Re: [hylafax-users] Failure to train remote modem

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

What is happening on the receive-end of this call?  Do you know?

Lee.


Hector Lucenti wrote:

> Hi,
>  
> I am using Fedora Core 4.
>  
> My Hylafax was working flawless for more than 6 months.
>  
> Two days ago all my faxes are failing.
>  
> Most of the errors are:
>  
> Failure to train remote modem.
>  
>  
> I have tried 3 diff. modems and I get the same.
>  
> I have changed phone lines and I get the same.
>  
> I can't figure this one out.
>  
> Help will be appreciated.
>  
> Here is the log:
>  
> May 10 12:08:40.14: [15578]: SESSION BEGIN 000005553 61299762711
> May 10 12:08:40.14: [15578]: HylaFAX (tm) Version 4.2.5
> May 10 12:08:40.14: [15578]: SEND FAX: JOB 4336 DEST 99762711 COMMID 
> 000005553 DEVICE '/dev/ttyS0' FROM 'root <root@xxxxxxxxxxxxxxxxx>' 
> <mailto:root@xxxxxxxxxxxxxxxxx%3E%27> USER root
> May 10 12:08:40.14: [15578]: <-- [12:AT+FCLASS=1\r]
> May 10 12:08:40.15: [15578]: --> [2:OK]
> May 10 12:08:40.16: [15578]: DIAL 99762711
> May 10 12:08:40.16: [15578]: <-- [13:ATDT99762711\r]
> May 10 12:09:05.63: [15578]: --> [7:CONNECT]
> May 10 12:09:06.75: [15578]: --> [5:ERROR]
> May 10 12:09:06.75: [15578]: MODEM Command error
> May 10 12:09:06.75: [15578]: FCS error
> May 10 12:09:06.75: [15578]: <-- [9:AT+FRS=7\r]
> May 10 12:09:06.87: [15578]: --> [2:OK]
> May 10 12:09:06.87: [15578]: <-- [9:AT+FTH=3\r]
> May 10 12:09:06.92: [15578]: --> [7:CONNECT]
> May 10 12:09:06.92: [15578]: <-- data [3]
> May 10 12:09:06.92: [15578]: <-- data [2]
> May 10 12:09:08.24: [15578]: --> [2:OK]
> May 10 12:09:08.24: [15578]: SEND send CRP (command repeat)
> May 10 12:09:08.24: [15578]: <-- [9:AT+FRH=3\r]
> May 10 12:09:11.80: [15578]: --> [7:CONNECT]
> May 10 12:09:13.68: [15578]: --> [2:OK]
> May 10 12:09:13.68: [15578]: REMOTE NSF "00 00 11 80 00 80 49 10 43 4F 
> 4E 4E 45 43 54 49 4F 4E 53 20 20 20 20 20 00 00 01 80 80 C0 06 01 01 
> 01 01"
> May 10 12:09:13.68: [15578]: NSF remote fax equipment: Canon Fax B100
> May 10 12:09:13.68: [15578]: NSF remote station ID: "CONNECTIONS     "
> May 10 12:09:13.68: [15578]: <-- [9:AT+FRH=3\r]
> May 10 12:09:13.70: [15578]: --> [7:CONNECT]
> May 10 12:09:14.40: [15578]: --> [2:OK]
> May 10 12:09:14.40: [15578]: REMOTE CSI "0299762711"
> May 10 12:09:14.40: [15578]: <-- [9:AT+FRH=3\r]
> May 10 12:09:14.41: [15578]: --> [7:CONNECT]
> May 10 12:09:14.69: [15578]: --> [2:OK]
> May 10 12:09:14.69: [15578]: REMOTE best rate 9600 bit/s
> May 10 12:09:14.69: [15578]: REMOTE max A4 page width (215 mm)
> May 10 12:09:14.69: [15578]: REMOTE max unlimited page length
> May 10 12:09:14.69: [15578]: REMOTE best vres 7.7 line/mm
> May 10 12:09:14.69: [15578]: REMOTE format support: MH, MR, MMR
> May 10 12:09:14.69: [15578]: REMOTE supports T.30 Annex A, 256-byte ECM
> May 10 12:09:14.69: [15578]: REMOTE best 20 ms/scanline
> May 10 12:09:14.69: [15578]: USE 9600 bit/s
> May 10 12:09:14.69: [15578]: USE error correction mode
> May 10 12:09:14.69: [15578]: SEND file "docq/doc4278.ps;30"
> May 10 12:09:14.69: [15578]: USE A4 page width (215 mm)
> May 10 12:09:14.69: [15578]: USE unlimited page length
> May 10 12:09:14.69: [15578]: USE 3.85 line/mm
> May 10 12:09:14.69: [15578]: USE 2-D MMR
> May 10 12:09:14.69: [15578]: USE 0 ms/scanline
> May 10 12:09:14.69: [15578]: SEND training at v.29 9600 bit/s
> May 10 12:09:14.69: [15578]: <-- [9:AT+FRS=7\r]
> May 10 12:09:14.81: [15578]: --> [2:OK]
> May 10 12:09:14.81: [15578]: <-- [9:AT+FTH=3\r]
> May 10 12:09:14.86: [15578]: --> [7:CONNECT]
> May 10 12:09:14.86: [15578]: <-- data [23]
> May 10 12:09:14.86: [15578]: <-- data [2]
> May 10 12:09:16.64: [15578]: --> [7:CONNECT]
> May 10 12:09:16.64: [15578]: <-- data [7]
> May 10 12:09:16.64: [15578]: <-- data [2]
> May 10 12:09:17.11: [15578]: --> [2:OK]
> May 10 12:09:17.11: [15578]: <-- [9:AT+FTS=7\r]
> May 10 12:09:17.20: [15578]: --> [2:OK]
> May 10 12:09:17.20: [15578]: <-- [10:AT+FTM=96\r]
> May 10 12:09:17.26: [15578]: --> [7:CONNECT]
> May 10 12:09:17.26: [15578]: <-- data [1024]
> May 10 12:09:17.26: [15578]: <-- data [776]
> May 10 12:09:17.26: [15578]: <-- data [2]
> May 10 12:09:19.21: [15578]: --> [2:OK]
> May 10 12:09:19.21: [15578]: <-- [9:AT+FRH=3\r]
> May 10 12:09:22.31: [15578]: --> [0:]
> May 10 12:09:22.31: [15578]: MODEM <Empty line>
> May 10 12:09:22.31: [15578]: <-- data [1]
> May 10 12:09:22.36: [15578]: --> [2:OK]


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*