Re: [hylafax-users] Unspecified Transmit Phase C error; too many attempts to send

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

SCIN - Danilo Bottino wrote:

> I googled around with no luck.. any ideas on what is happening here?
>
> nov 15 15:15:55.71: [14083]: <-- [10:AT+FTMH\r]
> nov 15 15:15:55.73: [14083]: --> [7:CONNECT]
> nov 15 15:15:55.73: [14083]: DELAY 400 ms
> nov 15 15:15:56.13: [14083]: SEND begin page
> nov 15 15:15:56.13: [14083]: Reading MMR-compressed image file
> nov 15 15:18:08.50: [14083]: MODEM WRITE SHORT: sent 1027, wrote 980
> nov 15 15:18:08.50: [14083]: SENT 20625 bytes of data
> nov 15 15:18:08.50: [14083]: SEND end page
> nov 15 15:18:08.50: [14083]: Unspecified Transmit Phase C error
> nov 15 15:18:08.50: [14083]: <-- [9:AT+FTH=3\r]
> nov 15 15:18:08.50: [14083]: --> [5:ERROR]
> nov 15 15:18:08.50: [14083]: SEND FAILED: JOB 683 DEST 043733051 ERR 
> Unspecified Transmit Phase C error; too many attempts to send
> nov 15 15:18:08.50: [14083]: <-- [5:ATH0\r]
> nov 15 15:18:13.51: [14083]: MODEM <Timeout> 


It means that while sending Phase C data to the modem stopped accepting 
it ("sent 1027, wrote 980"), and it appears from the ERROR response to 
AT+FTH=3 that the modem either went on-hook or completely reset itself.  
The lack of a response to ATH0 also indicates a modem flaw, but I have 
seen other modems not like ATH0 when the modem is already on-hook.

So it looks like the modem crashed, for some reason.  Upgrade the 
modem's firmware, if available, and then work with the modem 
manufacturer if it happens more.

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*