HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] MT5634ZBA-V92 with Hylafax



On Tue, 22 Mar 2005 14:26:32 +0100, Sam Przyswa <samp@xxxxxxxxxxxxxxxxx> wrote:
> can't nor receive and send data call, and the incoming fax are
> corrupted, see the attachment.
> So , *PLEASE*, give me the right configuration (config.ttySx) to make me
> able to receive faxes and data calls with the MT5634ZBA-V92

1) fax usage
If you actually cannot get faxaddmodem to see the modem, then install
by hand the file /var/spool/hylafax/config/lucent-mt-10 as you config
file (ie: /var/spool//ylafax/etc/config.ttyS0)
Then restart faxgetty and try sending and receiving faxes.

2) data call usage
To make data calls work you have to config HylaFAX for it, it usually
won't work out of the box because it really depends on the data getty
you are using. I assume mgetty?

So first you need to set up auto answer, usually with
ModemSetupAACmd:        AT+FAA=1
then you need to setup HylaFAx for mgetty, usually with
GettyArgs:              "-b -r -s %s %l"
then you need to set up mgetty.config file, usually with
toggle-dtr no    (in mgetty.config)

It may be useful to use the same serial speed, so since lucent-mt-10
uses 57600, use that too in mgetty.config
speed 57600

Then you need to hope the modem will be able to succesfully discern
between data and fax calls.


-- 
giulioo@xxxxxxxxx

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




Project hosted by iFAX Solutions