Re: [hylafax-users] hylafax does not answer rings

[Lívio Cipriano <lcipriano@xxxxxx>]

Hi Steve,

Try to call your fax number from a cell phone and tell me what do you ear or 
what kind of respond do you obtain.

Lívio Cipriano 

----- Original Message -----
Hi,

yes debian installs everything to /var/spool/hylafax. /var/spool/fax I don't
hava as directory.

Am Montag, 10. Juli 2006 19:48 schrieb Lívio Cipriano:
> Sorry another "stupid question", but SuSE sets the root of hylfax as
> "/var/spool/fax" and I notice that your config file mention the several
> files as having the root of hylafax at "/var/spool/hylafax". It this
> controlled?
>
> Livio Cipriano
>
> ----- Original Message -----
> Hallo Livio,
>
> i changed everything restarted the computer and still the same. The call is
> mentioned in the syslog, and ignored.
>
> Steve
>
> Am Montag, 10. Juli 2006 18:53 schrieb Lívio Cipriano:
> > Hi
> >
> > There are some differences between our config files. My config
> >
> > LogFacility:		daemon
> > CountryCode:		351
> > AreaCode:		1
> > LongDistancePrefix:	1
> > InternationalPrefix:	00
> > DialStringRules:	"etc/dialrules"
> > ServerTracing:		1
> > SessionTracing:		0xffffffff
> > MaxConcurrentCalls:	2
> > MaxSendPages:		1024
> > ModemGroup:		any:.*
> > SendFaxCmd:		/var/spool/fax/bin/faxsend
> >
> > From memory, I remember that ModemGroup was very importante, but I can
> > remember why.
> >
> > My config.faxCAPI was 3 main differences
> >
> > # "FaxRcvdCmd" gibt das Skript an, das ausgefhrt wird, sobald ein Fax
> > # empfangen wurde. Im Stand-Alone-Betrieb werden andere Parameter
> > # bergeben als fr HylaFAX (mehr dazu im sample_faxrcvd).
> > #
> > # "FaxRcvdCmd" indicates the script performed whenever a fax is
> > # received. Parameters other than the ones for HylaFAX are returned in
> > # stand-alone operation (see sample_faxrcvd for more information).
> > #
> > # default   /var/spool/hylafax/bin/faxrcvd
> > #
> > FaxRcvdCmd:		/var/spool/fax/bin/faxrcvd
> >
> >
> > # "PollRcvdCmd" gibt das Skript an, das ausgefhrt wird, sobald ein
> > # Fax per Faxabruf empfangen wurde. Im Stand-Alone-Betrieb werden
> > # andereParameter bergeben als fr HylaFAX (mehr dazu im
> > # sample_faxrcvd).
> > #
> > # "PollRcvdCmd" indicates the script performed whenever a fax was
> > # received by fax polling. Parameters other than the ones for HylaFAX
> > # are returned in stand-alone operation (see sample_faxrcvd for more
> > # information).
> > #
> > # default   /var/spool/hylafax/bin/pollrcvd
> > #
> > PollRcvdCmd:             /var/spool/fax/bin/pollrcvd
> >
> > I have a FaxRcvdCmd. I don't use the Poll mode, so I can't help you
> > there. Can that be a reason? And my
> >
> > # "FaxReceiveUser" is the user when c2faxrecv is run. This user can be
> > # changed only by the Superuser or "root" user. If c2faxrecv is started
> > by # another user, this entry will be ignored. Here it is a good idea to
> > enter a # value other than the hylafax default value "fax", for instance,
> > if the # rights of /dev/capi20 are not to be changed or your Linux
> > distribution # requires another user.
> > #
> > # default   ""
> > #
> > FaxReceiveUser:         root #fax
> >
> > is root. As far as I can remember, I had to supply the faxreceiveuser
> > root, cause the different components (device, hylafax, capi, etc..) have
> > different users and groups, so that was the only way that they worked
> > together.
> >
> > Lívio Cipriano
> >
> > ----- Original Message -----
> > Hi,
> >
> > since I'm trying on this for 3d now, there are no obvious questions,
> > because I really don't know what is wrong!
> >
> > Am Montag, 10. Juli 2006 17:57 schrieb Lívio Cipriano:
> > > Hi,
> > >
> > > Your dev must be /dev/isdnctrl1:
> >
> > Ok that.
> >
> > > "kcapi: Controller 1: fcpci-d000-201 attached"
> > >
> > > You don't have to link anything. Let me put you some questions, even if
> > > to obvious:
> > >
> > > Are you doing the instalation and testing it logged as root?;
> >
> > yes I'm root on the system
> >
> > > Do you have, under fax/etc/ the config and config.faxCAPI files?
> >
> > yes I have
> >
> > > After changing those files, do you reboot the host?
> >
> > i tried bouth
> >
> > for sure I put the mail Aspects of the config file here:
> >
> > config:
> > #ContCoverPage:         "etc/cover.templ"
> > #DestControls:          "etc/destctrls"
> > #DialStringRules:       "etc/dialrules"
> > #QualifyCID:            "etc/cid"
> > #QualifyTSI:            "etc/tsi"
> > #ServerTracing:         0x08501
> > InternationalPrefix:    00
> > SendFaxCmd:             /usr/bin/c2faxsend
> >
> >
> >
> >
> > config.faxCAPI
> >
> > SpoolDir:               /var/spool/hylafax
> > PollRcvdCmd:             /var/spool/hylafax/bin/pollrcvd
> > FaxReceiveUser:         uucp
> > FaxReceiveGroup:        dialout
> > LogFile:                /var/spool/hylafax/log/capi4hylafax
> > LogTraceLevel:          4
> > LogFileMode:            0600
> > HylafaxDeviceName:          faxCAPI it is liked s.d.
> > RecvFileMode:               0600
> > # ----------- incoming params -----------
> > Controller:             1
> > AcceptSpeech:           0
> > UseDDI:                 0
> > IncomingMSNs: faxnumber
> > AcceptGlobalCall:   1
> >
> >
> > babylon5:/dev# tail -f /var/spool/hylafax/log/capi4hylafax
> >
> > Device "faxCAPI" uses 2 receive thread(s) with the following config:
> > Jul 10 18:32:50.32: [ 7896]: c2faxrecv - INFO: Controller=1 :
> > IncomingMSNs=fuxnumber
> > Jul 10 18:32:50.32: [ 7896]: c2faxrecv - INFO:
> >
> > So I hope I didn't vorget someting :-)
> >
> > ____________________ HylaFAX(tm) Users Mailing List
> > _______________________ To subscribe/unsubscribe, click
> > http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe
> > hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial
> > HylaFAX(tm) support, mail sales@xxxxxxxxx*
> >
> > ____________________ HylaFAX(tm) Users Mailing List
> > _______________________ To subscribe/unsubscribe, click
> > http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe
> > hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial
> > HylaFAX(tm) support, mail sales@xxxxxxxxx*
>
> ____________________ HylaFAX(tm) Users Mailing List _______________________
>   To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
>   *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*