Re: [hylafax-users] hylafax does not answer rings

[Steve-Kai Vyska <steve@xxxxxxxx>]

The sysconfig tells the same as befor.

On the phone I hear nothing, and get the Message:
Nicht erreichbar (not available).

Steve

Am Montag, 10. Juli 2006 20:08 schrieb Lívio Cipriano:
> Hi Steve,
>
> Try to call your fax number from a cell phone and tell me what do you ear
> or what kind of respond do you obtain.
>
> Lívio Cipriano
>
> ----- Original Message -----
> Hi,
>
> yes debian installs everything to /var/spool/hylafax. /var/spool/fax I
> don't hava as directory.
>
> Am Montag, 10. Juli 2006 19:48 schrieb Lívio Cipriano:
> > Sorry another "stupid question", but SuSE sets the root of hylfax as
> > "/var/spool/fax" and I notice that your config file mention the several
> > files as having the root of hylafax at "/var/spool/hylafax". It this
> > controlled?
> >
> > Livio Cipriano
> >
> > ----- Original Message -----
> > Hallo Livio,
> >
> > i changed everything restarted the computer and still the same. The call
> > is mentioned in the syslog, and ignored.
> >
> > Steve
> >
> > Am Montag, 10. Juli 2006 18:53 schrieb Lívio Cipriano:
> > > Hi
> > >
> > > There are some differences between our config files. My config
> > >
> > > LogFacility:		daemon
> > > CountryCode:		351
> > > AreaCode:		1
> > > LongDistancePrefix:	1
> > > InternationalPrefix:	00
> > > DialStringRules:	"etc/dialrules"
> > > ServerTracing:		1
> > > SessionTracing:		0xffffffff
> > > MaxConcurrentCalls:	2
> > > MaxSendPages:		1024
> > > ModemGroup:		any:.*
> > > SendFaxCmd:		/var/spool/fax/bin/faxsend
> > >
> > > From memory, I remember that ModemGroup was very importante, but I can
> > > remember why.
> > >
> > > My config.faxCAPI was 3 main differences
> > >
> > > # "FaxRcvdCmd" gibt das Skript an, das ausgefhrt wird, sobald ein Fax
> > > # empfangen wurde. Im Stand-Alone-Betrieb werden andere Parameter
> > > # bergeben als fr HylaFAX (mehr dazu im sample_faxrcvd).
> > > #
> > > # "FaxRcvdCmd" indicates the script performed whenever a fax is
> > > # received. Parameters other than the ones for HylaFAX are returned in
> > > # stand-alone operation (see sample_faxrcvd for more information).
> > > #
> > > # default   /var/spool/hylafax/bin/faxrcvd
> > > #
> > > FaxRcvdCmd:		/var/spool/fax/bin/faxrcvd
> > >
> > >
> > > # "PollRcvdCmd" gibt das Skript an, das ausgefhrt wird, sobald ein
> > > # Fax per Faxabruf empfangen wurde. Im Stand-Alone-Betrieb werden
> > > # andereParameter bergeben als fr HylaFAX (mehr dazu im
> > > # sample_faxrcvd).
> > > #
> > > # "PollRcvdCmd" indicates the script performed whenever a fax was
> > > # received by fax polling. Parameters other than the ones for HylaFAX
> > > # are returned in stand-alone operation (see sample_faxrcvd for more
> > > # information).
> > > #
> > > # default   /var/spool/hylafax/bin/pollrcvd
> > > #
> > > PollRcvdCmd:             /var/spool/fax/bin/pollrcvd
> > >
> > > I have a FaxRcvdCmd. I don't use the Poll mode, so I can't help you
> > > there. Can that be a reason? And my
> > >
> > > # "FaxReceiveUser" is the user when c2faxrecv is run. This user can be
> > > # changed only by the Superuser or "root" user. If c2faxrecv is started
> > > by # another user, this entry will be ignored. Here it is a good idea
> > > to enter a # value other than the hylafax default value "fax", for
> > > instance, if the # rights of /dev/capi20 are not to be changed or your
> > > Linux distribution # requires another user.
> > > #
> > > # default   ""
> > > #
> > > FaxReceiveUser:         root #fax
> > >
> > > is root. As far as I can remember, I had to supply the faxreceiveuser
> > > root, cause the different components (device, hylafax, capi, etc..)
> > > have different users and groups, so that was the only way that they
> > > worked together.
> > >
> > > Lívio Cipriano
> > >
> > > ----- Original Message -----
> > > Hi,
> > >
> > > since I'm trying on this for 3d now, there are no obvious questions,
> > > because I really don't know what is wrong!
> > >
> > > Am Montag, 10. Juli 2006 17:57 schrieb Lívio Cipriano:
> > > > Hi,
> > > >
> > > > Your dev must be /dev/isdnctrl1:
> > >
> > > Ok that.
> > >
> > > > "kcapi: Controller 1: fcpci-d000-201 attached"
> > > >
> > > > You don't have to link anything. Let me put you some questions, even
> > > > if to obvious:
> > > >
> > > > Are you doing the instalation and testing it logged as root?;
> > >
> > > yes I'm root on the system
> > >
> > > > Do you have, under fax/etc/ the config and config.faxCAPI files?
> > >
> > > yes I have
> > >
> > > > After changing those files, do you reboot the host?
> > >
> > > i tried bouth
> > >
> > > for sure I put the mail Aspects of the config file here:
> > >
> > > config:
> > > #ContCoverPage:         "etc/cover.templ"
> > > #DestControls:          "etc/destctrls"
> > > #DialStringRules:       "etc/dialrules"
> > > #QualifyCID:            "etc/cid"
> > > #QualifyTSI:            "etc/tsi"
> > > #ServerTracing:         0x08501
> > > InternationalPrefix:    00
> > > SendFaxCmd:             /usr/bin/c2faxsend
> > >
> > >
> > >
> > >
> > > config.faxCAPI
> > >
> > > SpoolDir:               /var/spool/hylafax
> > > PollRcvdCmd:             /var/spool/hylafax/bin/pollrcvd
> > > FaxReceiveUser:         uucp
> > > FaxReceiveGroup:        dialout
> > > LogFile:                /var/spool/hylafax/log/capi4hylafax
> > > LogTraceLevel:          4
> > > LogFileMode:            0600
> > > HylafaxDeviceName:          faxCAPI it is liked s.d.
> > > RecvFileMode:               0600
> > > # ----------- incoming params -----------
> > > Controller:             1
> > > AcceptSpeech:           0
> > > UseDDI:                 0
> > > IncomingMSNs: faxnumber
> > > AcceptGlobalCall:   1
> > >
> > >
> > > babylon5:/dev# tail -f /var/spool/hylafax/log/capi4hylafax
> > >
> > > Device "faxCAPI" uses 2 receive thread(s) with the following config:
> > > Jul 10 18:32:50.32: [ 7896]: c2faxrecv - INFO: Controller=1 :
> > > IncomingMSNs=fuxnumber
> > > Jul 10 18:32:50.32: [ 7896]: c2faxrecv - INFO:
> > >
> > > So I hope I didn't vorget someting :-)
> > >
> > > ____________________ HylaFAX(tm) Users Mailing List
> > > _______________________ To subscribe/unsubscribe, click
> > > http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe
> > > hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about
> > > commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
> > >
> > > ____________________ HylaFAX(tm) Users Mailing List
> > > _______________________ To subscribe/unsubscribe, click
> > > http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe
> > > hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about
> > > commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
> >
> > ____________________ HylaFAX(tm) Users Mailing List
> > _______________________ To subscribe/unsubscribe, click
> > http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe
> > hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial
> > HylaFAX(tm) support, mail sales@xxxxxxxxx*
>
> ____________________ HylaFAX(tm) Users Mailing List _______________________
>   To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
>   *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*