Re: [hylafax-users] Problem Receiving Faxes

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

Mariano Guelar wrote:

> I used to have hylafax 4.2.1 but I upgraded the RPM to the last one:
>
> [root@FAX log]# rpm -qa |grep hylafax
> hylafax-4.3.0-2fc4
>  

Okay.  This is 4.3.0-2 and not 4.3.0.2 ... there is a difference.  Not 
that it would make a difference for this matter, though.

> Jul 10 16:47:47.22: [14876]: <-- [9:AT+FRH=3\r]
> Jul 10 16:47:52.20: [14876]: --> [2:OK]
>  

This OK after AT+FRH=3 without a CONNECT is just plain whacky behavior 
from the modem.  It is supposed to respond CONNECT before OK.  And 
without OK it can only respond ERROR (per the spec)... although we see 
other modems report NO CARRIER, also (in cases where a hangup is 
detected).  In any other case it should just sit there happily waiting 
and waiting and waiting for a V.21 carrier.

> Jul 10 16:47:57.01: [14876]: <-- [9:AT+FRH=3\r]
> Jul 10 16:47:59.24: [14876]: --> [7:CONNECT]
> Jul 10 16:48:01.01: [14876]: --> [2:10 03]
> Jul 10 16:48:01.01: [14876]: --> [2:OK]
> Jul 10 16:48:01.01: [14876]: HDLC frame too short (0 bytes)

Yeah, okay.  Now we know what that is.  But it doesn't help us much.  
Something seems not right with the modem.  You may want to try a 
different one.

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*