: [15578]: <-- data [1024]
May 10 12:09:26.43: [15578]: <-- data [326]
May 10 12:09:26.43: [15578]: <-- data [2]
May 10 12:09:28.38: [15578]: --> [2:OK]
May 10 12:09:28.38: [15578]: <-- [9:AT+FRH=3\r]
May 10 12:09:30.58: [15578]: --> [7:CONNECT]
May 10 12:09:32.35: [15578]: --> [2:OK]
May 10 12:09:32.35: [15578]: REMOTE NSF "00 00 11 80 00 80 49 10 43 4F 4E 4E 45 43 54 49 4F 4E 53 20 20 20 20 20 00 00 01 80 80 C0 06 01 01 01 01"
May 10 12:09:32.35: [15578]: NSF remote fax equipment: Canon Fax B100
May 10 12:09:32.35: [15578]: NSF remote station ID: "CONNECTIONS     "
May 10 12:09:32.35: [15578]: <-- [9:AT+FRH=3\r]
May 10 12:09:32.37: [15578]: --> [7:CONNECT]
May 10 12:09:33.10: [15578]: --> [2:OK]
May 10 12:09:33.10: [15578]: REMOTE CSI "0299762711"
May 10 12:09:33.10: [15578]: <-- [9:AT+FRH=3\r]
May 10 12:09:33.12: [15578]: --> [7:CONNECT]
May 10 12:09:33.39: [15578]: --> [2:OK]
May 10 12:09:33.39: [15578]: SEND training at v.29 7200 bit/s
May 10 12:09:33.39: [15578]: <-- [9:AT+FRS=7\r]
May 10 12:09:33.51: [15578]: --> [2:OK]
May 10 12:09:33.51: [15578]: <-- [9:AT+FTH=3\r]
May 10 12:09:33.56: [15578]: --> [7:CONNECT]
May 10 12:09:33.56: [15578]: <-- data [23]
May 10 12:09:33.56: [15578]: <-- data [2]
May 10 12:09:35.35: [15578]: --> [7:CONNECT]
May 10 12:09:35.35: [15578]: <-- data [7]
May 10 12:09:35.35: [15578]: <-- data [2]
May 10 12:09:35.81: [15578]: --> [2:OK]
May 10 12:09:35.81: [15578]: <-- [9:AT+FTS=7\r]
May 10 12:09:35.90: [15578]: --> [2:OK]
May 10 12:09:35.90: [15578]: <-- [10:AT+FTM=72\r]
May 10 12:09:35.96: [15578]: --> [7:CONNECT]
May 10 12:09:35.96: [15578]: <-- data [1024]
May 10 12:09:35.96: [15578]: <-- data [326]
May 10 12:09:35.96: [15578]: <-- data [2]
May 10 12:09:37.91: [15578]: --> [2:OK]
May 10 12:09:37.91: [15578]: <-- [9:AT+FRH=3\r]
May 10 12:09:41.01: [15578]: --> [0:]
May 10 12:09:41.01: [15578]: MODEM <Empty line>
May 10 12:09:41.02: [15578]: <-- data [1]
May 10 12:09:41.06: [15578]: --> [2:OK]
May 10 12:09:41.06: [15578]: DELAY 1500 ms
May 10 12:09:42.56: [15578]: SEND training at v.27ter 4800 bit/s
May 10 12:09:42.56: [15578]: <-- [9:AT+FRS=7\r]
May 10 12:09:42.68: [15578]: --> [2:OK]
May 10 12:09:42.68: [15578]: <-- [9:AT+FTH=3\r]
May 10 12:09:42.73: [15578]: --> [7:CONNECT]
May 10 12:09:42.73: [15578]: <-- data [23]
May 10 12:09:42.73: [15578]: <-- data [2]
May 10 12:09:44.51: [15578]: --> [7:CONNECT]
May 10 12:09:44.51: [15578]: <-- data [7]
May 10 12:09:44.51: [15578]: <-- data [2]
May 10 12:09:44.98: [15578]: --> [2:OK]
May 10 12:09:44.98: [15578]: <-- [9:AT+FTS=7\r]
May 10 12:09:45.07: [15578]: --> [2:OK]
May 10 12:09:45.07: [15578]: <-- [10:AT+FTM=48\r]
May 10 12:09:45.11: [15578]: --> [7:CONNECT]
May 10 12:09:45.11: [15578]: <-- data [900]
May 10 12:09:45.11: [15578]: <-- data [2]
May 10 12:09:47.54: [15578]: --> [2:OK]
May 10 12:09:47.54: [15578]: <-- [9:AT+FRH=3\r]
May 10 12:09:50.65: [15578]: --> [0:]
May 10 12:09:50.65: [15578]: MODEM <Empty line>
May 10 12:09:50.65: [15578]: <-- data [1]
May 10 12:09:50.69: [15578]: --> [2:OK]
May 10 12:09:50.69: [15578]: DELAY 1500 ms
May 10 12:09:52.19: [15578]: SEND training at v.27ter fallback mode 2400 bit/s
May 10 12:09:52.19: [15578]: <-- [9:AT+FRS=7\r]
May 10 12:09:52.31: [15578]: --> [2:OK]
May 10 12:09:52.31: [15578]: <-- [9:AT+FTH=3\r]
May 10 12:09:52.36: [15578]: --> [7:CONNECT]
May 10 12:09:52.36: [15578]: <-- data [23]
May 10 12:09:52.36: [15578]: <-- data [2]
May 10 12:09:54.15: [15578]: --> [7:CONNECT]
May 10 12:09:54.15: [15578]: <-- data [7]
May 10 12:09:54.15: [15578]: <-- data [2]
May 10 12:09:54.61: [15578]: --> [2:OK]
May 10 12:09:54.61: [15578]: <-- [9:AT+FTS=7\r]
May 10 12:09:54.70: [15578]: --> [2:OK]
May 10 12:09:54.70: [15578]: <-- [10:AT+FTM=24\r]
May 10 12:09:54.75: [15578]: --> [7:CONNECT]
May 10 12:09:54.75: [15578]: <-- data [450]
May 10 12:09:54.75: [15578]: <-- data [2]
May 10 12:09:57.42: [15578]: --> [2:OK]
May 10 12:09:57.42: [15578]: <-- [9:AT+FRH=3\r]
May 10 12:10:00.52: [15578]: --> [0:]
May 10 12:10:00.52: [15578]: MODEM <Empty line>
May 10 12:10:00.53: [15578]: <-- data [1]
May 10 12:10:00.57: [15578]: --> [2:OK]
May 10 12:10:00.57: [15578]: DELAY 1500 ms
May 10 12:10:02.07: [15578]: TRAINING failed
May 10 12:10:02.07: [15578]: <-- [9:AT+FTH=3\r]
May 10 12:10:02.12: [15578]: --> [7:CONNECT]
May 10 12:10:02.12: [15578]: <-- data [3]
May 10 12:10:02.12: [15578]: <-- data [2]
May 10 12:10:03.44: [15578]: --> [2:OK]
May 10 12:10:03.44: [15578]: <-- [5:ATH0\r]
May 10 12:10:04.98: [15578]: --> [2:OK]
May 10 12:10:04.98: [15578]: SESSION END

Regards,

 

Hector Lucenti

 

Network Engineer
IT Desktop Support Team

 

15 Pittwater road Manly NSW 2095
P : (02) 9474 1236
F : (02) 9474 1229

 

Email: hector@xxxxxxxxxx
Web : www.cxcglobal.com

 

Disclaimer: The information contained in or attached to his message is intended
only for the people it is addressed to. If you are not the intended recipient,
any use, disclosure or copying of this information is unauthorised and prohibited.
This information may be confidential or subject to legal privilege. It is not the
expressed view of Consultants Exchange Australasia limited unless that is clearly
stated. Consultants Exchange cannot accept liability for any virus damage caused by
this message. This documentation is for your general information, and is not to be
construed as advice. Clients should not act on the information contained herein
alone, and should seek the advice of their accountants and lawyers.