Re: [hylafax-users] T1 PRI Question, Can this be done and has anyone ever done it

["John Warren" <jwarren@xxxxxxxxxxxxx>]

I'd be running 22 channels doing outbound fax at night with one taking
inbound. During working hours, when the voice traffic is higher, all fax
traffic would be limited to 6 channels.  I've read that jitter can be a
problem with IAXModem but I don't know if that's true or not. Also, I don't
know if anyone has run that many fax channels with IAXModem.

The system configuration is a Dell 2650 Dual Xeon 2.8 GHz. Currently running
2GB of ram but that's going up if I have any reason to think I'll run into a
swapping issue.


-----Original Message-----
From: Stephen Gerstacker [mailto:sgerstacker@xxxxxxxxxxxxxxxxxxxx] 
Sent: Thursday, May 25, 2006 2:45 PM
To: 'John Warren'; 'Lee Howard'
Cc: hylafax-users@xxxxxxxxxxx
Subject: RE: [hylafax-users] T1 PRI Question, Can this be done and has anyone
ever done it


I'm currently using an IAXModem + Asterisk + Hylafax setup and it works
flawlessly.  We do all of our faxing in and out via the virtual modems on
our PRI.

Stephen Gerstacker

-----Original Message-----
From: hylafax-users-bounce@xxxxxxxxxxx
[mailto:hylafax-users-bounce@xxxxxxxxxxx] On Behalf Of John Warren
Sent: Thursday, May 25, 2006 16:39
To: 'Lee Howard'
Cc: hylafax-users@xxxxxxxxxxx
Subject: Re: [hylafax-users] T1 PRI Question, Can this be done and has
anyone ever done it

Same here but in this case the PBX can only have one T1 card. I'm looking at
replacing it with an Asterisk system.

-----Original Message-----
From: Lee Howard [mailto:faxguy@xxxxxxxxxxxxxxxx] 
Sent: Thursday, May 25, 2006 10:46 AM
To: John Warren
Cc: hylafax-users@xxxxxxxxxxx
Subject: Re: [hylafax-users] T1 PRI Question, Can this be done and has
anyone
ever done it


John Warren wrote:

>Has anyone ever put a Hylafax system between a ISDN PRI and a PBX?
>
>Telco T1 PRI<----> T1 PRI (HylaFax) T1 PRI <----> T1 PRI (PBX)
>
>I've seen something about this when both Astrisk and Hylafax were on the
same
>computer but nothing on a configuration like this. I would expect that the
>software controlling the T1 card(s) would be dong the routing and not
Hylafax.
>

I've not done a HylaFAX system between the telco and the PBX, but I have 
put a T1 PBX between the telco and the HylaFAX system:

Telco T1 PRI <---> T1 PRI PBX <---> T1 PRI HylaFAX

Lee.


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*