Re: [hylafax-users] Small fonts on delivered fax

["Kevin Jordan" <kmj7777@xxxxxxxxx>]

On 12/5/06, Kevin Jordan <kmj7777@xxxxxxxxx> wrote:
> On 12/5/06, Kevin Jordan <kmj7777@xxxxxxxxx> wrote:
> > ---------- Forwarded message ----------
> > From: Kevin Jordan <kmj7777@xxxxxxxxx>
> > Date: Dec 5, 2006 11:39 AM
> > Subject: Re: [hylafax-users] Small fonts on delivered fax
> > To: A J Stiles <hylafax_resp@xxxxxxxxxxxxxxx>
> >
> >
> > On 12/5/06, A J Stiles <hylafax_resp@xxxxxxxxxxxxxxx> wrote:
> > > On Tuesday 05 December 2006 17:15, you wrote:
> > > > Well, I was apparently using mgetty's version which doesn't support
> > > > anything but g3.  I'm trying to get hylafax's to work, but it doesn't
> > > > dial nor does anything come out the other end.
> > >
> > > # sendfax -n -d 012345678901 filename
> > > -n = no cover page
> > > -d = destination number
> > >
> > > If that doesn't work, you may have messed up your configuration files
> > > somewhere.  What distribution are you using, and did you compile Hylafax from
> > > source or use your distribution's packages?
> > >
> > > Also, your mail client appears to be misconfigured!  The quoted text  (usually
> > > asking a question)  goes at the top, and your reply goes underneath.
> > >
> > > --
> > > AJS
> > >
> > > ____________________ HylaFAX(tm) Users Mailing List _______________________
> > >   To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
> > >  On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
> > >   *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
> > >
> > >
> > I'm using Gentoo and so it's compiled from source.  When I type the
> > command, I get the output:
> > request id is 1 (group id 1) for host localhost (1 file)
> > So it seems to be getting queued somewhere because the ids increment
> > by 1 each time I send another one.  So how do I get it to send what's
> > queued up?
> >
> > --
> > Kevin Jordan
> >
> >
> > --
> > Kevin Jordan
> >
> I figured out that faxgetty wasn't running and once I started that up
> it started sending and the fax came out perfectly.  Thank you.
>
> --
> Kevin Jordan
Now I've got another problem.  The fax will timeout the first time
always and the fax will be incomplete.  The log is as follows:
Dec 05 16:34:28.90: [ 4328]: SESSION BEGIN 000000022 191398299005
Dec 05 16:34:28.90: [ 4328]: HylaFAX (tm) Version 4.3.0
Dec 05 16:34:28.90: [ 4328]: SEND FAX: JOB 6 DEST 98299005 COMMID
000000022 DEVICE '/dev/ttyS1' FROM 'kevin.jordan
<kevin.jordan@xxxxxxxxxxxxxx>' USER root
Dec 05 16:34:28.90: [ 4328]: <-- [9:AT+FLO=r]
Dec 05 16:34:28.91: [ 4328]: --> [2:OK]
Dec 05 16:34:28.91: [ 4328]: <-- [9:AT+FPP=r]
Dec 05 16:34:28.92: [ 4328]: --> [2:OK]
Dec 05 16:34:28.92: [ 4328]: <-- [9:AT+FBO=r]
Dec 05 16:34:28.93: [ 4328]: --> [2:OK]
Dec 05 16:34:28.93: [ 4328]: <-- [10:AT+FCT0\r]
Dec 05 16:34:28.94: [ 4328]: --> [2:OK]
Dec 05 16:34:28.94: [ 4328]: <-- [15:AT+FNR=1,1,0\r]
Dec 05 16:34:28.95: [ 4328]: --> [2:OK]
Dec 05 16:34:28.95: [ 4328]: <-- [9:AT+FIE=r]
Dec 05 16:34:28.96: [ 4328]: --> [2:OK]
Dec 05 16:34:28.96: [ 4328]: <-- [23:AT+FCC=5,2,2,0,0,0,0\r]
Dec 05 16:34:28.97: [ 4328]: --> [2:OK]
Dec 05 16:34:28.97: [ 4328]: DIAL 98299005
Dec 05 16:34:28.97: [ 4328]: <-- [13:ATDT98299005\r]
Dec 05 16:34:45.08: [ 4328]: --> [4:+FCO]
Dec 05 16:34:47.65: [ 4328]: --> [27:+FCI:"          9138299005"]
Dec 05 16:34:47.65: [ 4328]: REMOTE CSI "9138299005"
Dec 05 16:34:47.66: [ 4328]: --> [20:+FIS:1,5,0,2,1,0,0,3]
Dec 05 16:34:47.66: [ 4328]: --> [2:OK]
Dec 05 16:34:47.66: [ 4328]: REMOTE best rate 14400 bit/s
Dec 05 16:34:47.66: [ 4328]: REMOTE max A4 page width (215 mm)
Dec 05 16:34:47.66: [ 4328]: REMOTE max unlimited page length
Dec 05 16:34:47.66: [ 4328]: REMOTE best vres 7.7 line/mm
Dec 05 16:34:47.66: [ 4328]: REMOTE format support: MH
Dec 05 16:34:47.66: [ 4328]: REMOTE best 10 ms/scanline
Dec 05 16:34:47.66: [ 4328]: USE 14400 bit/s
Dec 05 16:34:47.66: [ 4328]: SEND file "docq/cover6;30"
Dec 05 16:34:47.66: [ 4328]: USE A4 page width (215 mm)
Dec 05 16:34:47.66: [ 4328]: USE unlimited page length
Dec 05 16:34:47.66: [ 4328]: USE 3.85 line/mm
Dec 05 16:34:47.66: [ 4328]: USE 1-D MH
Dec 05 16:34:47.66: [ 4328]: USE 10 ms/scanline
Dec 05 16:34:47.66: [ 4328]: <-- [23:AT+FIS=5,0,2,0,0,0,3\r]
Dec 05 16:34:47.68: [ 4328]: --> [2:OK]
Dec 05 16:34:47.68: [ 4328]: <-- [7:AT+FDT\r]
Dec 05 16:34:47.85: [ 4328]: --> [20:+FCS:0,5,0,2,0,0,0,3]
Dec 05 16:34:54.55: [ 4328]: --> [7:CONNECT]
Dec 05 16:34:54.55: [ 4328]: SEND begin page
Dec 05 16:35:02.88: [ 4328]: SENT 13216 bytes of data
Dec 05 16:35:02.92: [ 4328]: SEND 1D RTC
Dec 05 16:35:02.92: [ 4328]: SEND end page
Dec 05 16:35:02.92: [ 4328]: SEND send MPS (more pages, same document)
Dec 05 16:35:11.10: [ 4328]: --> [2:OK]
Dec 05 16:35:11.10: [ 4328]: <-- [8:AT+FPS?\r]
Dec 05 16:35:11.24: [ 4328]: --> [1:1]
Dec 05 16:35:11.24: [ 4328]: --> [2:OK]
Dec 05 16:35:11.24: [ 4328]: SEND recv MCF (message confirmation)
Dec 05 16:35:11.24: [ 4328]: SEND FAX (000000022): FROM
kevin.jordan@xxxxxxxxxxxxxx TO 98299005 (page 1 of 2 sent in 0:24)
Dec 05 16:35:11.24: [ 4328]: SEND FAX (000000022): FROM
kevin.jordan@xxxxxxxxxxxxxx TO 98299005 (docq/cover6;30 sent in 0:24)
Dec 05 16:35:12.25: [ 4328]: SEND file "docq/doc17.ps;30"
Dec 05 16:35:12.25: [ 4328]: <-- [7:AT+FDT\r]
Dec 05 16:35:12.50: [ 4328]: --> [7:CONNECT]
Dec 05 16:35:12.50: [ 4328]: SEND begin page
Dec 05 16:35:18.90: [ 4328]: SENT 20946 bytes of data
Dec 05 16:35:18.90: [ 4328]: SEND 1D RTC
Dec 05 16:35:18.90: [ 4328]: SEND end page
Dec 05 16:35:18.90: [ 4328]: SEND send EOP (no more pages or documents)
Dec 05 16:38:18.90: [ 4328]: REMOTE HANGUP: Unspecified Transmit Phase
D error, including +FPHCTO timeout between data and +FET command (code
50)
Dec 05 16:38:18.90: [ 4328]: <-- [7:AT+FKS\r]
Dec 05 16:38:48.91: [ 4328]: MODEM <Timeout>
Dec 05 16:38:48.91: [ 4328]: <-- [5:ATH0\r]
Dec 05 16:38:53.91: [ 4328]: MODEM <Timeout>
Dec 05 16:38:53.91: [ 4328]: SESSION END

And the second time it will come in complete:
Your facsimile job to 98299005 was completed successfully.

           Pages: 2
        Receiver: 9138299005
         Quality: Normal
      Page Width: 215 (mm)
     Page Length: 279 (mm)
     Signal Rate: 14400 bit/s
     Data Format: 1-D MH
Remote Equipment: unknown
  Remote Station:
         Dialogs: 2 (exchanges with remote device)
           Calls: 2 (total phone calls placed)
  Submitted From: localhost
           JobID: 6
         GroupID: 6
          CommID: c000000023

Processing time was 0:55.

And another fax I tried to send said it went through successfully but
the guy on the other end said part of it was unreadable.  Any ideas
how to fix this?

--
Kevin Jordan

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*