Re: [hylafax-users] Errors in fax logs...

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

This particular error represents a bug in HylaFAX.  What version are you 
using?

Lee.


Oxenberg, Barry wrote:

> Hi,
> Would someone please tell me if the below indicates a problem with the 
> modem, software, or the sender (maybe all the above)?
> Mostly I want to know if this is anything I should be concerned about.
> Thanks,
> Barry
>  
>  
> May 11 17:40:03.86: [ 2708]: --> [10:NO CARRIER]
> May 11 17:40:03.86: [ 2708]: <-- [9:AT+FRH=3\r]
> May 11 17:40:04.32: [ 2708]: --> [7:CONNECT]
> May 11 17:40:05.16: [ 2708]: --> HDLC<5:FF C8 F2 AC A0>
> May 11 17:40:05.16: [ 2708]: --> [2:OK]
> May 11 17:40:05.16: [ 2708]: RECV recv MPS (more pages, same document)
> May 11 17:40:05.16: [ 2708]: <-- [9:AT+FRS=7\r]
> May 11 17:40:05.38: [ 2708]: --> [2:OK]
> May 11 17:40:05.38: [ 2708]: <-- [9:AT+FTH=3\r]
> May 11 17:40:05.52: [ 2708]: --> [7:CONNECT]
> May 11 17:40:05.52: [ 2708]: RECV send MCF (message confirmation)
> May 11 17:40:05.52: [ 2708]: RECV FAX (000055795): from 5018345886, 
> page 12 in 0:32, INF, 3.85 line/mm, 1-D MH, 9600 bit/s
> May 11 17:40:05.52: [ 2708]: <-- HDLC<3:FF C8 31>
> May 11 17:40:05.52: [ 2708]: <-- data [3]
> May 11 17:40:05.52: [ 2708]: <-- data [2]
> May 11 17:40:06.84: [ 2708]: --> [2:OK]
> May 11 17:40:08.80: [ 2708]: MODEM TIMEOUT: sending HDLC frame
> May 11 17:40:08.80: [ 2708]: MODEM input buffering enabled
> May 11 17:40:08.80: [ 2708]: <-- [10:AT+FRM=96\r]
> May 11 17:40:15.79: [ 2708]: MODEM TIMEOUT: reading line from modem
> May 11 17:40:15.79: [ 2708]: <-- data [1]
> May 11 17:40:15.90: [ 2708]: --> [2:OK]
> May 11 17:40:15.90: [ 2708]: RECV FAX (000055795): 
> recvq/fax000038773.tif from 5018345886, route to <unspecified>, 12 
> pages in 6:18
> May 11 17:40:15.90: [ 2708]: RECV FAX: T.30 T2 timeout, expected page 
> not received
> May 11 17:40:15.90: [ 2708]: <-- [9:AT+FTH=3\r]
> May 11 17:40:16.04: [ 2708]: --> [7:CONNECT]
> May 11 17:40:16.04: [ 2708]: <-- HDLC<3:FF C8 5F>
> May 11 17:40:16.04: [ 2708]: <-- data [3]
> May 11 17:40:16.04: [ 2708]: <-- data [2]
> May 11 17:40:17.35: [ 2708]: --> [2:OK]
> May 11 17:40:17.35: [ 2708]: MODEM input buffering enabled
> May 11 17:40:17.35: [ 2708]: RECV FAX (000055795): session with 
> 5018345886 terminated abnormally: T.30 T2 timeout, expected page not 
> received
> May 11 17:40:17.35: [ 2708]: RECV FAX: bin/faxrcvd 
> "recvq/fax000038773.tif" "ttyR3" "000055795" "T.30 T2 timeout, 
> expected page not received" "" ""
> May 11 17:40:17.35: [ 2708]: RECV FAX: end
> May 11 17:40:17.35: [ 2708]: SESSION END
>  
>
> **********************************************************************
> This message contains confidential information intended only for the 
> use of the addressee(s) named above and may contain information that 
> is legally privileged.  If you are not the addressee, or the person 
> responsible for delivering it to the addressee, you are hereby 
> notified that reading, disseminating, distributing or copying this 
> message is strictly prohibited.  If you have received this message by 
> mistake, please immediately notify us by replying to the message and 
> delete the original message immediately thereafter.
>
> Thank you.
>
>                                                                                                                          
> FADLD Tag
> **********************************************************************


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*