Re: [hylafax-users] hylafax does not answer rings

[Lívio Cipriano <lcipriano@xxxxxx>]

Well... so the problem is not with Hylafax, but at the isdn or capi level.

Please make

ps -aux

and send me the result, so I can inspect what are the running processes.

The reason that I installed Hylfax, was because I've several computers and I 
need to send faxes from them all. If you only need to send faxes from one 
computer, capisuite it's ok for the job and much easy to install and menage. 
When I installed it, it runned at the first try... so..

LC

----- Original Message -----
Hi,

that is right. Capisuit i have not tried why?

Am Montag, 10. Juli 2006 21:43 schrieb Lívio Cipriano:
> So you didn't ear a whistle, when you call your fax number from your
> mobile?
>
> Before you install hylafax, did you tried capisuite?
>
> LC
>
> ----- Original Message -----
> I tried this bevor, but tried it again,
>
> no change
>
> Steve
>
> Am Montag, 10. Juli 2006 20:52 schrieb Lívio Cipriano:
> > Ok... That was what I expected...
> >
> > Try to change
> >
> > AcceptSpeech:           0
> >
> > to
> >
> > AcceptSpeech:           1
> >
> > restart the computer, try to call again and tell me the result.
> >
> > Livio Cipriano
> >
> > ----- Original Message -----
> > The sysconfig tells the same as befor.
> >
> > On the phone I hear nothing, and get the Message:
> > Nicht erreichbar (not available).
> >
> > Steve
> >
> > Am Montag, 10. Juli 2006 20:08 schrieb Lívio Cipriano:
> > > Hi Steve,
> > >
> > > Try to call your fax number from a cell phone and tell me what do you
> > > ear or what kind of respond do you obtain.
> > >
> > > Lívio Cipriano
> > >
> > > ----- Original Message -----
> > > Hi,
> > >
> > > yes debian installs everything to /var/spool/hylafax. /var/spool/fax I
> > > don't hava as directory.
> > >
> > > Am Montag, 10. Juli 2006 19:48 schrieb Lívio Cipriano:
> > > > Sorry another "stupid question", but SuSE sets the root of hylfax as
> > > > "/var/spool/fax" and I notice that your config file mention the
> > > > several files as having the root of hylafax at "/var/spool/hylafax".
> > > > It this controlled?
> > > >
> > > > Livio Cipriano
> > > >
> > > > ----- Original Message -----
> > > > Hallo Livio,
> > > >
> > > > i changed everything restarted the computer and still the same. The
> > > > call is mentioned in the syslog, and ignored.
> > > >
> > > > Steve
> > > >
> > > > Am Montag, 10. Juli 2006 18:53 schrieb Lívio Cipriano:
> > > > > Hi
> > > > >
> > > > > There are some differences between our config files. My config
> > > > >
> > > > > LogFacility:		daemon
> > > > > CountryCode:		351
> > > > > AreaCode:		1
> > > > > LongDistancePrefix:	1
> > > > > InternationalPrefix:	00
> > > > > DialStringRules:	"etc/dialrules"
> > > > > ServerTracing:		1
> > > > > SessionTracing:		0xffffffff
> > > > > MaxConcurrentCalls:	2
> > > > > MaxSendPages:		1024
> > > > > ModemGroup:		any:.*
> > > > > SendFaxCmd:		/var/spool/fax/bin/faxsend
> > > > >
> > > > > From memory, I remember that ModemGroup was very importante, but I
> > > > > can remember why.
> > > > >
> > > > > My config.faxCAPI was 3 main differences
> > > > >
> > > > > # "FaxRcvdCmd" gibt das Skript an, das ausgefhrt wird, sobald ein
> > > > > Fax # empfangen wurde. Im Stand-Alone-Betrieb werden andere
> > > > > Parameter # bergeben als fr HylaFAX (mehr dazu im sample_faxrcvd).
> > > > > #
> > > > > # "FaxRcvdCmd" indicates the script performed whenever a fax is
> > > > > # received. Parameters other than the ones for HylaFAX are returned
> > > > > in # stand-alone operation (see sample_faxrcvd for more
> > > > > information). #
> > > > > # default   /var/spool/hylafax/bin/faxrcvd
> > > > > #
> > > > > FaxRcvdCmd:		/var/spool/fax/bin/faxrcvd
> > > > >
> > > > >
> > > > > # "PollRcvdCmd" gibt das Skript an, das ausgefhrt wird, sobald ein
> > > > > # Fax per Faxabruf empfangen wurde. Im Stand-Alone-Betrieb werden
> > > > > # andereParameter bergeben als fr HylaFAX (mehr dazu im
> > > > > # sample_faxrcvd).
> > > > > #
> > > > > # "PollRcvdCmd" indicates the script performed whenever a fax was
> > > > > # received by fax polling. Parameters other than the ones for
> > > > > HylaFAX # are returned in stand-alone operation (see sample_faxrcvd
> > > > > for more # information).
> > > > > #
> > > > > # default   /var/spool/hylafax/bin/pollrcvd
> > > > > #
> > > > > PollRcvdCmd:             /var/spool/fax/bin/pollrcvd
> > > > >
> > > > > I have a FaxRcvdCmd. I don't use the Poll mode, so I can't help you
> > > > > there. Can that be a reason? And my
> > > > >
> > > > > # "FaxReceiveUser" is the user when c2faxrecv is run. This user can
> > > > > be # changed only by the Superuser or "root" user. If c2faxrecv is
> > > > > started by # another user, this entry will be ignored. Here it is a
> > > > > good idea to enter a # value other than the hylafax default value
> > > > > "fax", for instance, if the # rights of /dev/capi20 are not to be
> > > > > changed or your Linux distribution # requires another user.
> > > > > #
> > > > > # default   ""
> > > > > #
> > > > > FaxReceiveUser:         root #fax
> > > > >
> > > > > is root. As far as I can remember, I had to supply the
> > > > > faxreceiveuser root, cause the different components (device,
> > > > > hylafax, capi, etc..) have different users and groups, so that was
> > > > > the only way that they worked together.
> > > > >
> > > > > Lívio Cipriano
> > > > >
> > > > > ----- Original Message -----
> > > > > Hi,
> > > > >
> > > > > since I'm trying on this for 3d now, there are no obvious
> > > > > questions, because I really don't know what is wrong!
> > > > >
> > > > > Am Montag, 10. Juli 2006 17:57 schrieb Lívio Cipriano:
> > > > > > Hi,
> > > > > >
> > > > > > Your dev must be /dev/isdnctrl1:
> > > > >
> > > > > Ok that.
> > > > >
> > > > > > "kcapi: Controller 1: fcpci-d000-201 attached"
> > > > > >
> > > > > > You don't have to link anything. Let me put you some questions,
> > > > > > even if to obvious:
> > > > > >
> > > > > > Are you doing the instalation and testing it logged as root?;
> > > > >
> > > > > yes I'm root on the system
> > > > >
> > > > > > Do you have, under fax/etc/ the config and config.faxCAPI files?
> > > > >
> > > > > yes I have
> > > > >
> > > > > > After changing those files, do you reboot the host?
> > > > >
> > > > > i tried bouth
> > > > >
> > > > > for sure I put the mail Aspects of the config file here:
> > > > >
> > > > > config:
> > > > > #ContCoverPage:         "etc/cover.templ"
> > > > > #DestControls:          "etc/destctrls"
> > > > > #DialStringRules:       "etc/dialrules"
> > > > > #QualifyCID:            "etc/cid"
> > > > > #QualifyTSI:            "etc/tsi"
> > > > > #ServerTracing:         0x08501
> > > > > InternationalPrefix:    00
> > > > > SendFaxCmd:             /usr/bin/c2faxsend
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > config.faxCAPI
> > > > >
> > > > > SpoolDir:               /var/spool/hylafax
> > > > > PollRcvdCmd:             /var/spool/hylafax/bin/pollrcvd
> > > > > FaxReceiveUser:         uucp
> > > > > FaxReceiveGroup:        dialout
> > > > > LogFile:                /var/spool/hylafax/log/capi4hylafax
> > > > > LogTraceLevel:          4
> > > > > LogFileMode:            0600
> > > > > HylafaxDeviceName:          faxCAPI it is liked s.d.
> > > > > RecvFileMode:               0600
> > > > > # ----------- incoming params -----------
> > > > > Controller:             1
> > > > > AcceptSpeech:           0
> > > > > UseDDI:                 0
> > > > > IncomingMSNs: faxnumber
> > > > > AcceptGlobalCall:   1
> > > > >
> > > > >
> > > > > babylon5:/dev# tail -f /var/spool/hylafax/log/capi4hylafax
> > > > >
> > > > > Device "faxCAPI" uses 2 receive thread(s) with the following
> > > > > config: Jul 10 18:32:50.32: [ 7896]: c2faxrecv - INFO: Controller=1
> > > > >
> > > > > : IncomingMSNs=fuxnumber
> > > > >
> > > > > Jul 10 18:32:50.32: [ 7896]: c2faxrecv - INFO:
> > > > >
> > > > > So I hope I didn't vorget someting :-)
> > > > >
> > > > > ____________________ HylaFAX(tm) Users Mailing List
> > > > > _______________________ To subscribe/unsubscribe, click
> > > > > http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s
> > > > > unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn
> > > > > about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
> > > > >
> > > > > ____________________ HylaFAX(tm) Users Mailing List
> > > > > _______________________ To subscribe/unsubscribe, click
> > > > > http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s
> > > > > unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn
> > > > > about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
> > > >
> > > > ____________________ HylaFAX(tm) Users Mailing List
> > > > _______________________ To subscribe/unsubscribe, click
> > > > http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s
> > > > unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn
> > > > about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
> > >
> > > ____________________ HylaFAX(tm) Users Mailing List
> > > _______________________ To subscribe/unsubscribe, click
> > > http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe
> > > hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about
> > > commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
> >
> > ____________________ HylaFAX(tm) Users Mailing List
> > _______________________ To subscribe/unsubscribe, click
> > http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe
> > hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial
> > HylaFAX(tm) support, mail sales@xxxxxxxxx*
>
> ____________________ HylaFAX(tm) Users Mailing List _______________________
>   To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
>   *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*