HylaFAX The world's most advanced open source fax server
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] hylafax does not answer rings

Ah ok,

but since i have 2 Computers here which shoud send Faxex through the server, i 
have to use hylafax :-(

ps -ax : 


4045 ?        Ssl    0:01 /usr/sbin/named -u bind
 4078 ?        Ss     
0:00 /usr/sbin/openvpn --writepid /var/run/openvpn.HomeNet.pid --daemon 
ovpn-HomeNet --cd /etc/openvpn --config /etc/openvpn/HomeNet.conf
 4145 ?        Ss     
0:00 /usr/sbin/acpid -c /etc/acpi/events -s /var/run/acpid.socket
 4153 ?        Ss     0:00 /usr/sbin/cupsd
 4194 ?        Ss     0:00 /usr/sbin/exim4 -bd -q30m
 6611 ?        S      0:00 /usr/sbin/iprofd /etc/isdn/iprofd.data
 6615 ?        S      
0:00 /usr/sbin/isdnlog -D -f/etc/isdn/isdnlog.isdnctrl0 /dev/isdnctrl0
 6622 ?        Ss     0:00 /usr/sbin/lpd -s
 6647 ?        S      0:00 /bin/sh /usr/bin/mysqld_safe
 6708 ?        Sl     
0:00 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --user=mysql --pid-file=/var/run/mysqld/mysqld.pid --skip-locking --port=3306 --so
 6709 ?        S      0:00 logger -p daemon.err -t mysqld_safe -i -t mysqld
 6790 ?        S<     0:00 [nfsd4]
 6791 ?        S      0:00 [nfsd]
 6792 ?        S      0:00 [nfsd]
 6793 ?        S      0:00 [nfsd]
 6794 ?        S      0:00 [nfsd]
 6795 ?        S      0:00 [nfsd]
 6796 ?        S      0:00 [nfsd]
 6797 ?        S      0:00 [nfsd]
 6798 ?        S      0:00 [nfsd]
 6800 ?        S      0:00 [lockd]
 6801 ?        S<     0:00 [rpciod/0]
 6804 ?        Ss     0:00 /usr/sbin/rpc.mountd
 6810 ?        Ss     0:00 /usr/sbin/inetd
 6813 ?        Ss     0:00 /usr/sbin/nmbd -D
 6815 ?        Ss     0:00 /usr/sbin/smbd -D
 6821 ?        Ss     0:00 /usr/sbin/slpd
 6824 ?        S      0:00 /usr/sbin/smbd -D
 6826 ?        S      0:00 /usr/sbin/smartd --pidfile /var/run/smartd.pid
 6832 ?        Ss     0:00 /usr/sbin/sshd
 6891 ?        Ss     0:00 /sbin/rpc.statd
 6910 ?        Ss     0:00 /usr/sbin/dhcpd3 -q eth1
 6919 ?        Ss     0:00 /usr/sbin/atd
 6925 ?        Ss     0:00 /usr/sbin/cron
 6940 ?        Ss     0:00 /usr/sbin/apache2 -k start -DSSL
 6971 ?        S      0:00 /usr/sbin/apache2 -k start -DSSL
 6972 ?        S      0:00 /usr/sbin/apache2 -k start -DSSL
 6973 ?        S      0:00 /usr/sbin/apache2 -k start -DSSL
 6974 ?        S      0:00 /usr/sbin/apache2 -k start -DSSL
 6975 ?        S      0:00 /usr/sbin/apache2 -k start -DSSL
 7097 ?        Ss     0:00 ipppd ippp0 192.168.99.1:192.168.99.2 
auth -defaultroute
 7112 tty1     Ss+    0:00 /sbin/getty 38400 tty1
 7113 tty2     Ss+    0:00 /sbin/getty 38400 tty2
 7114 tty3     Ss+    0:00 /sbin/getty 38400 tty3
 7115 tty4     Ss+    0:00 /sbin/getty 38400 tty4
 7116 tty5     Ss+    0:00 /sbin/getty 38400 tty5
 7117 tty6     Ss+    0:00 /sbin/getty 38400 tty6
 7128 ?        Rs     0:00 sshd: root@pts/0
 7130 pts/0    Ss     0:00 -bash
 7248 ?        Ss     0:00 /usr/sbin/faxq                                                                                                              
7250 ?        Ss     0:00 /usr/sbin/hfaxd -i 4559
 7273 ?        Ssl    0:00 /usr/bin/c2faxrecv
 7357 ?        S      0:00 /usr/sbin/smbd -D
 7361 pts/0    R+     0:00 ps -ax

I ope this helps.

Steve


Am Montag, 10. Juli 2006 22:48 schrieb Lívio Cipriano:
> Well... so the problem is not with Hylafax, but at the isdn or capi level.
>
> Please make
>
> ps -aux
>
> and send me the result, so I can inspect what are the running processes.
>
> The reason that I installed Hylfax, was because I've several computers and
> I need to send faxes from them all. If you only need to send faxes from one
> computer, capisuite it's ok for the job and much easy to install and
> menage. When I installed it, it runned at the first try... so..
>
> LC
>
> ----- Original Message -----
> Hi,
>
> that is right. Capisuit i have not tried why?
>
> Am Montag, 10. Juli 2006 21:43 schrieb Lívio Cipriano:
> > So you didn't ear a whistle, when you call your fax number from your
> > mobile?
> >
> > Before you install hylafax, did you tried capisuite?
> >
> > LC
> >
> > ----- Original Message -----
> > I tried this bevor, but tried it again,
> >
> > no change
> >
> > Steve
> >
> > Am Montag, 10. Juli 2006 20:52 schrieb Lívio Cipriano:
> > > Ok... That was what I expected...
> > >
> > > Try to change
> > >
> > > AcceptSpeech:           0
> > >
> > > to
> > >
> > > AcceptSpeech:           1
> > >
> > > restart the computer, try to call again and tell me the result.
> > >
> > > Livio Cipriano
> > >
> > > ----- Original Message -----
> > > The sysconfig tells the same as befor.
> > >
> > > On the phone I hear nothing, and get the Message:
> > > Nicht erreichbar (not available).
> > >
> > > Steve
> > >
> > > Am Montag, 10. Juli 2006 20:08 schrieb Lívio Cipriano:
> > > > Hi Steve,
> > > >
> > > > Try to call your fax number from a cell phone and tell me what do you
> > > > ear or what kind of respond do you obtain.
> > > >
> > > > Lívio Cipriano
> > > >
> > > > ----- Original Message -----
> > > > Hi,
> > > >
> > > > yes debian installs everything to /var/spool/hylafax. /var/spool/fax
> > > > I don't hava as directory.
> > > >
> > > > Am Montag, 10. Juli 2006 19:48 schrieb Lívio Cipriano:
> > > > > Sorry another "stupid question", but SuSE sets the root of hylfax
> > > > > as "/var/spool/fax" and I notice that your config file mention the
> > > > > several files as having the root of hylafax at
> > > > > "/var/spool/hylafax". It this controlled?
> > > > >
> > > > > Livio Cipriano
> > > > >
> > > > > ----- Original Message -----
> > > > > Hallo Livio,
> > > > >
> > > > > i changed everything restarted the computer and still the same. The
> > > > > call is mentioned in the syslog, and ignored.
> > > > >
> > > > > Steve
> > > > >
> > > > > Am Montag, 10. Juli 2006 18:53 schrieb Lívio Cipriano:
> > > > > > Hi
> > > > > >
> > > > > > There are some differences between our config files. My config
> > > > > >
> > > > > > LogFacility:		daemon
> > > > > > CountryCode:		351
> > > > > > AreaCode:		1
> > > > > > LongDistancePrefix:	1
> > > > > > InternationalPrefix:	00
> > > > > > DialStringRules:	"etc/dialrules"
> > > > > > ServerTracing:		1
> > > > > > SessionTracing:		0xffffffff
> > > > > > MaxConcurrentCalls:	2
> > > > > > MaxSendPages:		1024
> > > > > > ModemGroup:		any:.*
> > > > > > SendFaxCmd:		/var/spool/fax/bin/faxsend
> > > > > >
> > > > > > From memory, I remember that ModemGroup was very importante, but
> > > > > > I can remember why.
> > > > > >
> > > > > > My config.faxCAPI was 3 main differences
> > > > > >
> > > > > > # "FaxRcvdCmd" gibt das Skript an, das ausgefhrt wird, sobald ein
> > > > > > Fax # empfangen wurde. Im Stand-Alone-Betrieb werden andere
> > > > > > Parameter # bergeben als fr HylaFAX (mehr dazu im
> > > > > > sample_faxrcvd). #
> > > > > > # "FaxRcvdCmd" indicates the script performed whenever a fax is
> > > > > > # received. Parameters other than the ones for HylaFAX are
> > > > > > returned in # stand-alone operation (see sample_faxrcvd for more
> > > > > > information). #
> > > > > > # default   /var/spool/hylafax/bin/faxrcvd
> > > > > > #
> > > > > > FaxRcvdCmd:		/var/spool/fax/bin/faxrcvd
> > > > > >
> > > > > >
> > > > > > # "PollRcvdCmd" gibt das Skript an, das ausgefhrt wird, sobald
> > > > > > ein # Fax per Faxabruf empfangen wurde. Im Stand-Alone-Betrieb
> > > > > > werden # andereParameter bergeben als fr HylaFAX (mehr dazu im
> > > > > > # sample_faxrcvd).
> > > > > > #
> > > > > > # "PollRcvdCmd" indicates the script performed whenever a fax was
> > > > > > # received by fax polling. Parameters other than the ones for
> > > > > > HylaFAX # are returned in stand-alone operation (see
> > > > > > sample_faxrcvd for more # information).
> > > > > > #
> > > > > > # default   /var/spool/hylafax/bin/pollrcvd
> > > > > > #
> > > > > > PollRcvdCmd:             /var/spool/fax/bin/pollrcvd
> > > > > >
> > > > > > I have a FaxRcvdCmd. I don't use the Poll mode, so I can't help
> > > > > > you there. Can that be a reason? And my
> > > > > >
> > > > > > # "FaxReceiveUser" is the user when c2faxrecv is run. This user
> > > > > > can be # changed only by the Superuser or "root" user. If
> > > > > > c2faxrecv is started by # another user, this entry will be
> > > > > > ignored. Here it is a good idea to enter a # value other than the
> > > > > > hylafax default value "fax", for instance, if the # rights of
> > > > > > /dev/capi20 are not to be changed or your Linux distribution #
> > > > > > requires another user. #
> > > > > > # default   ""
> > > > > > #
> > > > > > FaxReceiveUser:         root #fax
> > > > > >
> > > > > > is root. As far as I can remember, I had to supply the
> > > > > > faxreceiveuser root, cause the different components (device,
> > > > > > hylafax, capi, etc..) have different users and groups, so that
> > > > > > was the only way that they worked together.
> > > > > >
> > > > > > Lívio Cipriano
> > > > > >
> > > > > > ----- Original Message -----
> > > > > > Hi,
> > > > > >
> > > > > > since I'm trying on this for 3d now, there are no obvious
> > > > > > questions, because I really don't know what is wrong!
> > > > > >
> > > > > > Am Montag, 10. Juli 2006 17:57 schrieb Lívio Cipriano:
> > > > > > > Hi,
> > > > > > >
> > > > > > > Your dev must be /dev/isdnctrl1:
> > > > > >
> > > > > > Ok that.
> > > > > >
> > > > > > > "kcapi: Controller 1: fcpci-d000-201 attached"
> > > > > > >
> > > > > > > You don't have to link anything. Let me put you some questions,
> > > > > > > even if to obvious:
> > > > > > >
> > > > > > > Are you doing the instalation and testing it logged as root?;
> > > > > >
> > > > > > yes I'm root on the system
> > > > > >
> > > > > > > Do you have, under fax/etc/ the config and config.faxCAPI
> > > > > > > files?
> > > > > >
> > > > > > yes I have
> > > > > >
> > > > > > > After changing those files, do you reboot the host?
> > > > > >
> > > > > > i tried bouth
> > > > > >
> > > > > > for sure I put the mail Aspects of the config file here:
> > > > > >
> > > > > > config:
> > > > > > #ContCoverPage:         "etc/cover.templ"
> > > > > > #DestControls:          "etc/destctrls"
> > > > > > #DialStringRules:       "etc/dialrules"
> > > > > > #QualifyCID:            "etc/cid"
> > > > > > #QualifyTSI:            "etc/tsi"
> > > > > > #ServerTracing:         0x08501
> > > > > > InternationalPrefix:    00
> > > > > > SendFaxCmd:             /usr/bin/c2faxsend
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > config.faxCAPI
> > > > > >
> > > > > > SpoolDir:               /var/spool/hylafax
> > > > > > PollRcvdCmd:             /var/spool/hylafax/bin/pollrcvd
> > > > > > FaxReceiveUser:         uucp
> > > > > > FaxReceiveGroup:        dialout
> > > > > > LogFile:                /var/spool/hylafax/log/capi4hylafax
> > > > > > LogTraceLevel:          4
> > > > > > LogFileMode:            0600
> > > > > > HylafaxDeviceName:          faxCAPI it is liked s.d.
> > > > > > RecvFileMode:               0600
> > > > > > # ----------- incoming params -----------
> > > > > > Controller:             1
> > > > > > AcceptSpeech:           0
> > > > > > UseDDI:                 0
> > > > > > IncomingMSNs: faxnumber
> > > > > > AcceptGlobalCall:   1
> > > > > >
> > > > > >
> > > > > > babylon5:/dev# tail -f /var/spool/hylafax/log/capi4hylafax
> > > > > >
> > > > > > Device "faxCAPI" uses 2 receive thread(s) with the following
> > > > > > config: Jul 10 18:32:50.32: [ 7896]: c2faxrecv - INFO:
> > > > > > Controller=1
> > > > > >
> > > > > > : IncomingMSNs=fuxnumber
> > > > > >
> > > > > > Jul 10 18:32:50.32: [ 7896]: c2faxrecv - INFO:
> > > > > >
> > > > > > So I hope I didn't vorget someting :-)
> > > > > >
> > > > > > ____________________ HylaFAX(tm) Users Mailing List
> > > > > > _______________________ To subscribe/unsubscribe, click
> > > > > > http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s
> > > > > > unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To
> > > > > > learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
> > > > > >
> > > > > > ____________________ HylaFAX(tm) Users Mailing List
> > > > > > _______________________ To subscribe/unsubscribe, click
> > > > > > http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s
> > > > > > unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To
> > > > > > learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
> > > > >
> > > > > ____________________ HylaFAX(tm) Users Mailing List
> > > > > _______________________ To subscribe/unsubscribe, click
> > > > > http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s
> > > > > unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn
> > > > > about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
> > > >
> > > > ____________________ HylaFAX(tm) Users Mailing List
> > > > _______________________ To subscribe/unsubscribe, click
> > > > http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s
> > > > unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn
> > > > about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
> > >
> > > ____________________ HylaFAX(tm) Users Mailing List
> > > _______________________ To subscribe/unsubscribe, click
> > > http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe
> > > hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about
> > > commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
> >
> > ____________________ HylaFAX(tm) Users Mailing List
> > _______________________ To subscribe/unsubscribe, click
> > http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe
> > hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial
> > HylaFAX(tm) support, mail sales@xxxxxxxxx*
>
> ____________________ HylaFAX(tm) Users Mailing List _______________________
>   To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
>   *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*

Project hosted by iFAX Solutions