[hylafax-users] Unspecified Transmit Phase C error; too many attempts to send

["SCIN - Danilo Bottino" <info@xxxxxxx>]

Hi list,

I googled around with no luck.. any ideas on what is happening here?

nov 15 15:15:23.16: [14083]: SESSION BEGIN 000004943 39011043733051
nov 15 15:15:23.16: [14083]: HylaFAX (tm) Version 4.3.0
nov 15 15:15:23.16: [14083]: SEND FAX: JOB 683 DEST 043733051 COMMID 
000004943 DEVICE '/dev/modem' FROM 'cora <******************* USER fax
nov 15 15:15:23.16: [14083]: <-- [12:AT+FCLASS=1\r]
nov 15 15:15:23.18: [14083]: --> [2:OK]
nov 15 15:15:23.18: [14083]: DIAL 043733051
nov 15 15:15:23.18: [14083]: <-- [14:ATDT043733051\r]
nov 15 15:15:35.32: [14083]: --> [7:CONNECT]
nov 15 15:15:37.04: [14083]: --> [2:OK]
nov 15 15:15:37.04: [14083]: REMOTE CSI "PROCAFFE' SPA"
nov 15 15:15:37.04: [14083]: <-- [9:AT+FRH=3\r]
nov 15 15:15:37.06: [14083]: --> [7:CONNECT]
nov 15 15:15:37.34: [14083]: --> [2:OK]
nov 15 15:15:37.34: [14083]: REMOTE best rate 9600 bit/s
nov 15 15:15:37.34: [14083]: REMOTE max B4 page width (255 mm)
nov 15 15:15:37.34: [14083]: REMOTE max unlimited page length
nov 15 15:15:37.34: [14083]: REMOTE best vres 7.7 line/mm
nov 15 15:15:37.34: [14083]: REMOTE format support: MH
nov 15 15:15:37.34: [14083]: REMOTE best 0 ms/scanline
nov 15 15:15:37.34: [14083]: USE 9600 bit/s
nov 15 15:15:37.34: [14083]: SEND file "docq/doc684.ps;c0"
nov 15 15:15:37.34: [14083]: USE A4 page width (215 mm)
nov 15 15:15:37.34: [14083]: USE unlimited page length
nov 15 15:15:37.34: [14083]: USE 3.85 line/mm
nov 15 15:15:37.34: [14083]: USE 1-D MH
nov 15 15:15:37.34: [14083]: USE 0 ms/scanline
nov 15 15:15:37.34: [14083]: SEND training at v.29 9600 bit/s
nov 15 15:15:37.34: [14083]: <-- [9:AT+FRS=7\r]
nov 15 15:15:37.42: [14083]: --> [2:OK]
nov 15 15:15:37.42: [14083]: <-- [9:AT+FTH=3\r]
nov 15 15:15:38.39: [14083]: --> [7:CONNECT]
nov 15 15:15:38.42: [14083]: --> [7:CONNECT]
nov 15 15:15:39.57: [14083]: --> [2:OK]
nov 15 15:15:39.57: [14083]: <-- [9:AT+FTS=7\r]
nov 15 15:15:39.64: [14083]: --> [2:OK]
nov 15 15:15:39.64: [14083]: <-- [10:AT+FTM-\r]
nov 15 15:15:39.65: [14083]: --> [7:CONNECT]
nov 15 15:15:39.65: [14083]: DELAY 400 ms
nov 15 15:15:41.63: [14083]: --> [2:OK]
nov 15 15:15:41.63: [14083]: <-- [9:AT+FRH=3\r]
nov 15 15:15:42.04: [14083]: --> [7:CONNECT]
nov 15 15:15:43.22: [14083]: --> [2:OK]
nov 15 15:15:43.22: [14083]: SEND training at v.29 7200 bit/s
nov 15 15:15:43.22: [14083]: <-- [9:AT+FRS=7\r]
nov 15 15:15:43.30: [14083]: --> [2:OK]
nov 15 15:15:43.30: [14083]: <-- [9:AT+FTH=3\r]
nov 15 15:15:44.27: [14083]: --> [7:CONNECT]
nov 15 15:15:44.30: [14083]: --> [7:CONNECT]
nov 15 15:15:45.44: [14083]: --> [2:OK]
nov 15 15:15:45.44: [14083]: <-- [9:AT+FTS=7\r]
nov 15 15:15:45.51: [14083]: --> [2:OK]
nov 15 15:15:45.51: [14083]: <-- [10:AT+FTMr\r]
nov 15 15:15:45.53: [14083]: --> [7:CONNECT]
nov 15 15:15:45.53: [14083]: DELAY 400 ms
nov 15 15:15:47.51: [14083]: --> [2:OK]
nov 15 15:15:47.51: [14083]: <-- [9:AT+FRH=3\r]
nov 15 15:15:47.92: [14083]: --> [7:CONNECT]
nov 15 15:15:49.10: [14083]: --> [2:OK]
nov 15 15:15:49.10: [14083]: SEND training at v.27ter 4800 bit/s
nov 15 15:15:49.10: [14083]: <-- [9:AT+FRS=7\r]
nov 15 15:15:49.18: [14083]: --> [2:OK]
nov 15 15:15:49.18: [14083]: <-- [9:AT+FTH=3\r]
nov 15 15:15:50.15: [14083]: --> [7:CONNECT]
nov 15 15:15:50.18: [14083]: --> [7:CONNECT]
nov 15 15:15:51.35: [14083]: --> [2:OK]
nov 15 15:15:51.35: [14083]: <-- [9:AT+FTS=7\r]
nov 15 15:15:51.42: [14083]: --> [2:OK]
nov 15 15:15:51.42: [14083]: <-- [10:AT+FTMH\r]
nov 15 15:15:51.44: [14083]: --> [7:CONNECT]
nov 15 15:15:51.44: [14083]: DELAY 400 ms
nov 15 15:15:53.93: [14083]: --> [2:OK]
nov 15 15:15:53.93: [14083]: <-- [9:AT+FRH=3\r]
nov 15 15:15:54.33: [14083]: --> [7:CONNECT]
nov 15 15:15:55.51: [14083]: --> [2:OK]
nov 15 15:15:55.51: [14083]: TRAINING succeeded
nov 15 15:15:55.51: [14083]: DELAY 200 ms
nov 15 15:15:55.71: [14083]: <-- [10:AT+FTMH\r]
nov 15 15:15:55.73: [14083]: --> [7:CONNECT]
nov 15 15:15:55.73: [14083]: DELAY 400 ms
nov 15 15:15:56.13: [14083]: SEND begin page
nov 15 15:15:56.13: [14083]: Reading MMR-compressed image file
nov 15 15:18:08.50: [14083]: MODEM WRITE SHORT: sent 1027, wrote 980
nov 15 15:18:08.50: [14083]: SENT 20625 bytes of data
nov 15 15:18:08.50: [14083]: SEND end page
nov 15 15:18:08.50: [14083]: Unspecified Transmit Phase C error
nov 15 15:18:08.50: [14083]: <-- [9:AT+FTH=3\r]
nov 15 15:18:08.50: [14083]: --> [5:ERROR]
nov 15 15:18:08.50: [14083]: SEND FAILED: JOB 683 DEST 043733051 ERR 
Unspecified Transmit Phase C error; too many attempts to send
nov 15 15:18:08.50: [14083]: <-- [5:ATH0\r]
nov 15 15:18:13.51: [14083]: MODEM <Timeout>
nov 15 15:18:43.52: [14083]: SESSION END



_________________________________
Danilo Bottino - SCIN Servizi Informatici
Tel. 011/9242690
Cel. 333/2290918
Fax 011/9242922
info@xxxxxxx - www.scin.it 


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*