HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] hylafax does not answer rings



Sorry another "stupid question", but SuSE sets the root of hylfax as 
"/var/spool/fax" and I notice that your config file mention the several files 
as having the root of hylafax at "/var/spool/hylafax". It this controlled?

Livio Cipriano

----- Original Message -----
Hallo Livio,

i changed everything restarted the computer and still the same. The call is
mentioned in the syslog, and ignored.

Steve

Am Montag, 10. Juli 2006 18:53 schrieb Lívio Cipriano:
> Hi
>
> There are some differences between our config files. My config
>
> LogFacility:		daemon
> CountryCode:		351
> AreaCode:		1
> LongDistancePrefix:	1
> InternationalPrefix:	00
> DialStringRules:	"etc/dialrules"
> ServerTracing:		1
> SessionTracing:		0xffffffff
> MaxConcurrentCalls:	2
> MaxSendPages:		1024
> ModemGroup:		any:.*
> SendFaxCmd:		/var/spool/fax/bin/faxsend
>
> From memory, I remember that ModemGroup was very importante, but I can
> remember why.
>
> My config.faxCAPI was 3 main differences
>
> # "FaxRcvdCmd" gibt das Skript an, das ausgefhrt wird, sobald ein Fax
> # empfangen wurde. Im Stand-Alone-Betrieb werden andere Parameter
> # bergeben als fr HylaFAX (mehr dazu im sample_faxrcvd).
> #
> # "FaxRcvdCmd" indicates the script performed whenever a fax is
> # received. Parameters other than the ones for HylaFAX are returned in
> # stand-alone operation (see sample_faxrcvd for more information).
> #
> # default   /var/spool/hylafax/bin/faxrcvd
> #
> FaxRcvdCmd:		/var/spool/fax/bin/faxrcvd
>
>
> # "PollRcvdCmd" gibt das Skript an, das ausgefhrt wird, sobald ein
> # Fax per Faxabruf empfangen wurde. Im Stand-Alone-Betrieb werden
> # andereParameter bergeben als fr HylaFAX (mehr dazu im
> # sample_faxrcvd).
> #
> # "PollRcvdCmd" indicates the script performed whenever a fax was
> # received by fax polling. Parameters other than the ones for HylaFAX
> # are returned in stand-alone operation (see sample_faxrcvd for more
> # information).
> #
> # default   /var/spool/hylafax/bin/pollrcvd
> #
> PollRcvdCmd:             /var/spool/fax/bin/pollrcvd
>
> I have a FaxRcvdCmd. I don't use the Poll mode, so I can't help you there.
> Can that be a reason? And my
>
> # "FaxReceiveUser" is the user when c2faxrecv is run. This user can be
> # changed only by the Superuser or "root" user. If c2faxrecv is started by
> # another user, this entry will be ignored. Here it is a good idea to enter
> a # value other than the hylafax default value "fax", for instance, if the
> # rights of /dev/capi20 are not to be changed or your Linux distribution #
> requires another user.
> #
> # default   ""
> #
> FaxReceiveUser:         root #fax
>
> is root. As far as I can remember, I had to supply the faxreceiveuser root,
> cause the different components (device, hylafax, capi, etc..) have
> different users and groups, so that was the only way that they worked
> together.
>
> Lívio Cipriano
>
> ----- Original Message -----
> Hi,
>
> since I'm trying on this for 3d now, there are no obvious questions,
> because I really don't know what is wrong!
>
> Am Montag, 10. Juli 2006 17:57 schrieb Lívio Cipriano:
> > Hi,
> >
> > Your dev must be /dev/isdnctrl1:
>
> Ok that.
>
> > "kcapi: Controller 1: fcpci-d000-201 attached"
> >
> > You don't have to link anything. Let me put you some questions, even if
> > to obvious:
> >
> > Are you doing the instalation and testing it logged as root?;
>
> yes I'm root on the system
>
> > Do you have, under fax/etc/ the config and config.faxCAPI files?
>
> yes I have
>
> > After changing those files, do you reboot the host?
>
> i tried bouth
>
> for sure I put the mail Aspects of the config file here:
>
> config:
> #ContCoverPage:         "etc/cover.templ"
> #DestControls:          "etc/destctrls"
> #DialStringRules:       "etc/dialrules"
> #QualifyCID:            "etc/cid"
> #QualifyTSI:            "etc/tsi"
> #ServerTracing:         0x08501
> InternationalPrefix:    00
> SendFaxCmd:             /usr/bin/c2faxsend
>
>
>
>
> config.faxCAPI
>
> SpoolDir:               /var/spool/hylafax
> PollRcvdCmd:             /var/spool/hylafax/bin/pollrcvd
> FaxReceiveUser:         uucp
> FaxReceiveGroup:        dialout
> LogFile:                /var/spool/hylafax/log/capi4hylafax
> LogTraceLevel:          4
> LogFileMode:            0600
> HylafaxDeviceName:          faxCAPI it is liked s.d.
> RecvFileMode:               0600
> # ----------- incoming params -----------
> Controller:             1
> AcceptSpeech:           0
> UseDDI:                 0
> IncomingMSNs: faxnumber
> AcceptGlobalCall:   1
>
>
> babylon5:/dev# tail -f /var/spool/hylafax/log/capi4hylafax
>
> Device "faxCAPI" uses 2 receive thread(s) with the following config:
> Jul 10 18:32:50.32: [ 7896]: c2faxrecv - INFO: Controller=1 :
> IncomingMSNs=fuxnumber
> Jul 10 18:32:50.32: [ 7896]: c2faxrecv - INFO:
>
> So I hope I didn't vorget someting :-)
>
> ____________________ HylaFAX(tm) Users Mailing List _______________________
>   To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
>   *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
>
> ____________________ HylaFAX(tm) Users Mailing List _______________________
>   To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
>   *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




Project hosted by iFAX Solutions