[hylafax-users] Re[2]: How to use two IP-numbers on one modem?

[Алексей Бологов <toolar@xxxxxxx>]

Hellow, Lee!
Thanks for the answer. But it has not helped me :(
I can not find where change "ModemGroup". Only "ModemType:Class1 " in config.ttyx - but it absolutely another. 


A ttyx file:
#
CountryCode:		7
AreaCode:		501
FAXNumber:		+7.501.555.5555
LongDistancePrefix:	8
InternationalPrefix:	810
DialStringRules:	etc/dialrules
ServerTracing:		1
SessionTracing:		11
RecvFileMode:		0666
LogFileMode:		0600
DeviceMode:		0600
RingsBeforeAnswer:	2
SpeakerVolume:		off
GettyArgs:		"-h %l dx_%s"
LocalIdentifier:	fax_ttyx0
TagLineFont:		etc/lutRS18.pcf
TagLineFormat:		"From %%l|%c|Page %%P of %%T"
MaxRecvPages:		25
#

ModemType:		Class1		# use class 1 interface
ModemFlowControl:	rtscts		# default

ModemRevQueryCmd:	AT+FREV?

#
-----Original Message-----
From: Lee Howard <faxguy@xxxxxxxxxxxxxxxx>
To: Алексей Бологов<toolar@xxxxxxx>
Date: Tue, 14 Nov 2006 22:21:22 -0800
Subject: Re: [hylafax-users] How to use two IP-numbers on one modem?

> 
> Алексей Бологов wrote:
> 
> >One real modem is connected to a server with Hylafax. On the server two virtual modems (ttyx0 and ttyx1) for two various IP-numbers are configured. 
> >I would like, what calling on one of these numbers I got on certain ttyx. 
> >But if I calling on one of thet numbers, I serially get on two modems (ttyx0, then ttyx1, then ttyx0, then ttyx1, and so on).
> >How I can solve this problem?
> >
> 
> Put ttyx1 and ttyx0 into a ModemGroup without the real modem and then, 
> when submitting faxes specify the ModemGroup as the modem to use.  
> Either that, or remove the real modem from the "any" ModemGroup.
> 
> As long as you leave both t38modems' ModemPriority values the same 
> (default) then faxq will, by default, use them in rotation (load balancing).
> 
> Lee.
> 

С уважением, Алексей.

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*