Re: [hylafax-users] MT5634ZBA-V92 with Hylafax

[Giulio Orsero <giulioo@xxxxxxxxx>]

On Wed, 23 Mar 2005 01:08:04 +0100, Sam Przyswa <samp@xxxxxxxxxxxxxxxxx>
wrote:

>>>So , *PLEASE*, give me the right configuration (config.ttySx) to make me
>>>able to receive faxes and data calls with the MT5634ZBA-V92

>The lucent-mt-10 can not initialize modem, but I used the lucent-mt-2, 
>just added "ModemSetupAACmd:  AT+FAA=1" for adaptive answer and it's 
>work now !
Ok, but if you really have a MT5634ZBA-V92, then consider that one of its
main feature is the ability to send faxes at speeds up to 33k (as opposed to
normal faxmodem 14k maximum); this feature is available if you use it in
class1.0 (lucent-mt-10) or class2.1 (lucent-mt-21).
If you use it in class2 you lose this, and you may also lose high fax data
compression (2d-mmr) and other things.

So, once your setup is very stable, maybe retry class1.0 (not class1)

>Mar 22 19:24:46 prod1 FaxQueuer[30663]: NOTIFY: bin/notify "doneq/q17" 
>"no_formatter" ""

Usually no_formatter means your ghostscript installation is broken or
HylaFAX thinks it's so; have you re-run faxsetup?

-- 
giulioo@xxxxxxxxx

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*