Re: [hylafax-users] Adaptive answer, MT5634ZBA-V92 (was Receive problems with MT2834ZDX modems)

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

Bill Campbell wrote:

> Mar 21 16:47:08.19: [ 5676]: SESSION BEGIN 000005548 12062329186
> Mar 21 16:47:08.19: [ 5676]: HylaFAX (tm) Version 4.2.5
> Mar 21 16:47:08.19: [ 5676]: <-- [4:ATA\r]
> Mar 21 16:47:15.74: [ 5676]: --> [3:FAX]
> Mar 21 16:47:15.74: [ 5676]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS0'
> Mar 21 16:47:15.74: [ 5676]: RECV FAX: begin
> Mar 21 16:47:15.74: [ 5676]: MODEM flush i/o
> Mar 21 16:47:15.74: [ 5676]: <-- data [32]
> Mar 21 16:47:15.74: [ 5676]: <-- data [2]
> Mar 21 16:47:20.02: [ 5676]: --> [6:^H ^H^H ^H]
> Mar 21 16:47:20.02: [ 5676]: DELAY 1500 ms
> Mar 21 16:47:21.52: [ 5676]: <-- [9:AT+FTH=3\r]
> Mar 21 16:47:21.52: [ 5676]: --> [7:CONNECT]
> Mar 21 16:47:21.52: [ 5676]: <-- data [32]
> Mar 21 16:47:21.52: [ 5676]: <-- data [2]
> Mar 21 16:47:22.92: [ 5676]: --> [2:OK]
> Mar 21 16:47:22.92: [ 5676]: DELAY 1500 ms
> 	The other side went away about here.

Well, on the bright side it appears that the patch did what it was 
supposed to do: that is, HylaFAX now does not see the duplicated "FAX" 
response.  The downside, of course, is that fax reception is still not 
going.  So we're half-way there.

Hopefully this is just an issue of command-response-reaction 
misunderstanding between HylaFAX and the modem... if it is then we can 
fix things.  If not, then you'll either need to turn to MultiTech for 
support on this (firmware with a bug fix?) or try to get your 
DistinctiveRing going (which probably will serve you better in the 
long-run anyway).

Stop running faxgetty on this modem.  Open it up with minicom instead.  
Send the following commands:

 <-- ATZ
 --> OK
 <-- ATS0=0
 --> OK
 <-- AT+FCLASS=1
 --> OK
 <-- AT+FAA=1
 --> OK

And then place a fax call to that modem.  You should see "RING" messages 
appear.  When you do then give the "ATA" command.  Then tell me what 
happens.  It should go something like this:

 --> RING
 <-- ATA
 --> FAX

I want to know if anything happens after "FAX" or if it just sits there 
and finally (probably after 5 seconds) reports ERROR or NO CARRIER.

Thanks,

Lee.


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*