 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
Re: [hylafax-users] Problem Receiving Faxes
- To: "'Lee Howard'" <faxguy@xxxxxxxxxxxxxxxx>
- Subject: Re: [hylafax-users] Problem Receiving Faxes
- From: "Mariano Guelar" <mariano@xxxxxxxxxxxxxxxx>
- Cc: <hylafax-users@xxxxxxxxxxx>
- Date: Mon, 10 Jul 2006 17:56:13 -0300
Hi, I used to have hylafax 4.2.1 but I upgraded the RPM to the last one: [root@FAX log]# rpm -qa |grep hylafax hylafax-4.3.0-2fc4 This is the output with SessionTracing 0xFFF Jul 10 16:47:34.22: [14876]: SESSION BEGIN 000007641 5817404005 Jul 10 16:47:34.22: [14876]: HylaFAX (tm) Version 4.3.0 Jul 10 16:47:34.22: [14876]: MODEM set XON/XOFF/FLUSH: input ignored, output disabled Jul 10 16:47:34.22: [14876]: <-- [4:ATA\r] Jul 10 16:47:43.96: [14876]: --> [7:CONNECT] Jul 10 16:47:43.96: [14876]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyS0' Jul 10 16:47:43.96: [14876]: STATE CHANGE: ANSWERING -> RECEIVING Jul 10 16:47:43.96: [14876]: RECV FAX: begin Jul 10 16:47:43.96: [14876]: <-- HDLC<32:FF C0 04 B5 00 AA 12 9E 36 86 62 82 1A 04 14 2E B6 94 04 6A A6 4E CE 96 F6 76 04 2C 74 CC 7 4 0C> Jul 10 16:47:43.96: [14876]: <-- data [32] Jul 10 16:47:43.96: [14876]: <-- data [2] Jul 10 16:47:43.99: [14876]: --> [7:CONNECT] Jul 10 16:47:43.99: [14876]: <-- HDLC<23:FF C0 02 A6 4E 46 96 32 F6 26 86 C6 4E A6 B2 04 04 04 04 04 04 04 04> Jul 10 16:47:43.99: [14876]: <-- data [23] Jul 10 16:47:43.99: [14876]: <-- data [2] Jul 10 16:47:44.02: [14876]: --> [7:CONNECT] Jul 10 16:47:44.02: [14876]: <-- HDLC<13:FF C8 01 00 77 5F 23 01 FB C1 01 01 18> Jul 10 16:47:44.02: [14876]: <-- data [13] Jul 10 16:47:44.02: [14876]: <-- data [2] Jul 10 16:47:47.22: [14876]: --> [2:OK] Jul 10 16:47:47.22: [14876]: <-- [9:AT+FRH=3\r] Jul 10 16:47:52.20: [14876]: --> [2:OK] Jul 10 16:47:52.20: [14876]: DELAY 1500 ms Jul 10 16:47:53.70: [14876]: <-- [9:AT+FTH=3\r] Jul 10 16:47:53.75: [14876]: --> [7:CONNECT] Jul 10 16:47:53.75: [14876]: <-- HDLC<32:FF C0 04 B5 00 AA 12 9E 36 86 62 82 1A 04 14 2E B6 94 04 6A A6 4E CE 96 F6 76 04 2C 74 CC 7 4 0C> Jul 10 16:47:53.75: [14876]: <-- data [32] Jul 10 16:47:53.75: [14876]: <-- data [2] Jul 10 16:47:53.78: [14876]: --> [7:CONNECT] Jul 10 16:47:53.78: [14876]: <-- HDLC<23:FF C0 02 A6 4E 46 96 32 F6 26 86 C6 4E A6 B2 04 04 04 04 04 04 04 04> Jul 10 16:47:53.78: [14876]: <-- data [23] Jul 10 16:47:53.78: [14876]: <-- data [2] Jul 10 16:47:53.80: [14876]: --> [7:CONNECT] Jul 10 16:47:53.80: [14876]: <-- HDLC<13:FF C8 01 00 77 5F 23 01 FB C1 01 01 18> Jul 10 16:47:53.80: [14876]: <-- data [13] Jul 10 16:47:53.80: [14876]: <-- data [2] Jul 10 16:47:57.01: [14876]: --> [2:OK] Jul 10 16:47:57.01: [14876]: <-- [9:AT+FRH=3\r] Jul 10 16:47:59.24: [14876]: --> [7:CONNECT] Jul 10 16:48:01.01: [14876]: --> [2:10 03] Jul 10 16:48:01.01: [14876]: --> [2:OK] Jul 10 16:48:01.01: [14876]: HDLC frame too short (0 bytes) Jul 10 16:48:01.01: [14876]: DELAY 70 ms Jul 10 16:48:01.09: [14876]: <-- [9:AT+FTH=3\r] Jul 10 16:48:01.13: [14876]: --> [7:CONNECT] Jul 10 16:48:01.13: [14876]: <-- HDLC<3:FF C8 58> Jul 10 16:48:01.13: [14876]: <-- data [3] Jul 10 16:48:01.13: [14876]: <-- data [2] Jul 10 16:48:02.45: [14876]: --> [2:OK] Jul 10 16:48:02.45: [14876]: RECV send CRP (command repeat) Jul 10 16:48:02.45: [14876]: <-- [9:AT+FRH=3\r] Jul 10 16:48:07.41: [14876]: --> [2:OK] Jul 10 16:48:07.41: [14876]: DELAY 1500 ms Jul 10 16:48:08.91: [14876]: <-- [9:AT+FTH=3\r] Jul 10 16:48:08.95: [14876]: --> [7:CONNECT] Jul 10 16:48:08.95: [14876]: <-- HDLC<32:FF C0 04 B5 00 AA 12 9E 36 86 62 82 1A 04 14 2E B6 94 04 6A A6 4E CE 96 F6 76 04 2C 74 CC 7 4 0C> Jul 10 16:48:08.95: [14876]: <-- data [32] Jul 10 16:48:08.95: [14876]: <-- data [2] Jul 10 16:48:08.98: [14876]: --> [7:CONNECT] Jul 10 16:48:08.98: [14876]: <-- HDLC<23:FF C0 02 A6 4E 46 96 32 F6 26 86 C6 4E A6 B2 04 04 04 04 04 04 04 04> Jul 10 16:48:08.98: [14876]: <-- data [23] Jul 10 16:48:08.98: [14876]: <-- data [2] Jul 10 16:48:09.01: [14876]: --> [7:CONNECT] Jul 10 16:48:09.01: [14876]: <-- HDLC<13:FF C8 01 00 77 5F 23 01 FB C1 01 01 18> Jul 10 16:48:09.01: [14876]: <-- data [13] Jul 10 16:48:09.01: [14876]: <-- data [2] Jul 10 16:48:12.21: [14876]: --> [2:OK] Jul 10 16:48:12.21: [14876]: <-- [9:AT+FRH=3\r] Jul 10 16:48:15.07: [14876]: --> [7:CONNECT] Jul 10 16:48:17.45: [14876]: --> [2:10 03] Jul 10 16:48:17.45: [14876]: --> [2:OK] Jul 10 16:48:17.45: [14876]: HDLC frame too short (0 bytes) Jul 10 16:48:17.45: [14876]: DELAY 70 ms Jul 10 16:48:17.52: [14876]: <-- [9:AT+FTH=3\r] Jul 10 16:48:17.57: [14876]: --> [7:CONNECT] Jul 10 16:48:17.57: [14876]: <-- HDLC<3:FF C8 58> Jul 10 16:48:17.57: [14876]: <-- data [3] Jul 10 16:48:17.57: [14876]: <-- data [2] Jul 10 16:48:18.88: [14876]: --> [2:OK] Jul 10 16:48:18.88: [14876]: RECV send CRP (command repeat) Jul 10 16:48:18.88: [14876]: <-- [9:AT+FRH=3\r] Jul 10 16:48:25.88: [14876]: --> [0:] Jul 10 16:48:25.88: [14876]: MODEM <Empty line> Jul 10 16:48:25.88: [14876]: MODEM TIMEOUT: waiting for v.21 carrier Jul 10 16:48:25.88: [14876]: <-- data [1] Jul 10 16:48:26.09: [14876]: MODEM TIMEOUT: reading line from modem Jul 10 16:48:26.09: [14876]: MODEM <Timeout> Jul 10 16:48:26.09: [14876]: RECV FAX: No answer (T.30 T1 timeout) Jul 10 16:48:26.09: [14876]: RECV FAX: end Jul 10 16:48:26.09: [14876]: SESSION END Thanks for your help!! Regards, Mariano -----Mensaje original----- De: hylafax-users-bounce@xxxxxxxxxxx [mailto:hylafax-users-bounce@xxxxxxxxxxx] En nombre de Lee Howard Enviado el: Lunes, 10 de Julio de 2006 05:39 p.m. Para: Mariano Guelar CC: hylafax-users@xxxxxxxxxxx Asunto: Re: [hylafax-users] Problem Receiving Faxes Mariano Guelar wrote: > I,m using Hylafax 4.3.0.2 with Fedora Core 4. The Modem is detected as > "TP560 Data/Fax/Voice 56K Modem". > > Jul 10 16:12:00.09: [ 3043]: HylaFAX (tm) Version 4.3.0 Are you sure that you're running 4.3.0.2? It doesn't look like it. Do you have two installations at the same time? > Jul 10 16:12:13.06: [ 3043]: <-- [9:AT+FRH=3\r] Jul 10 16:12:18.05: [ > 3043]: --> [2:OK] Mysterious modem behavior. > Jul 10 16:12:22.86: [ 3043]: <-- [9:AT+FRH=3\r] Jul 10 16:12:26.20: [ > 3043]: --> [7:CONNECT] Jul 10 16:12:27.85: [ 3043]: --> [2:OK] Jul 10 > 16:12:27.85: [ 3043]: HDLC frame too short (0 bytes) You'll need to turn up your SessionTracing to 0xFFF for me to make more sense of this. Lee. ____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx* ____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
- Follow-Ups:
- Re: [hylafax-users] Problem Receiving Faxes
- From: Lee Howard
- Re: [hylafax-users] Problem Receiving Faxes
- Prev by Date: Re: [hylafax-users] hylafax does not answer rings
- Next by Date: Re: [hylafax-users] hylafax does not answer rings
- Previous by thread: [hylafax-users] Problem Receiving Faxes
- Next by thread: Re: [hylafax-users] Problem Receiving Faxes
- Index(es):
Project hosted by iFAX Solutions