Re: [hylafax-users] RSPREC error/got DCN (code 51) since hylafax upgrade

["Jeff Brickwell" <t800949@xxxxxxxxx>]

Session logs for error case and non-error case below.
I've replaced phone number with XXX.

Regards
Jeff

-------------------Session log for error case ----------------------------

Feb 13 09:11:21.58: [ 8202]: SESSION BEGIN 000000005 XXXXXXXXXXX
Feb 13 09:11:21.58: [ 8202]: HylaFAX (tm) Version 4.3.1
Feb 13 09:11:21.58: [ 8202]: SEND FAX: JOB 8 DEST XXXXXXXXXX COMMID
000000005 DEVICE '/dev/tmodem30' FROM 'uucp ' USER uucp
Feb 13 09:11:21.58: [ 8202]: <-- [10:AT+FTBC=0\r]
Feb 13 09:11:21.91: [ 8202]: --> [2:OK]
Feb 13 09:11:21.91: [ 8202]: <-- [10:AT+FBOR=0\r]
Feb 13 09:11:22.19: [ 8202]: --> [2:OK]
Feb 13 09:11:22.19: [ 8202]: <-- [13:AT+FPHCTO=30\r]
Feb 13 09:11:22.46: [ 8202]: --> [2:OK]
Feb 13 09:11:22.46: [ 8202]: <-- [24:AT+FDCC=1,5,2,2,3,1,0,0\r]
Feb 13 09:11:22.73: [ 8202]: --> [2:OK]
Feb 13 09:11:22.75: [ 8202]: DIAL XXXXXXXXXX
Feb 13 09:11:22.75: [ 8202]: <-- [15:ATDTXXXXXXXXXX\r]
Feb 13 09:11:35.34: [ 8202]: --> [5:+FCON]
Feb 13 09:11:37.27: [ 8202]: --> [110:+FNSF:00 00 11 80 00 8A 49 10 41
6C 62 65 72 74 20 41 6E 69 6D 61 6C 20 48 6F 00 89 00 80 80 80 06 01
01 01 01]
Feb 13 09:11:37.27: [ 8202]: REMOTE NSF "00 00 11 80 00 8A 49 10 41 6C
62 65 72 74 20 41 6E 69 6D 61 6C 20 48 6F 00 89 00 80 80 80 06 01 01
01 01"
Feb 13 09:11:37.27: [ 8202]: NSF remote fax equipment: Canon Laser
Class 9000 Series
Feb 13 09:11:37.27: [ 8202]: NSF remote station ID: "Albert Place Hou"
Feb 13 09:11:38.00: [ 8202]: --> [28:+FCSI:" XXXXXXXXXX"]
Feb 13 09:11:38.00: [ 8202]: REMOTE CSI "XXXXXXXXXX"
Feb 13 09:11:38.43: [ 8202]: --> [21:+FDIS:1,5,0,2,3,1,0,3]
Feb 13 09:11:38.43: [ 8202]: --> [2:OK]
Feb 13 09:11:38.43: [ 8202]: REMOTE best rate 14400 bit/s
Feb 13 09:11:38.43: [ 8202]: REMOTE max A4 page width (215 mm)
Feb 13 09:11:38.43: [ 8202]: REMOTE max unlimited page length
Feb 13 09:11:38.43: [ 8202]: REMOTE best vres 7.7 line/mm
Feb 13 09:11:38.43: [ 8202]: REMOTE format support: MH, MMR
Feb 13 09:11:38.43: [ 8202]: REMOTE supports T.30 Annex A, 64-byte ECM
Feb 13 09:11:38.43: [ 8202]: REMOTE best 10 ms/scanline
Feb 13 09:11:38.43: [ 8202]: USE 14400 bit/s
Feb 13 09:11:38.43: [ 8202]: USE error correction mode
Feb 13 09:11:38.43: [ 8202]: SEND file "docq/doc8.ps;c1"
Feb 13 09:11:38.44: [ 8202]: USE A4 page width (215 mm)
Feb 13 09:11:38.44: [ 8202]: USE unlimited page length
Feb 13 09:11:38.44: [ 8202]: USE 7.7 line/mm
Feb 13 09:11:38.44: [ 8202]: USE 2-D MMR
Feb 13 09:11:38.44: [ 8202]: USE 0 ms/scanline
Feb 13 09:11:38.44: [ 8202]: <-- [24:AT+FDIS=1,5,0,2,3,1,0,0\r]
Feb 13 09:11:38.70: [ 8202]: --> [2:OK]
Feb 13 09:11:38.70: [ 8202]: <-- [7:AT+FDT\r]
Feb 13 09:11:45.97: [ 8202]: --> [21:+FDCS:1,5,0,2,3,1,0,0]
Feb 13 09:11:45.97: [ 8202]: --> [7:CONNECT]
Feb 13 09:11:45.97: [ 8202]: SEND wait for XON
Feb 13 09:11:45.97: [ 8202]: --> [1:]
Feb 13 09:11:45.97: [ 8202]: SEND begin page
Feb 13 09:11:45.99: [ 8202]: <-- data [1038]
Feb 13 09:11:46.08: [ 8202]: <-- data [1032]
Feb 13 09:11:46.08: [ 8202]: <-- data [1032]
Feb 13 09:11:46.08: [ 8202]: <-- data [1026]
Feb 13 09:11:46.08: [ 8202]: <-- data [1033]
Feb 13 09:11:46.69: [ 8202]: <-- data [1030]
Feb 13 09:11:46.69: [ 8202]: <-- data [1028]
Feb 13 09:11:46.69: [ 8202]: <-- data [1028]
Feb 13 09:11:46.69: [ 8202]: <-- data [1033]
Feb 13 09:11:47.31: [ 8202]: <-- data [1031]
Feb 13 09:11:47.31: [ 8202]: <-- data [821]
Feb 13 09:11:47.31: [ 8202]: SENT 11058 bytes of data
Feb 13 09:11:47.31: [ 8202]: <-- data [2]
Feb 13 09:11:47.66: [ 8202]: SEND end page
Feb 13 09:11:53.47: [ 8202]: --> [2:OK]
Feb 13 09:11:53.47: [ 8202]: SEND send EOP (no more pages or documents)
Feb 13 09:11:53.47: [ 8202]: <-- [9:AT+FET=2\r]
Feb 13 09:11:56.69: [ 8202]: --> [8:+FHNG:51]
Feb 13 09:11:56.69: [ 8202]: REMOTE HANGUP: RSPREC error/got DCN (code 51)
Feb 13 09:11:56.69: [ 8202]: <-- [5:ATH0\r]
Feb 13 09:11:56.69: [ 8202]: --> [2:OK]
Feb 13 09:11:56.69: [ 8202]: SESSION END

-------------------Session log for non-error case ------------------------

Feb 13 09:18:32.47: [23039]: SESSION BEGIN 001435920 XXXXXXXXXXX
Feb 13 09:18:32.47: [23039]: HylaFAX (tm) Version 4.2.1
Feb 13 09:18:32.48: [23039]: SEND FAX: JOB 1216416 DEST XXXXXXXXXX
COMMID 001435920 DEVICE '/dev/modem17'
Feb 13 09:18:32.48: [23039]: <-- [10:AT+FTBC=0\r]
Feb 13 09:18:32.63: [23039]: --> [2:OK]
Feb 13 09:18:32.63: [23039]: <-- [10:AT+FBOR=0\r]
Feb 13 09:18:32.79: [23039]: --> [2:OK]
Feb 13 09:18:32.79: [23039]: <-- [13:AT+FPHCTO=30\r]
Feb 13 09:18:32.94: [23039]: --> [2:OK]
Feb 13 09:18:32.94: [23039]: <-- [24:AT+FDCC=1,7,2,2,0,0,0,0\r]
Feb 13 09:18:33.09: [23039]: --> [5:ERROR]
Feb 13 09:18:33.09: [23039]: MODEM Command error
Feb 13 09:18:33.09: [23039]: DIAL XXXXXXXXXX
Feb 13 09:18:33.09: [23039]: <-- [15:ATDTXXXXXXXXXX\r]
Feb 13 09:18:45.54: [23039]: --> [5:+FCON]
Feb 13 09:18:47.47: [23039]: --> [110:+FNSF:00 00 11 80 00 8A 49 10 41
6C 62 65 72 74 20 41 6E 69 6D 61 6C 20 48 6F 00 89 00 80 80 80 06 01
01 01 01]
Feb 13 09:18:47.47: [23039]: REMOTE NSF "00 00 11 80 00 8A 49 10 41 6C
62 65 72 74 20 41 6E 69 6D 61 6C 20 48 6F 00 89 00 80 80 80 06 01 01
01 01"
Feb 13 09:18:47.47: [23039]: NSF remote fax equipment: Canon Laser
Class 9000 Series
Feb 13 09:18:47.47: [23039]: NSF remote station ID: "Albert Place Hou"
Feb 13 09:18:48.21: [23039]: --> [28:+FCSI:" XXXXXXXXXX"]
Feb 13 09:18:48.21: [23039]: REMOTE CSI "XXXXXXXXXX"
Feb 13 09:18:48.63: [23039]: --> [21:+FDIS:1,5,0,2,3,1,0,3]
Feb 13 09:18:48.63: [23039]: --> [2:OK]
Feb 13 09:18:48.63: [23039]: REMOTE best rate 14400 bit/s
Feb 13 09:18:48.63: [23039]: REMOTE max A4 page width (215 mm)
Feb 13 09:18:48.63: [23039]: REMOTE max unlimited page length
Feb 13 09:18:48.63: [23039]: REMOTE best vres 7.7 line/mm
Feb 13 09:18:48.63: [23039]: REMOTE best format 2-D MMR
Feb 13 09:18:48.63: [23039]: REMOTE supports T.30 Annex A, 64-byte ECM
Feb 13 09:18:48.63: [23039]: REMOTE best 10 ms/scanline
Feb 13 09:18:48.63: [23039]: USE 14400 bit/s
Feb 13 09:18:48.63: [23039]: USE 10 ms/scanline
Feb 13 09:18:48.63: [23039]: SEND file "docq/doc1216423.ps;01"
Feb 13 09:18:48.63: [23039]: USE A4 page width (215 mm)
Feb 13 09:18:48.63: [23039]: USE unlimited page length
Feb 13 09:18:48.63: [23039]: USE 7.7 line/mm
Feb 13 09:18:48.63: [23039]: USE 1-D MH
Feb 13 09:18:48.63: [23039]: <-- [24:AT+FDIS=1,5,0,2,0,0,0,3\r]
Feb 13 09:18:48.79: [23039]: --> [2:OK]
Feb 13 09:18:48.79: [23039]: <-- [7:AT+FDT\r]
Feb 13 09:18:55.98: [23039]: --> [21:+FDCS:1,5,0,2,0,0,0,3]
Feb 13 09:18:56.56: [23039]: --> [7:CONNECT]
Feb 13 09:18:56.56: [23039]: SEND wait for XON
Feb 13 09:18:56.56: [23039]: --> [1:]
Feb 13 09:18:56.56: [23039]: SEND begin page
Feb 13 09:18:56.56: [23039]: <-- data [1028]
Feb 13 09:18:56.56: [23039]: <-- data [1027]
Feb 13 09:18:56.57: [23039]: <-- data [1028]
Feb 13 09:18:56.57: [23039]: <-- data [1031]
Feb 13 09:18:56.57: [23039]: <-- data [1029]
Feb 13 09:18:56.57: [23039]: <-- data [1025]
Feb 13 09:18:56.57: [23039]: <-- data [1026]
Feb 13 09:18:56.57: [23039]: <-- data [1027]
Feb 13 09:18:56.57: [23039]: <-- data [1029]
Feb 13 09:18:56.57: [23039]: <-- data [1029]
Feb 13 09:18:56.57: [23039]: <-- data [1025]
Feb 13 09:18:56.57: [23039]: <-- data [1027]
Feb 13 09:18:56.57: [23039]: <-- data [1027]
Feb 13 09:18:56.57: [23039]: <-- data [1026]
Feb 13 09:18:56.57: [23039]: <-- data [1026]
Feb 13 09:18:56.57: [23039]: <-- data [1025]
Feb 13 09:18:56.57: [23039]: <-- data [1025]
Feb 13 09:18:56.57: [23039]: <-- data [1028]
Feb 13 09:18:56.57: [23039]: <-- data [1025]
Feb 13 09:18:56.57: [23039]: <-- data [1028]
Feb 13 09:18:56.57: [23039]: <-- data [1029]
Feb 13 09:18:56.57: [23039]: <-- data [1030]
Feb 13 09:18:56.57: [23039]: <-- data [1024]
Feb 13 09:18:56.57: [23039]: <-- data [1024]
Feb 13 09:18:56.57: [23039]: <-- data [1024]
Feb 13 09:18:56.57: [23039]: <-- data [1024]
Feb 13 09:18:56.57: [23039]: <-- data [1025]
Feb 13 09:18:56.57: [23039]: <-- data [1027]
Feb 13 09:18:56.57: [23039]: <-- data [38]
Feb 13 09:18:56.57: [23039]: SENT 28710 bytes of data
Feb 13 09:18:56.57: [23039]: <-- data [2]
Feb 13 09:18:56.57: [23039]: SEND end page
Feb 13 09:19:26.27: [23039]: --> [2:OK]
Feb 13 09:19:26.27: [23039]: SEND send EOP (no more pages or documents)
Feb 13 09:19:26.27: [23039]: <-- [9:AT+FET=2\r]
Feb 13 09:19:29.31: [23039]: --> [7:+FPTS:1]
Feb 13 09:19:30.91: [23039]: --> [7:+FHNG:0]
Feb 13 09:19:30.91: [23039]: REMOTE HANGUP: Normal and proper end of
connection (code 0)
Feb 13 09:19:30.91: [23039]: SEND recv MCF (message confirmation)
Feb 13 09:19:30.92: [23039]: SEND FAX (001435920): FROM
jeffb@xxxxxxxxxxxxx TO XXXXXXXXXX (docq/doc1216423.ps;01 sent in 0:42)
Feb 13 09:19:30.92: [23039]: SEND FAX (001435920): FROM
jeffb@xxxxxxxxxxxxx TO XXXXXXXXXX (page 1 of 1 sent in 0:42)
Feb 13 09:19:31.94: [23039]: <-- [5:ATH0\r]
Feb 13 09:19:31.94: [23039]: --> [2:OK]
Feb 13 09:19:31.95: [23039]: SESSION END


On 13/02/07, Lee Howard <faxguy@xxxxxxxxxxxxxxxx> wrote:
> Jeff Brickwell wrote:
>
> > Sending to some remote fax machines consistently give the error:
> > "RSPREC error/got DCN (code 51)"
>
>
> Can you please show me session logs for the error cases and then session
> logs for the non-error cases?
>
> Thanks,
>
> Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*