Re: [hylafax-users] hylafax does not answer rings

[Lívio Cipriano <lcipriano@xxxxxx>]

Like I told you, in my instalation (SuSE 9.2) it's "/dev/isdnctrl1". I think 
that in yours must be the same, because you must be using the proprietary 
driver of AVM, are you?

Check the startup log with dmesg to see what is happen whem the driver is 
loaded.

Lívio Cipriano

----- Original Message -----
Ah ok,

I tried a little bit an you are right. /dev/capi20 has no device connected.
 So the question ist, where das the fcpci-driver connect to? How can I find
 this out?

Steve

Am Montag, 10. Juli 2006 16:22 schrieb Lívio Cipriano:
> Hi Steve,
>
> I'm using a SuSE 9.2 instalation and my physical device is /dev/isdnctrl1.
> I think that capi20 is just a virtual device. The setup instructions of
> capi4hylafax says that we should use faxCAPI as the hylafax device. Is it
> different for Debian?
>
> Livio Cipriano
>
> ----- Original Message -----
> Hallo,
>
> I checked your config, an exept that I use capi20 as device and of course
> other Area-Codes I have the same configuration. But I also changed
> everything to your configs (dev and user root) but the result was the same.
> I get an notification, but It does not go off-hook and The ISDN-Service
> says not available :-(
>
> Hi Steve,
>
>
> Seams that you have the same hylafax instalation. I also have a AVM Card
> and it took a lot of time setting up the hylafax server, but now it's
> running and I setup up 1 outgoing number and 2 incoming.
>
> Let me sending you my config files, that you can study and adapt.
>
> Let me know if it helped.
>
> Regards
>
> Livio Cipriano
>
> >>CONFIG
> >>-------------------------------------------------------------------
> >>LogFacility: daemon
> >>CountryCode: 351
> >>AreaCode: 1
> >>LongDistancePrefix: 1
> >>InternationalPrefix: 00
> >>DialStringRules: "etc/dialrules"
> >>ServerTracing: 1
> >>SessionTracing: 0xffffffff
> >>MaxConcurrentCalls: 2
> >>MaxSendPages: 1024
> >>ModemGroup: any:.*
> >>SendFaxCmd: /var/spool/fax/bin/faxsend
> >>
> >>
> >>CONFIG.faxCAPI
> >>------------------------------------------------------------------
> >>
> >>PollRcvdCmd: /var/spool/fax/bin/pollrcvd
> >>FaxReceiveUser: root #fax
> >>FaxReceiveGroup: dialout
> >>LogFile: /var/spool/fax/log/capifax.log
> >>LogTraceLevel: 4
> >>LogFileMode: 0600
> >>{
> >> #
> >> HylafaxDeviceName: faxCAPI
> >> RecvFileMode: 0600
> >> #
> >> FAXNumber: "123456789"
> >> #
> >> LocalIdentifier: "XXX"
> >> MaxConcurrentRecvs: 2
> >>
> >> # ----------- outgoing params -----------
> >>
> >> OutgoingController: 1
> >> OutgoingMSN: 123456789
> >> SuppressMSN: 0
> >> NumberPrefix:
> >> UseISDNFaxService: 0
> >> RingingDuration: 0
> >>
> >> # ----------- incoming params -----------
> >> {
> >>
> >> Controller: 1
> >> AcceptSpeech: 0
> >> UseDDI: 0
> >> DDIOffset:
> >> DDILength:
> >> IncomingDDIs:
> >> IncomingMSNs: 123456789,987654321
> >> AcceptGlobalCall: 0
> >> }
> >>}
>
> ----- Original Message -----
> Hallo,
>
> I'm trying to set up an hylafax server on an dial-in ISDN server using an
> passiv AVM PCI Fritz Card
>
> According to HOWTOs found in the www I first set up the cap-driver wich no
> seems to work properly
>
> capiinfo says:
> --------------------------------------------------------
> Number of Controllers : 1
> Controller 1:
> Manufacturer: AVM GmbH
> CAPI Version: 2.0
> Manufacturer Version: 3.11-07 (49.23)
> Serial Number: 1000001
> BChannels: 2
> Global Options: 0x00000039
> internal controller supported
> DTMF supported
> Supplementary Services supported
> channel allocation supported (leased lines)
> B1 protocols support: 0x4000011f
> 64 kbit/s with HDLC framing
> 64 kbit/s bit-transparent operation
> V.110 asynconous operation with start/stop byte framing
> V.110 synconous operation with HDLC framing
> T.30 modem for fax group 3
> Modem asyncronous operation with start/stop byte framing
> B2 protocols support: 0x00000b1b
> ISO 7776 (X.75 SLP)
> Transparent
> LAPD with Q.921 for D channel X.25 (SAPI 16)
> T.30 for fax group 3
> ISO 7776 (X.75 SLP) with V.42bis compression
> V.120 asyncronous mode
> V.120 bit-transparent mode
> B3 protocols support: 0x800000bf
> Transparent
> T.90NL, T.70NL, T.90
> ISO 8208 (X.25 DTE-DTE)
> X.25 DCE
> X.25 DCE
> T.30 for fax group 3
> T.30 for fax group 3 with extensions
> Modem
>
> 0100
> 0200
> 39000000
> 1f010040
> 1b0b0000
> bf000080
> 00000000 00000000 00000000 00000000 00000000 00000000
> 01000001 00020000 00000000 00000000 00000000
>
> Supplementary services support: 0x000003ff
> Hold / Retrieve
> Terminal Portability
> ECT
> 3PTY
> Call Forwarding
> Call Deflection
> MCID
> CCBS
> ------------------------------------------
>
> so this seems to work.
>
> Next I setup the dialin usin ipppd which also wors, since the dial in is
> possible :-)
>
> Next was to setup hylafax.
>
> hylafax and capi4hylafax are installed and setup to the faxnumer. I changed
> the capi Driver from capiFAX to capi20 since this is the /dev an debian.
>
> than I start capi4hylafax and haylafax it self an they come ok correctly.
>
> But as an ring comes in nothing happens :-(
>
> /usr/bin/c2faxrecv runs
>
> in the log files is written:
>
> ------------------------
> ul 10 09:53:34.83: [32076]: c2faxrecv - INFO:
> C4H-Version 01.03.01svn (32Bit).
>
> Jul 10 09:53:34.83: [32076]: c2faxrecv - INFO: The SpoolDirectory
> is /var/spool/hylafax.
> Jul 10 09:53:34.83: [32076]: c2faxrecv - INFO: Changed to effective
> user "uucp" and group "dialout" succesfully.
> Jul 10 09:53:34.83: [32076]: c2faxrecv - INFO:
> Device "capi20" uses 2 receive thread(s) with the following config:
> Jul 10 09:53:34.83: [32076]: c2faxrecv - INFO: Controller=1 : accept all
> Jul 10 09:53:34.83: [32076]: c2faxrecv - INFO:
> Started in Hylafax mode and waiting on incoming calls.
> ------------------------
>
> so this is really online
>
> As an Ring comes in, syslog says:
>
> ------------------------
> FaxQueuer[32189]: HylaFAX (tm) Version 4.3.0
> FaxQueuer[32189]: Copyright (c) 1990-1996 Sam Leffler
> FaxQueuer[32189]: Copyright (c) 1991-1996 Silicon Graphics, Inc.
> HylaFAX[32191]: HylaFAX INET Protocol Server: restarted.
> Kernel: capidrv-1: incoming call incommingnumber,1,1,faxnumber
> kernel: capidrv-1: patching si2=1 to 0 for VBOX
> kernel: isdn_net: call from incommingnumber -> 0 faxnumber ignored
> kernel: isdn_tty: call from incommingnumber -> faxnumber ignored
> kernel: capidrv-1: incoming call incommingnumber,1,0,faxnumber ignored
> ------------------------
>
> So why is it ignored?
>
> TNX for all hints, and sorry for my englisch, it has been a while I had to
> write :-)
>
> Steve
>
> ____________________ HylaFAX(tm) Users Mailing List _______________________
> To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
> On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
> *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
>
> ____________________ HylaFAX(tm) Users Mailing List _______________________
> To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
> On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
> *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
>
> ____________________ HylaFAX(tm) Users Mailing List _______________________
>   To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
>   *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
>
> ____________________ HylaFAX(tm) Users Mailing List _______________________
>   To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
>   *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*