Re: [hylafax-users] Remote fax answers but fails

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

bubba wrote:

> Jan 04 14:56:29.81: [ 2932]: REMOTE best rate 14400 bit/s
> Jan 04 14:56:29.81: [ 2932]: REMOTE max A4 page width (215 mm)
> Jan 04 14:56:29.81: [ 2932]: REMOTE max unlimited page length
> Jan 04 14:56:29.81: [ 2932]: REMOTE best vres 300 x 300 dpi
> Jan 04 14:56:29.81: [ 2932]: REMOTE format support: MH, MR, MMR, JBIG
> Jan 04 14:56:29.81: [ 2932]: REMOTE supports T.30 Annex A, 256-byte ECM
> Jan 04 14:56:29.81: [ 2932]: REMOTE best 0 ms/scanline
> Jan 04 14:56:29.81: [ 2932]: USE 14400 bit/s
> Jan 04 14:56:29.81: [ 2932]: USE error correction mode
> Jan 04 14:56:29.81: [ 2932]: <-- [9:AT+FTH=3\r]
> Jan 04 14:56:29.83: [ 2932]: --> [7:CONNECT]
> Jan 04 14:56:29.83: [ 2932]: <-- HDLC<3:FF C8 DF>
> Jan 04 14:56:31.01: [ 2932]: --> [2:OK]
> Jan 04 14:56:31.01: [ 2932]: MODEM input buffering enabled
> Jan 04 14:56:31.01: [ 2932]: <-- [5:ATH0\r]
> Jan 04 14:56:31.11: [ 2932]: --> [2:OK]


It means that there is some problem with the job or documents that you 
submitted.  Like - maybe the job didn't have any documents.  Or maybe 
all of the documents were not appropriate for faxing.  This problem is 
*supposed* to be caught by faxq before it gets to faxsend - but this is 
how faxsend reacts to that situation.

What client program are you using?  Does this happen when you use sendfax?

Lee.


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*