Re: [hylafax-users] Multi port dialing order

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

Each modem config file specifies its own ModemPriority.

Lee.


joea wrote:

> So, which config file would this go in?  
>
> config or each modem config?
>
> joea
>
> Lee Howard<faxguy@xxxxxxxxxxxxxxxx> Boldly Declared: 5/25/2006 7:22 PM:
>  
>
> > joea wrote:
> >
> >    
> >
> > > Want to bias (weight) ports on a multi modem system (4 modems) so that, for 
> > > Want outgoing FAX, two lines are preferred over the others.
> > >
> > > See how to do this on the fly using "faxconfig -m ttyf2 ModemPriority nn".
> > >
> > > Seems this could be done with "ModemPriority" in the config files, but not 
> > > Seems seeing where, yet.
> > >
> > > Or does it stay fixed with the above command, until changed again?
> > >
> > >      
> > The modem config files are re-read with such frequency that almost any 
> > change made with faxconfig that you wish to be permanent will also need 
> > to be changed in the modem config files.  Otherwise I suspect the 
> > setting will only apply until the next time the config file is read-in.
> >
> > Lee.
> >    
>
>
> ____________________ HylaFAX(tm) Users Mailing List _______________________
>  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
> On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
>  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
>
>
>  


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*