Re: [hylafax-users] RSPREC error/got DCN (code 51) since hylafax upgrade

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

Are you positive that you're not using different modems here?  Or maybe 
different modem revisions or something.  Because it really does appear 
that your modem suddenly gained the ability to use ECM.

Lee.


Jeff Brickwell wrote:

> -------------------Session log for error case 
> ----------------------------
>
> Feb 13 09:11:21.58: [ 8202]: SESSION BEGIN 000000005 XXXXXXXXXXX
> Feb 13 09:11:21.58: [ 8202]: HylaFAX (tm) Version 4.3.1
> Feb 13 09:11:21.58: [ 8202]: SEND FAX: JOB 8 DEST XXXXXXXXXX COMMID
> 000000005 DEVICE '/dev/tmodem30' FROM 'uucp ' USER uucp
> Feb 13 09:11:21.58: [ 8202]: <-- [10:AT+FTBC=0\r]
> Feb 13 09:11:21.91: [ 8202]: --> [2:OK]
> Feb 13 09:11:21.91: [ 8202]: <-- [10:AT+FBOR=0\r]
> Feb 13 09:11:22.19: [ 8202]: --> [2:OK]
> Feb 13 09:11:22.19: [ 8202]: <-- [13:AT+FPHCTO=30\r]
> Feb 13 09:11:22.46: [ 8202]: --> [2:OK]
> Feb 13 09:11:22.46: [ 8202]: <-- [24:AT+FDCC=1,5,2,2,3,1,0,0\r]
> Feb 13 09:11:22.73: [ 8202]: --> [2:OK]
> Feb 13 09:11:22.75: [ 8202]: DIAL XXXXXXXXXX
> Feb 13 09:11:22.75: [ 8202]: <-- [15:ATDTXXXXXXXXXX\r]
> Feb 13 09:11:35.34: [ 8202]: --> [5:+FCON]
> Feb 13 09:11:37.27: [ 8202]: --> [110:+FNSF:00 00 11 80 00 8A 49 10 41
> 6C 62 65 72 74 20 41 6E 69 6D 61 6C 20 48 6F 00 89 00 80 80 80 06 01
> 01 01 01]
> Feb 13 09:11:37.27: [ 8202]: REMOTE NSF "00 00 11 80 00 8A 49 10 41 6C
> 62 65 72 74 20 41 6E 69 6D 61 6C 20 48 6F 00 89 00 80 80 80 06 01 01
> 01 01"
> Feb 13 09:11:37.27: [ 8202]: NSF remote fax equipment: Canon Laser
> Class 9000 Series
> Feb 13 09:11:37.27: [ 8202]: NSF remote station ID: "Albert Place Hou"
> Feb 13 09:11:38.00: [ 8202]: --> [28:+FCSI:" XXXXXXXXXX"]
> Feb 13 09:11:38.00: [ 8202]: REMOTE CSI "XXXXXXXXXX"
> Feb 13 09:11:38.43: [ 8202]: --> [21:+FDIS:1,5,0,2,3,1,0,3]
> Feb 13 09:11:38.43: [ 8202]: --> [2:OK]
> Feb 13 09:11:38.43: [ 8202]: REMOTE best rate 14400 bit/s
> Feb 13 09:11:38.43: [ 8202]: REMOTE max A4 page width (215 mm)
> Feb 13 09:11:38.43: [ 8202]: REMOTE max unlimited page length
> Feb 13 09:11:38.43: [ 8202]: REMOTE best vres 7.7 line/mm
> Feb 13 09:11:38.43: [ 8202]: REMOTE format support: MH, MMR
> Feb 13 09:11:38.43: [ 8202]: REMOTE supports T.30 Annex A, 64-byte ECM
> Feb 13 09:11:38.43: [ 8202]: REMOTE best 10 ms/scanline
> Feb 13 09:11:38.43: [ 8202]: USE 14400 bit/s
> Feb 13 09:11:38.43: [ 8202]: USE error correction mode
> Feb 13 09:11:38.43: [ 8202]: SEND file "docq/doc8.ps;c1"
> Feb 13 09:11:38.44: [ 8202]: USE A4 page width (215 mm)
> Feb 13 09:11:38.44: [ 8202]: USE unlimited page length
> Feb 13 09:11:38.44: [ 8202]: USE 7.7 line/mm
> Feb 13 09:11:38.44: [ 8202]: USE 2-D MMR
> Feb 13 09:11:38.44: [ 8202]: USE 0 ms/scanline
> Feb 13 09:11:38.44: [ 8202]: <-- [24:AT+FDIS=1,5,0,2,3,1,0,0\r]
> Feb 13 09:11:38.70: [ 8202]: --> [2:OK]
> Feb 13 09:11:38.70: [ 8202]: <-- [7:AT+FDT\r]
> Feb 13 09:11:45.97: [ 8202]: --> [21:+FDCS:1,5,0,2,3,1,0,0]
> Feb 13 09:11:45.97: [ 8202]: --> [7:CONNECT]
> Feb 13 09:11:45.97: [ 8202]: SEND wait for XON
> Feb 13 09:11:45.97: [ 8202]: --> [1:]
> Feb 13 09:11:45.97: [ 8202]: SEND begin page
> Feb 13 09:11:45.99: [ 8202]: <-- data [1038] 

(snipped)

> Feb 13 09:11:47.31: [ 8202]: <-- data [821]
> Feb 13 09:11:47.31: [ 8202]: SENT 11058 bytes of data
> Feb 13 09:11:47.31: [ 8202]: <-- data [2]
> Feb 13 09:11:47.66: [ 8202]: SEND end page
> Feb 13 09:11:53.47: [ 8202]: --> [2:OK]
> Feb 13 09:11:53.47: [ 8202]: SEND send EOP (no more pages or documents)
> Feb 13 09:11:53.47: [ 8202]: <-- [9:AT+FET=2\r]
> Feb 13 09:11:56.69: [ 8202]: --> [8:+FHNG:51]
> Feb 13 09:11:56.69: [ 8202]: REMOTE HANGUP: RSPREC error/got DCN (code 
> 51)
> Feb 13 09:11:56.69: [ 8202]: <-- [5:ATH0\r]
> Feb 13 09:11:56.69: [ 8202]: --> [2:OK]
> Feb 13 09:11:56.69: [ 8202]: SESSION END
>
> -------------------Session log for non-error case 
> ------------------------
>
> Feb 13 09:18:32.47: [23039]: SESSION BEGIN 001435920 XXXXXXXXXXX
> Feb 13 09:18:32.47: [23039]: HylaFAX (tm) Version 4.2.1
> Feb 13 09:18:32.48: [23039]: SEND FAX: JOB 1216416 DEST XXXXXXXXXX
> COMMID 001435920 DEVICE '/dev/modem17'
> Feb 13 09:18:32.48: [23039]: <-- [10:AT+FTBC=0\r]
> Feb 13 09:18:32.63: [23039]: --> [2:OK]
> Feb 13 09:18:32.63: [23039]: <-- [10:AT+FBOR=0\r]
> Feb 13 09:18:32.79: [23039]: --> [2:OK]
> Feb 13 09:18:32.79: [23039]: <-- [13:AT+FPHCTO=30\r]
> Feb 13 09:18:32.94: [23039]: --> [2:OK]
> Feb 13 09:18:32.94: [23039]: <-- [24:AT+FDCC=1,7,2,2,0,0,0,0\r]
> Feb 13 09:18:33.09: [23039]: --> [5:ERROR]
> Feb 13 09:18:33.09: [23039]: MODEM Command error
> Feb 13 09:18:33.09: [23039]: DIAL XXXXXXXXXX
> Feb 13 09:18:33.09: [23039]: <-- [15:ATDTXXXXXXXXXX\r]
> Feb 13 09:18:45.54: [23039]: --> [5:+FCON]
> Feb 13 09:18:47.47: [23039]: --> [110:+FNSF:00 00 11 80 00 8A 49 10 41
> 6C 62 65 72 74 20 41 6E 69 6D 61 6C 20 48 6F 00 89 00 80 80 80 06 01
> 01 01 01]
> Feb 13 09:18:47.47: [23039]: REMOTE NSF "00 00 11 80 00 8A 49 10 41 6C
> 62 65 72 74 20 41 6E 69 6D 61 6C 20 48 6F 00 89 00 80 80 80 06 01 01
> 01 01"
> Feb 13 09:18:47.47: [23039]: NSF remote fax equipment: Canon Laser
> Class 9000 Series
> Feb 13 09:18:47.47: [23039]: NSF remote station ID: "Albert Place Hou"
> Feb 13 09:18:48.21: [23039]: --> [28:+FCSI:" XXXXXXXXXX"]
> Feb 13 09:18:48.21: [23039]: REMOTE CSI "XXXXXXXXXX"
> Feb 13 09:18:48.63: [23039]: --> [21:+FDIS:1,5,0,2,3,1,0,3]
> Feb 13 09:18:48.63: [23039]: --> [2:OK]
> Feb 13 09:18:48.63: [23039]: REMOTE best rate 14400 bit/s
> Feb 13 09:18:48.63: [23039]: REMOTE max A4 page width (215 mm)
> Feb 13 09:18:48.63: [23039]: REMOTE max unlimited page length
> Feb 13 09:18:48.63: [23039]: REMOTE best vres 7.7 line/mm
> Feb 13 09:18:48.63: [23039]: REMOTE best format 2-D MMR
> Feb 13 09:18:48.63: [23039]: REMOTE supports T.30 Annex A, 64-byte ECM
> Feb 13 09:18:48.63: [23039]: REMOTE best 10 ms/scanline
> Feb 13 09:18:48.63: [23039]: USE 14400 bit/s
> Feb 13 09:18:48.63: [23039]: USE 10 ms/scanline
> Feb 13 09:18:48.63: [23039]: SEND file "docq/doc1216423.ps;01"
> Feb 13 09:18:48.63: [23039]: USE A4 page width (215 mm)
> Feb 13 09:18:48.63: [23039]: USE unlimited page length
> Feb 13 09:18:48.63: [23039]: USE 7.7 line/mm
> Feb 13 09:18:48.63: [23039]: USE 1-D MH
> Feb 13 09:18:48.63: [23039]: <-- [24:AT+FDIS=1,5,0,2,0,0,0,3\r]
> Feb 13 09:18:48.79: [23039]: --> [2:OK]
> Feb 13 09:18:48.79: [23039]: <-- [7:AT+FDT\r]
> Feb 13 09:18:55.98: [23039]: --> [21:+FDCS:1,5,0,2,0,0,0,3]
> Feb 13 09:18:56.56: [23039]: --> [7:CONNECT]
> Feb 13 09:18:56.56: [23039]: SEND wait for XON
> Feb 13 09:18:56.56: [23039]: --> [1:]
> Feb 13 09:18:56.56: [23039]: SEND begin page
> Feb 13 09:18:56.56: [23039]: <-- data [1028]
> (snipped)
> Feb 13 09:18:56.57: [23039]: <-- data [1027]
> Feb 13 09:18:56.57: [23039]: <-- data [38]
> Feb 13 09:18:56.57: [23039]: SENT 28710 bytes of data
> Feb 13 09:18:56.57: [23039]: <-- data [2]
> Feb 13 09:18:56.57: [23039]: SEND end page
> Feb 13 09:19:26.27: [23039]: --> [2:OK]
> Feb 13 09:19:26.27: [23039]: SEND send EOP (no more pages or documents)
> Feb 13 09:19:26.27: [23039]: <-- [9:AT+FET=2\r]
> Feb 13 09:19:29.31: [23039]: --> [7:+FPTS:1]
> Feb 13 09:19:30.91: [23039]: --> [7:+FHNG:0]
> Feb 13 09:19:30.91: [23039]: REMOTE HANGUP: Normal and proper end of
> connection (code 0)
> Feb 13 09:19:30.91: [23039]: SEND recv MCF (message confirmation)
> Feb 13 09:19:30.92: [23039]: SEND FAX (001435920): FROM
> jeffb@xxxxxxxxxxxxx TO XXXXXXXXXX (docq/doc1216423.ps;01 sent in 0:42)
> Feb 13 09:19:30.92: [23039]: SEND FAX (001435920): FROM
> jeffb@xxxxxxxxxxxxx TO XXXXXXXXXX (page 1 of 1 sent in 0:42)
> Feb 13 09:19:31.94: [23039]: <-- [5:ATH0\r]
> Feb 13 09:19:31.94: [23039]: --> [2:OK]
> Feb 13 09:19:31.95: [23039]: SESSION END 


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*